Panasonic ERJ-S02F24R0X Equivalent & Substitute Parts

Part Overview

The Panasonic ERJ-S02F24R0X is a 24 Ohm ±1% thick film chip resistor rated at 0.1W (1/10W) in 0402 (1005 Metric) package format. This component is designed for automotive applications and meets AEC-Q200 qualification standards with anti-sulfur protection. The part is currently in active production status with 723 units available in inventory. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, supply chain considerations, or design flexibility within the same performance envelope.

Substiute Parts

ERJ-S02F24R0X

Panasonic Electronic ComponentsIn Stock: 829ERJ-S02F24R0X Datasheet

Current PartRFQ

ERJ-U02F24R0X

Panasonic Electronic ComponentsIn Stock: 9746ERJ-U02F24R0X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S02F24R0X is determined by strict equivalence across the following critical parameters:

• Resistance value: 24 Ohms
• Tolerance: ±1%
• Power rating: 0.1W (1/10W)
• Package format: 0402 (1005 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• Anti-sulfur protection: Required
• RoHS compliance: ROHS3 Compliant

The ERJ-U02F24R0X qualifies as a direct substitute because it maintains identical electrical specifications, mechanical dimensions, thermal characteristics, and automotive-grade certifications as the primary part.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S02F24R0X and ERJ-U02F24R0X are active production components manufactured by Panasonic Electronic Components. Selection between these parts is based on availability and supply chain requirements rather than performance differentiation. The ERJ-U02F24R0X offers higher inventory availability (9720 units) compared to the ERJ-S02F24R0X (723 units). Both parts maintain identical compliance certifications including ROHS3, AEC-Q200 automotive qualification, and REACH unaffected status. Either part is suitable for applications requiring 24 Ohm ±1% resistors in automotive-grade 0402 package format with anti-sulfur protection and unlimited moisture sensitivity rating.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U02F24R0X be used as a direct replacement for ERJ-S02F24R0X?

A: Yes. Both parts are electrically and mechanically equivalent with identical resistance, tolerance, power rating, package dimensions, temperature characteristics, and automotive certifications. The primary difference is the internal series designation (ERJ-U02 versus ERJ-S02) and inventory availability.

Q: Are there any thermal performance differences between these parts?

A: No. Both parts share identical temperature coefficient (±200ppm/°C) and operating temperature range (-55°C ~ 155°C), ensuring equivalent thermal stability across the specified operating envelope.

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both the ERJ-S02F24R0X and ERJ-U02F24R0X carry AEC-Q200 automotive qualification with anti-sulfur protection, making them suitable for automotive applications.

Q: Is the 0402 package dimension identical for both parts?

A: Yes. Both parts use the 0402 (1005 Metric) package format with identical physical dimensions: 0.039" L x 0.020" W (1.00mm x 0.50mm) and maximum seated height of 0.016" (0.40mm).

Q: What is the moisture sensitivity rating for these parts?

A: Both parts carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.