ERJ-S08F13R7V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F13R7V is a 13.7 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part is classified as Active status and features anti-sulfur coating with automotive AEC-Q200 qualification. Substitute parts are necessary when the primary part experiences supply constraints, extended lead times, or when design flexibility permits component sourcing from alternative manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

ERJ-S08F13R7V

Panasonic Electronic ComponentsIn Stock: 959ERJ-S08F13R7V Datasheet

Current PartRFQ

ERJ-8ENF13R7V

Panasonic Electronic ComponentsIn Stock: 37461ERJ-8ENF13R7V Datasheet

SimilarRFQ

CRCW120613R7FKEA

Vishay DaleIn Stock: 15703CRCW120613R7FKEA Datasheet

SimilarRFQ

RC1206FR-0713R7L

YAGEOIn Stock: 7341RC1206FR-0713R7L Datasheet

SimilarRFQ

RMCF1206FT13R7

Stackpole Electronics IncIn Stock: 13587RMCF1206FT13R7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F13R7V is determined by strict equivalence across the following parameters:

• Resistance value: 13.7 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

All substitute parts listed meet these core electrical and mechanical requirements. Differences in physical dimensions (length, width, height) and feature variations (anti-sulfur coating, automotive ratings) do not prevent functional substitution but may require design review for specific applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (ERJ-S08F13R7V): Recommended for new designs. Active product status with anti-sulfur coating and automotive AEC-Q200 qualification. Suitable for automotive and harsh environment applications.

Alternative Selection (CRCW120613R7FKEA): Active status from Vishay Dale. Meets all electrical and mechanical requirements. Suitable for general industrial and automotive applications with AEC-Q200 qualification.

Alternative Selection (RMCF1206FT13R7): Active status from Stackpole Electronics. Meets all electrical and mechanical requirements. Automotive AEC-Q200 qualified. Suitable for automotive applications.

Alternative Selection (RC1206FR-0713L): Active status from YAGEO. Meets all electrical and mechanical requirements. Features moisture-resistant coating. Suitable for general industrial applications.

Not Recommended for New Designs (ERJ-8ENF13R7V): Although electrically and mechanically equivalent, this part carries "Not For New Designs" status. Use only for legacy system maintenance or replacement applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S08F13R7V be directly replaced with ERJ-8ENF13R7V? A: Electrical and mechanical compatibility is confirmed. However, ERJ-8ENF13R7V is designated "Not For New Designs." Use only for legacy system support or direct replacement scenarios.

Q: Are all substitute parts automotive-qualified? A: ERJ-S08F13R7V, CRCW120613R7FKEA, and RMCF1206FT13R7 carry AEC-Q200 automotive qualification. RC1206FR-0713R7L does not list automotive qualification but meets all electrical and mechanical parameters.

Q: What is the significance of anti-sulfur coating on ERJ-S08F13R7V? A: Anti-sulfur coating is a feature of the primary part. Substitute parts without this feature remain electrically and mechanically compatible but may differ in environmental resistance characteristics.

Q: Are physical dimension differences significant? A: All parts use 1206 package. Minor variations in length (0.122" to 0.126"), width (0.063"), and height (0.024" to 0.028") are within standard 1206 tolerances and do not affect PCB footprint compatibility.

Q: Can these parts be used interchangeably in automotive applications? A: Parts with AEC-Q200 qualification (ERJ-S08F13R7V, ERJ-8ENF13R7V, CRCW120613R7FKEA, RMCF1206FT13R7) are suitable for automotive use. RC1206FR-0713R7L lacks automotive certification and requires design review for automotive applications.