ERJ-S08F1432V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F1432V is a 14.3 kOhms ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in harsh environments. The part is currently active in production with 648 units in stock.

Substitute parts become necessary when the primary part reaches end-of-life status, inventory constraints occur, or design flexibility is required across multiple qualified suppliers while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	14.3 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	MSL 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Resistance Value: 14.3 kOhms (exact match required)
Tolerance: ±1% (exact match required)
Power Rating: 0.25W (exact match required)
Package Type: 1206 (3216 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature Coefficient: ±100ppm/°C (exact match required)
Operating Temperature Range: -55°C to 155°C (exact match required)
Environmental Compliance: ROHS3 Compliant, MSL 1 (exact match required)

All substitute parts listed meet these criteria and are therefore electrically and mechanically interchangeable with the ERJ-S08F1432V in standard PCB assembly processes.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Product Status	AEC-Q200	RoHS3	MSL
ERJ-S08F1432V	Panasonic	14.3 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Active	Yes	Yes	1
ERJ-8ENF1432V	Panasonic	14.3 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Not For New Designs	Yes	Yes	1
AC1206FR-0714K3L	YAGEO	14.3 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Active	Yes	Yes	1
CR1206-FX-1432ELF	Bourns Inc.	14.3 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Active	No	Yes	1
CRCW120614K3FKEA	Vishay Dale	14.3 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Active	Yes	Yes	1
RC1206FR-0714K3L	YAGEO	14.3 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Active	No	Yes	1
RMCF1206FT14K3	Stackpole Electronics Inc	14.3 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Active	Yes	Yes	1

Engineering Selection Recommendations

For Automotive AEC-Q200 Applications: Select from CRCW120614K3FKEA (Vishay Dale), RMCF1206FT14K3 (Stackpole Electronics Inc), or AC1206FR-0714K3L (YAGEO). All three maintain active production status and carry AEC-Q200 certification equivalent to the primary part.

For Non-Automotive Applications: CR1206-FX-1432ELF (Bourns Inc.) and RC1206FR-0714K3L (YAGEO) are suitable alternatives. Both are active production parts with ROHS3 compliance and MSL 1 rating, though they do not carry AEC-Q200 certification.

Avoid New Designs: ERJ-8ENF1432V is marked "Not For New Designs" and should not be selected for new product development, despite full electrical and mechanical equivalence.

Preferred Substitutes for Active Production: CRCW120614K3FKEA, RMCF1206FT14K3, and AC1206FR-0714K3L offer the best long-term availability and compliance profile.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF1432V be used as a direct replacement for ERJ-S08F1432V?

A: Electrically and mechanically, yes. However, ERJ-8ENF1432V is marked "Not For New Designs" and should only be used for legacy product maintenance or repair applications where the original part is no longer available.

Q: Are there differences in physical dimensions between substitute parts?

A: Minor variations exist. ERJ-S08F1432V, CR1206-FX-1432ELF, and RMCF1206FT14K3 measure 0.126" L × 0.063" W (3.20mm × 1.60mm). AC1206FR-0714K3L and RC1206FR-0714K3L measure 0.122" L × 0.063" W (3.10mm × 1.60mm). Height differences range from 0.024" to 0.030" (0.60mm to 0.75mm). These variations are within standard 1206 package tolerances and do not affect PCB assembly compatibility.

Q: Which substitute is best for automotive applications?

A: CRCW120614K3FKEA, RMCF1206FT14K3, and AC1206FR-0714K3L all carry AEC-Q200 certification. Selection should be based on supplier availability and inventory levels.

Q: Do all substitutes have the same moisture sensitivity rating?

A: Yes. All listed parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity concerns during storage or handling.

Q: What is the difference between "Anti-Sulfur" and "Moisture Resistant" features?

A: Anti-sulfur coating (ERJ-S08F1432V) protects against sulfur-containing atmospheric corrosion. Moisture resistant (AC1206FR-0714K3L, CR1206-FX-1432ELF, RC1206FR-0714K3L) provides protection against moisture ingress. Both are protective features; the specific requirement depends on application environment.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message