ERJ-S06F6193V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F6193V is a 619 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in automotive and industrial environments. The part is currently active in production with 809 units in stock.

Substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating, temperature coefficient) and mechanical compatibility (package type, dimensions, termination count) while maintaining equivalent performance characteristics and compliance ratings.

Key Parameters

Parameter	Value
Resistance	619 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Number of Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F6193V are qualified based on the following criteria:

Electrical Parameters (Must Match):

Resistance value: 619 kOhms
Tolerance: ±1%
Power rating: 0.125W (1/8W)
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

Package type: 0805 (2012 Metric)
Number of terminations: 2
Composition: Thick Film

Compliance & Environmental (Must Match or Exceed):

RoHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)
REACH Unaffected status

All identified substitute parts meet these criteria and are functionally equivalent for direct replacement in circuit applications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Height (Max)	AEC-Q200	RoHS3	Inventory
ERJ-S06F6193V	Panasonic	619 kOhms	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.028" (0.70mm)	Yes	Yes	809
ERJ-6ENF6193V	Panasonic	619 kOhms	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.028" (0.70mm)	Yes	Yes	40076
CRCW0805619KFKEA	Vishay Dale	619 kOhms	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.020" (0.50mm)	Yes	Yes	20056
RC0805FR-07619KL	YAGEO	619 kOhms	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.024" (0.60mm)	No	Yes	25551
RMCF0805FT619K	Stackpole Electronics	619 kOhms	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.026" (0.65mm)	Yes	Yes	1900

Engineering Selection Recommendations

All substitute parts listed are functionally equivalent and meet the core electrical and mechanical requirements for direct replacement of the ERJ-S06F6193V.

For automotive applications requiring AEC-Q200 qualification: ERJ-6ENF6193V (Panasonic), CRCW0805619KFKEA (Vishay Dale), and RMCF0805FT619K (Stackpole Electronics) are qualified options. ERJ-6ENF6193V offers the highest inventory availability (40076 units).

For general industrial applications: RC0805FR-07619KL (YAGEO) is a suitable alternative with moisture-resistant characteristics, though it does not carry AEC-Q200 automotive qualification.

Height considerations: All parts fit within standard 0805 package height specifications. CRCW0805619KFKEA has the lowest seated height at 0.020" (0.50mm), which may be advantageous in space-constrained designs.

All substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard manufacturing and storage conditions.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF6193V directly replace ERJ-S06F6193V?

A: Yes. Both parts share identical electrical specifications (619 kOhms ±1%, 0.125W, ±100ppm/°C), operate across the same temperature range (-55°C ~ 155°C), use the same 0805 package, and carry AEC-Q200 automotive qualification. The primary difference is the series designation (ERJ-6EN vs. ERJ-S06), reflecting different manufacturing lines within Panasonic's product portfolio.

Q: What is the difference between AEC-Q200 qualified and non-qualified parts?

A: AEC-Q200 qualification indicates the part meets automotive industry reliability standards including stress testing, failure rate analysis, and quality assurance protocols. RMCF0805FT619K, CRCW0805619KFKEA, and ERJ-6ENF6193V carry this qualification. RC0805FR-07619KL does not. For automotive applications, AEC-Q200 qualified parts are required.

Q: Are there height differences that affect PCB assembly?

A: Yes. Seated heights vary slightly: ERJ-S06F6193V and ERJ-6ENF6193V at 0.028" (0.70mm), RC0805FR-07619KL at 0.024" (0.60mm), RMCF0805FT619K at 0.026" (0.65mm), and CRCW0805619KFKEA at 0.020" (0.50mm). All heights are within standard 0805 package tolerances and compatible with typical PCB assembly equipment. Verify specific height requirements for your application's design constraints.

Q: Which substitute has the best inventory availability?

A: ERJ-6ENF6193V offers the highest stock level at 40076 units, followed by RC0805FR-07619KL at 25551 units and CRCW0805619KFKEA at 20056 units.

Q: Can I use RC0805FR-07619KL in an automotive application?

A: RC0805FR-07619KL meets all electrical and mechanical specifications but lacks AEC-Q200 automotive qualification. Use only if your application does not require automotive-grade reliability certification. For automotive designs, select from AEC-Q200 qualified alternatives.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard manufacturing processes and storage conditions.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message