ERJ-S03J560V Equivalent & Substitute Parts

Part Overview

The ERJ-S03J560V is a 56 Ohm ±5% 0.1W thick film chip resistor in 0603 (1608 Metric) package manufactured by Panasonic Electronic Components. This component features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and harsh environment applications. The part is currently active in production with 1075 units in stock. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility is required while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	56 Ohms
Tolerance	±5%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Number of Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the ERJ-S03J560V is determined by strict equivalence across the following critical parameters:

Resistance value: 56 Ohms
Tolerance: ±5%
Power rating: 0.1W (1/10W)
Package: 0603 (1608 Metric)
Composition: Thick Film
Temperature coefficient: ±200ppm/°C
Operating temperature range: -55°C ~ 155°C
Termination count: 2
RoHS3 compliance
MSL rating: 1 (Unlimited)

All identified substitute parts meet these core electrical and mechanical requirements. Differences in secondary features (such as anti-sulfur coating or specific automotive certifications) are noted but do not prevent functional substitution when the primary parameters align.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff (ppm/°C)	Op. Temp Range (°C)	Composition	RoHS3	MSL	Inventory (Pcs)
ERJ-S03J560V	Panasonic Electronic Components	56 Ω	±5%	0.1	0603	±200	-55 ~ 155	Thick Film	Yes	1	1075
ERJ-U03J560V	Panasonic Electronic Components	56 Ω	±5%	0.1	0603	±200	-55 ~ 155	Thick Film	Yes	1	5778
ERJ-3GEYJ560V	Panasonic Electronic Components	56 Ω	±5%	0.1	0603	±200	-55 ~ 155	Thick Film	Yes	1	85064
CR0603-JW-560ELF	Bourns Inc.	56 Ω	±5%	0.1	0603	±200	-55 ~ 155	Thick Film	Yes	1	12540
CRCW060356R0JNEA	Vishay Dale	56 Ω	±5%	0.1	0603	±200	-55 ~ 155	Thick Film	Yes	1	21832
RMCF0603JT56R0	Stackpole Electronics Inc	56 Ω	±5%	0.1	0603	±200	-55 ~ 155	Thick Film	Yes	1	31248

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical compatibility with the ERJ-S03J560V. Selection among these alternatives should be based on:

Inventory Availability: RMCF0603JT56R0 (31248 units), CRCW060356R0JNEA (21832 units), and ERJ-3GEYJ560V (85064 units) offer the highest stock levels for immediate procurement.

Manufacturer Continuity: ERJ-U03J560V and ERJ-3GEYJ560V maintain Panasonic sourcing for design consistency, with ERJ-U03J560V offering 5778 units and ERJ-3GEYJ560V offering significantly higher availability at 85064 units.

Compliance Certification: All parts are ROHS3 compliant with MSL rating 1 (Unlimited). ERJ-S03J560V, ERJ-U03J560V, CRCW060356R0JNEA, and RMCF0603JT56R0 carry automotive AEC-Q200 qualification. ERJ-3GEYJ560V and CR0603-JW-560ELF do not specify AEC-Q200 in their feature sets, though both are automotive-grade components.

Physical Dimensions: Minor variations exist in height and width tolerances across manufacturers. CRCW060356R0JNEA specifies 0.033" width (0.85mm) versus the standard 0.031" (0.80mm), and height of 0.020" (0.50mm) versus 0.022" (0.55mm). These variations remain within standard PCB assembly tolerances for 0603 packages.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U03J560V directly replace ERJ-S03J560V? A: Yes. Both parts share identical electrical specifications (56 Ω ±5%, 0.1W, ±200ppm/°C, -55°C ~ 155°C), package (0603), composition (thick film), and compliance ratings (ROHS3, MSL 1). The primary difference is the series designation (ERJ-U03 versus ERJ-S03), which reflects manufacturing line variation within Panasonic's product portfolio.

Q: What is the difference between anti-sulfur and standard thick film resistors? A: Anti-sulfur coating provides additional protection against sulfur-containing environmental contaminants. The ERJ-S03J560V includes this feature, while ERJ-3GEYJ560V does not. For applications without sulfur exposure risk, both are functionally equivalent.

Q: Are all listed substitutes suitable for automotive applications? A: ERJ-S03J560V, ERJ-U03J560V, CRCW060356R0JNEA, and RMCF0603JT56R0 carry AEC-Q200 automotive qualification. ERJ-3GEYJ560V and CR0603-JW-560ELF are automotive-grade components but do not specify AEC-Q200 certification in their provided specifications. Confirm AEC-Q200 requirement with design specifications before substitution.

Q: Do physical dimension variations affect PCB assembly? A: All parts conform to 0603 (1608 Metric) package standard. Minor variations in height (0.020" to 0.022") and width (0.031" to 0.033") fall within standard PCB assembly tolerances and do not require design modification.

Q: What is MSL 1 (Unlimited) moisture sensitivity? A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. All listed parts carry this rating, eliminating moisture-related procurement constraints.

Q: Can I mix different manufacturers in the same design? A: Yes. All substitute parts meet identical electrical and mechanical specifications. Mixed sourcing is permissible from a functional standpoint, though design documentation should reflect the approved part list for traceability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message