ELM 7-210 Equivalent & Substitute Parts

Part Overview

The ELM 7-210 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications requiring a 0.210" (5.33mm) height profile. This component features black PVC construction and is classified as Active product status. The part is ROHS3 compliant with MSL 1 rating, indicating unlimited moisture tolerance. Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative components that maintain functional equivalence within specified electrical and mechanical parameters.

Substiute Parts

ELM 7-210

Bivar Inc.In Stock: 976ELM 7-210 Datasheet

Current PartRFQ

ELM 2-5MM

Bivar Inc.In Stock: 2854ELM 2-5MM Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 7-210 is determined by the following critical parameters:

Primary Compatibility Criteria:

• LED Type: T1 (fixed requirement)
• Mounting Orientation: Vertical (fixed requirement)
• Material: Black PVC (fixed requirement)
• RoHS Compliance: ROHS3 Compliant (fixed requirement)
• Moisture Sensitivity Level: 1 (fixed requirement)

Allowable Variance:

• Height tolerance: ±0.010" (0.254mm) from specified dimension

The ELM 2-5MM qualifies as a parametric equivalent substitute. Both components share identical LED type, mounting orientation, material composition, and compliance certifications. The height differential of 0.010" (0.254mm) between the ELM 7-210 (0.210") and ELM 2-5MM (0.200") falls within acceptable mechanical tolerance for standoff applications where precise height matching is not a critical design constraint.

Parameter Comparison

Engineering Selection Recommendations

ELM 7-210 Selection Criteria:

• Primary choice when exact 0.210" (5.33mm) height specification is required
• Current inventory: 913 units available
• Active product status with full ROHS3 compliance

ELM 2-5MM Selection Criteria:

• Acceptable substitute when 0.010" height reduction is compatible with circuit board layout and component clearance requirements
• Enhanced inventory availability: 2755 units in stock
• Identical compliance certifications and material specifications
• Both components maintain T1 LED type and vertical mounting configuration

Selection between these parts should be based on specific PCB design requirements regarding standoff height and component spacing. Both parts satisfy identical electrical and environmental compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can ELM 2-5MM directly replace ELM 7-210 in existing designs?

A: ELM 2-5MM is a parametric equivalent with a 0.010" (0.254mm) height reduction. Direct substitution is permissible only if the circuit board layout and component clearance specifications accommodate the reduced height. Verify that the 0.200" dimension does not create interference with adjacent components or violate minimum clearance requirements.

Q: Are there electrical performance differences between these parts?

A: Both components are T1 LED standoffs with identical material composition (black PVC), mounting orientation (vertical), and compliance ratings (ROHS3, MSL 1). No electrical performance variance exists between these parts.

Q: What is the significance of the height difference?

A: The 0.010" difference represents a 4.8% reduction in standoff height. This variance is mechanical only and does not affect LED electrical characteristics. Compatibility depends entirely on PCB design tolerance and component spacing requirements.

Q: Are both parts currently in active production?

A: Yes. Both ELM 7-210 and ELM 2-5MM maintain Active product status with Bivar Inc., ensuring continued availability and support.

Q: Do packaging specifications differ between these parts?

A: Both components are supplied in Bag packaging format, consistent with standard LED standoff distribution methods.

Q: What compliance certifications apply to both parts?

A: Both ELM 7-210 and ELM 2-5MM are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, indicating no moisture-related handling restrictions during storage or assembly.