Equivalent & Substitute Parts for ELVT03600

Part Overview

The ELVT03600 is a 3-position terminal block plug manufactured by Amphenol PCD, featuring female sockets with 0.150" (3.81mm) pitch spacing and 270° free hanging in-line mounting. This component is classified as Active product status and is RoHS Compliant. Alternative equivalent parts may be required due to inventory availability, lead time considerations, or specific application requirements where substitute models meet identical electrical and mechanical specifications.

Substiute Parts

ELVT03600

Amphenol PCDIn Stock: 737ELVT03600 Datasheet

Current PartRFQ

EDZ1700/3

On Shore Technology Inc.In Stock: 1199EDZ1700/3 Datasheet

SimilarRFQ

EDZ1710/3

On Shore Technology Inc.In Stock: 1215EDZ1710/3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELVT03600 are qualified based on the following critical parameters that must match or exceed the main part specifications:

• Number of Positions and Pitch: Both substitute parts (EDZ1700/3 and EDZ1710/3) maintain 3 positions at 0.150" (3.81mm) pitch, ensuring mechanical and electrical compatibility with mating connectors.
• Type and Mounting: All parts are plug-type female socket connectors with free hanging in-line mounting configuration.
• Electrical Ratings: Substitute parts maintain 300 V UL voltage rating and support 16-28 AWG wire gauge range, meeting the electrical requirements of the original component.
• Termination Method: All parts utilize screw-based termination, ensuring compatible installation procedures.
• Compliance Status: Substitute parts maintain RoHS compliance (ROHS3) and MSL Level 1 rating, meeting regulatory and environmental requirements.

The EDZ1700/3 and EDZ1710/3 from On Shore Technology Inc. are functionally equivalent within the allowed parameter set, with differences limited to color (green vs. black), operating temperature range (-30°C ~ 105°C vs. 125°C maximum), and torque specifications (0.4 Nm vs. 0.25 Nm).

Parameter Comparison

Engineering Selection Recommendations

Both EDZ1700/3 and EDZ1710/3 terminal block plugs from On Shore Technology Inc. are qualified substitutes for the ELVT03600 based on matching core electrical and mechanical parameters. All three parts maintain Active product status and full RoHS compliance, ensuring regulatory acceptance in current applications.

The primary consideration for selection is operating temperature range. The ELVT03600 supports continuous operation to 125°C, while substitute parts are rated to 105°C maximum. Applications requiring sustained operation above 105°C must retain the ELVT03600. For applications operating within -30°C to 105°C, the EDZ1700/3 and EDZ1710/3 provide equivalent functionality.

Screw torque specifications differ between the main part (0.25 Nm) and substitutes (0.4 Nm). Installation procedures must be adjusted accordingly to prevent over-torquing or under-torquing of terminal connections.

Frequently Asked Questions (FAQ)

Q: Can EDZ1700/3 and EDZ1710/3 be used interchangeably with ELVT03600 in all applications?

A: Both substitute parts meet the core electrical and mechanical specifications (3 positions, 0.150" pitch, 300 V rating, 16-28 AWG wire gauge, free hanging in-line mounting). However, applications requiring continuous operation above 105°C must use the ELVT03600, which is rated to 125°C. Verify your application's maximum operating temperature before substitution.

Q: What is the difference between EDZ1700/3 and EDZ1710/3?

A: Both parts are functionally identical within the provided parameter set. They share the same electrical ratings, pitch, position count, wire gauge range, and compliance certifications. Differences are limited to manufacturer series designation (EDZ1700 vs. EDZ1710).

Q: Are there any installation differences when using substitute parts?

A: Yes. The ELVT03600 requires 0.25 Nm (2.2 Lb-In) screw torque, while EDZ1700/3 and EDZ1710/3 require 0.4 Nm (4.6 Lb-In). Installation procedures must be updated to apply the correct torque specification for the selected substitute part.

Q: Do all three parts meet current RoHS requirements?

A: Yes. The ELVT03600 is RoHS Compliant, while EDZ1700/3 and EDZ1710/3 are ROHS3 Compliant. Both compliance levels are acceptable for current applications. All parts maintain MSL Level 1 (Unlimited) moisture sensitivity rating.

Q: What is the wire strip length difference between parts?

A: The ELVT03600 specifies 6.35mm wire strip length, while EDZ1700/3 and EDZ1710/3 specify 7mm. This minor difference may affect wire preparation procedures but does not impact electrical or mechanical compatibility.

Q: Can I mix ELVT03600 with EDZ1700/3 or EDZ1710/3 in the same assembly?

A: Yes, provided your application's maximum operating temperature does not exceed 105°C. All parts share identical pitch, position count, voltage rating, and wire gauge compatibility, allowing mixed use within temperature constraints.