Equivalent & Substitute Parts for ERJ-S02J822X

Part Overview

The ERJ-S02J822X is an 8.2 kOhms ±5% thick film chip resistor manufactured by Panasonic Electronic Components in the 0402 (1005 Metric) package. This component is rated for 0.1W power dissipation and features anti-sulfur coating with AEC-Q200 automotive qualification. The part is currently active in production with 845 pieces available in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across alternative series designations.

Substiute Parts

ERJ-S02J822X

Panasonic Electronic ComponentsIn Stock: 954ERJ-S02J822X Datasheet

Current PartRFQ

ERJ-U02J822X

Panasonic Electronic ComponentsIn Stock: 9186ERJ-U02J822X Datasheet

DirectRFQ

ERJ-2GEJ822X

Panasonic Electronic ComponentsIn Stock: 115167ERJ-2GEJ822X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S02J822X are qualified based on the following criteria:

Electrical Parameters: Resistance value (8.2 kOhms), tolerance (±5%), power rating (0.1W), temperature coefficient (±200ppm/°C), and operating temperature range (-55°C ~ 155°C) must be identical.

Mechanical Parameters: Package designation (0402 / 1005 Metric), physical dimensions (0.039" L x 0.020" W, 1.00mm x 0.50mm), and height seated maximum (0.016" / 0.40mm) must match.

Compliance & Ratings: AEC-Q200 automotive qualification, RoHS3 compliance, and MSL 1 rating must be maintained.

Composition: Thick film construction is required.

The ERJ-U02J822X qualifies as a direct substitute, maintaining all electrical and mechanical specifications while differing only in series designation (ERJ-U02 vs. ERJ-S02). The ERJ-2GEJ822X qualifies as a similar substitute, meeting all core parameters with the exception of anti-sulfur coating feature, which is not present in this variant.

Parameter Comparison

Engineering Selection Recommendations

ERJ-U02J822X (Direct Substitute): This part maintains complete electrical and mechanical equivalence to the ERJ-S02J822X. Both components carry identical AEC-Q200 automotive qualification, RoHS3 compliance, and anti-sulfur coating. Selection between these parts is determined by availability and supply chain considerations. The ERJ-U02J822X currently has higher inventory availability (9156 pieces).

ERJ-2GEJ822X (Similar Substitute): This part meets all core electrical specifications, mechanical dimensions, and automotive compliance requirements. The primary distinction is the absence of anti-sulfur coating. Selection of this part is appropriate when anti-sulfur protection is not a circuit requirement. The ERJ-2GEJ822X offers significantly higher inventory availability (115116 pieces) and may be preferred for high-volume applications where the anti-sulfur feature is not specified.

All three parts are active products with current manufacturing status and full RoHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U02J822X be used as a direct replacement for ERJ-S02J822X?

A: Yes. The ERJ-U02J822X is electrically and mechanically equivalent to the ERJ-S02J822X. Both parts share identical resistance (8.2 kOhms), tolerance (±5%), power rating (0.1W), package (0402), temperature coefficient (±200ppm/°C), operating range (-55°C ~ 155°C), AEC-Q200 rating, and anti-sulfur coating. The series designation difference (ERJ-U02 vs. ERJ-S02) does not affect functional compatibility.

Q: What is the difference between ERJ-S02J822X and ERJ-2GEJ822X?

A: The primary difference is the anti-sulfur coating feature. The ERJ-S02J822X includes anti-sulfur protection, while the ERJ-2GEJ822X does not. All other electrical parameters, mechanical dimensions, package type, temperature coefficient, operating range, and AEC-Q200 automotive qualification are identical. Selection depends on whether anti-sulfur protection is required for the application.

Q: Are all three parts suitable for automotive applications?

A: Yes. All three parts (ERJ-S02J822X, ERJ-U02J822X, and ERJ-2GEJ822X) carry AEC-Q200 automotive qualification and are rated for the operating temperature range of -55°C ~ 155°C, meeting automotive industry standards.

Q: Can these parts be used interchangeably in the same circuit board design?

A: Yes, from a mechanical and electrical standpoint. All three parts use the 0402 (1005 Metric) package with identical physical dimensions (0.039" L x 0.020" W, height 0.016" maximum). PCB footprints and assembly processes are compatible. The selection between parts should be based on specific circuit requirements regarding anti-sulfur protection and component availability.

Q: What does MSL 1 (Unlimited) mean for these parts?

A: MSL 1 (Moisture Sensitivity Level 1) indicates that these components have unlimited shelf life and do not require special moisture control during storage or handling. No baking or desiccant storage is required prior to assembly.

Q: Are these parts RoHS compliant?

A: Yes. All three parts are ROHS3 compliant, meeting the Restriction of Hazardous Substances directive requirements.