ERJ-S03J110V Equivalent & Substitute Parts

Part Overview

The ERJ-S03J110V is a 11 Ohms ±5% 0.1W thick film chip resistor in 0603 (1608 Metric) package manufactured by Panasonic Electronic Components. This component features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently active in production with 946 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design flexibility across qualified manufacturers is needed while maintaining identical electrical and mechanical performance.

Key Parameters

Parameter	Value
Resistance	11 Ohms
Tolerance	±5%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Number of Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S03J110V is determined by strict equivalence across the following critical parameters:

Resistance value: 11 Ohms
Tolerance: ±5%
Power rating: 0.1W (1/10W)
Package: 0603 (1608 Metric)
Composition: Thick Film
Temperature coefficient: ±200ppm/°C
Operating temperature range: -55°C ~ 155°C
Termination count: 2
RoHS compliance: ROHS3 Compliant
Moisture sensitivity: MSL 1 (Unlimited)

All substitute parts listed meet these core electrical and mechanical specifications. Differences in physical dimensions (length, width, height) within the 0603 package tolerance, manufacturer-specific features (anti-sulfur vs. moisture-resistant coatings), or automotive certifications do not affect functional interchangeability in standard PCB assembly processes.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff (ppm/°C)	Op. Temp (°C)	RoHS	MSL	Inventory (Pcs)
ERJ-S03J110V	Panasonic	11 Ω	±5%	0.1	0603	±200	-55 ~ 155	ROHS3	1	946
ERJ-U03J110V	Panasonic	11 Ω	±5%	0.1	0603	±200	-55 ~ 155	ROHS3	1	5802
ERJ-3GEYJ110V	Panasonic	11 Ω	±5%	0.1	0603	±200	-55 ~ 155	ROHS3	1	28753
CR0603-JW-110ELF	Bourns Inc.	11 Ω	±5%	0.1	0603	±200	-55 ~ 155	ROHS3	1	38945
CRCW060311R0JNEA	Vishay Dale	11 Ω	±5%	0.1	0603	±200	-55 ~ 155	ROHS3	1	5559
RMCF0603JT11R0	Stackpole Electronics Inc	11 Ω	±5%	0.1	0603	±200	-55 ~ 155	ROHS3	1	5195

Engineering Selection Recommendations

All listed substitute parts are active products with ROHS3 compliance and MSL 1 rating, confirming suitability for standard manufacturing and storage conditions.

For automotive applications requiring AEC-Q200 certification, the following parts are qualified: ERJ-S03J110V, ERJ-U03J110V, ERJ-3GEYJ110V, CRCW060311R0JNEA, and RMCF0603JT11R0. The CR0603-JW-110ELF from Bourns does not carry AEC-Q200 rating but meets all other electrical and mechanical specifications.

For applications with anti-sulfur environment requirements, ERJ-S03J110V and ERJ-U03J110V are specified with anti-sulfur coating. Other parts feature moisture-resistant or standard thick film construction.

Selection should prioritize inventory availability and supply chain lead times. ERJ-3GEYJ110V offers the highest stock level (28753 units), followed by CR0603-JW-110ELF (38945 units).

Frequently Asked Questions (FAQ)

Q: Can ERJ-U03J110V directly replace ERJ-S03J110V?

A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (11 Ω ±5%, 0.1W, ±200ppm/°C, -55°C ~ 155°C), and are packaged in 0603 (1608 Metric). The primary difference is the series designation (ERJ-U03 vs. ERJ-S03). Both carry AEC-Q200 qualification and anti-sulfur coating.

Q: Is CR0603-JW-110ELF suitable for automotive applications?

A: CR0603-JW-110ELF meets all electrical and mechanical requirements for the 0603 package and operating temperature range. However, it does not carry AEC-Q200 automotive qualification. Use this part only in non-automotive applications or where AEC-Q200 is not a design requirement.

Q: What is the difference between anti-sulfur and moisture-resistant coatings?

A: Anti-sulfur coating protects against sulfur-containing atmospheric corrosion, typical in automotive and industrial environments. Moisture-resistant coating protects against humidity and moisture ingress. Both are protective measures; selection depends on the specific environmental exposure of the application.

Q: Are all substitute parts compatible with existing PCB designs?

A: Yes. All parts conform to the 0603 (1608 Metric) package standard with identical footprints and termination counts (2). Physical dimension variations (length, width, height) fall within standard 0603 package tolerances and do not affect PCB assembly or soldering processes.

Q: Which substitute part offers the best supply availability?

A: ERJ-3GEYJ110V has the highest inventory level at 28753 units, followed by CR0603-JW-110ELF at 38945 units. For immediate availability, consult current distributor stock levels.

Q: Do all parts meet RoHS and REACH compliance?

A: Yes. All listed parts are ROHS3 compliant and REACH unaffected, confirming suitability for regulated markets and applications with environmental compliance requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message