ELM 7-625 Equivalent & Substitute Parts

Part Overview

The ELM 7-625 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.625" (15.88mm) length specification. This component is currently in active production status with full RoHS3 compliance. The necessity to identify substitute parts arises from inventory constraints, lead time considerations, or specific application requirements where dimensional or functional alternatives may provide equivalent performance in LED mounting applications.

Substiute Parts

ELM 7-625

Bivar Inc.In Stock: 1094ELM 7-625 Datasheet

Current PartRFQ

ELM 4-600

Bivar Inc.In Stock: 1069ELM 4-600 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the ELM 7-625 is determined by compatibility in the following critical parameters:

• LED Type Compatibility: Both primary and substitute parts must support T1 LED form factors
• Material Specification: Black PVC material consistency across standoff designs
• Mounting Configuration: Vertical surface mount orientation maintained
• Compliance Standards: RoHS3 compliance and equivalent moisture sensitivity ratings

The substitute part ELM 4-600 shares the same LED type (T1), material composition (Black PVC), mounting style (vertical surface mount), and compliance certifications. The primary distinction lies in the length dimension, where ELM 4-600 specifies 0.600" (15.24mm) compared to the 0.625" (15.88mm) of the main part. This length variance of 0.025" (0.64mm) represents a parametric substitution where dimensional tolerance and application clearance become the determining factors for interchangeability.

Parameter Comparison

Engineering Selection Recommendations

Selection between ELM 7-625 and ELM 4-600 should be based on dimensional requirements and application constraints. Both parts are active, production-status components with identical RoHS3 compliance and moisture sensitivity ratings. The 0.025" (0.64mm) length difference is the sole specification variance. Component selection must account for board layout clearances, circuit height requirements, and mechanical assembly tolerances. Both parts carry equivalent environmental certifications and regulatory compliance status.

Frequently Asked Questions (FAQ)

Q: Can ELM 4-600 directly replace ELM 7-625 in all applications?

A: Substitution feasibility depends on application-specific clearance and height tolerances. The 0.025" (0.64mm) length reduction must be accommodated by the design. Both parts share identical LED type, material, and mounting configuration.

Q: Are there compliance differences between these parts?

A: No compliance differences exist. Both components are ROHS3 compliant with equivalent MSL ratings of 1 (Unlimited).

Q: What is the primary distinction between ELM 7 and ELM 4 series standoffs?

A: The series designation reflects different length specifications within the T1 LED standoff product line. ELM 7 series provides 0.625" length, while ELM 4 series provides 0.600" length. Both employ identical material composition and mounting methodology.

Q: Do packaging differences affect component compatibility?

A: Both parts are supplied in bag packaging with no functional impact on interchangeability.

Q: Which part should be selected for new designs?

A: Part selection is determined by the mechanical envelope requirements of the specific application. Both parts offer active production status and equivalent compliance certifications.