ELM 5-465 Equivalent & Substitute Parts

Part Overview

The ELM 5-465 is a T1 LED standoff manufactured by Bivar Inc., featuring a black PVC construction with a 0.465" (11.81mm) mounting height. This component is designed for vertical mounting applications requiring precise standoff dimensions in 3MM configurations. The part is currently Active in production status and fully ROHS3 compliant. Equivalent parts may be required when specific application geometry, inventory constraints, or standardized lead times necessitate alternative mechanical dimensions while maintaining functional compatibility.

Substiute Parts

ELM 5-465

Bivar Inc.In Stock: 864ELM 5-465 Datasheet

Current PartRFQ

ELM 5-485

Bivar Inc.In Stock: 10104ELM 5-485 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ELM 5-485 qualifies as a parametric equivalent within the ELM 5 series based on the following critical compatibility parameters:

Shared Parameters:

• Identical manufacturer (Bivar Inc.)
• Same series designation (ELM 5)
• Identical LED type (T1)
• Identical color (Black)
• Identical material (PVC)
• Identical RoHS compliance (ROHS3)
• Identical MSL rating (1 - Unlimited)
• Identical base product number (ELM5-4)
• Identical regulatory codes (ECCN: EAR99; HTSUS: 3926.90.9985)

Allowed Variation:

• Length/height dimension: 0.465" (11.81mm) vs. 0.485" (12.32mm) — a 0.020" (0.51mm) difference within the same mechanical family

Substitution is permissible where PCB layout or mechanical clearance allows for the dimensional variation, as the functional parameters remain identical across both parts.

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 5-465 and ELM 5-485 carry Active product status with identical ROHS3 compliance and MSL ratings, confirming their suitability for equivalent circuit applications. Selection between these parts is determined by mechanical constraint: the ELM 5-465 is specified for applications requiring a 0.465" standoff height, while the ELM 5-485 serves applications permitting a 0.485" height. The ELM 5-485 offers significantly higher stock availability (10054 units vs. 809 units), which may influence lead time considerations. Both parts satisfy identical electrical and environmental compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can ELM 5-485 replace ELM 5-465 directly? A: Replacement is permissible only where the 0.020" (0.51mm) height difference does not violate PCB spacing, component clearance, or mechanical tolerance requirements. Verify available board-level clearance before substitution.

Q: What parameters must remain identical for substitution within this family? A: Manufacturer, series designation, LED type (T1), color, material, and compliance ratings (ROHS3, MSL 1) are non-negotiable. Only the length dimension permits variation within this equivalent family.

Q: Are there electrical or functional differences between these parts? A: No. Both parts are mechanically compatible mounting standoffs for T1 LEDs with identical electrical characteristics and regulatory compliance.

Q: Why would one part be preferred over the other? A: Application geometry determines part selection. The ELM 5-465 is required where space constraints limit standoff height to 0.465". Higher inventory availability of the ELM 5-485 may reduce procurement lead times when geometry permits its use.

Q: Are both parts suitable for long-term production use? A: Both parts carry Active product status with unlimited moisture sensitivity (MSL 1), confirming long-term production viability and supply continuity for both the ELM 5-465 and ELM 5-485.