ELM 5-380 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 5-380 is a T1 LED standoff manufactured by Bivar Inc., featuring a 0.380" (9.65mm) vertical mounting height with black PVC construction. This component is used in electronic assemblies requiring vertical LED mounting with precise height specifications. The part maintains Active product status and is RoHS3 compliant. Substitute parts become necessary when specific inventory constraints exist, when alternative material properties are required, or when design requirements permit tolerance variations in mounting height.

Substiute Parts

ELM 5-380

Bivar Inc.In Stock: 959ELM 5-380 Datasheet

Current PartRFQ

ELM 2-365

Bivar Inc.In Stock: 16177ELM 2-365 Datasheet

Parametric EquivalentRFQ

ELM 5-390

Bivar Inc.In Stock: 2282ELM 5-390 Datasheet

Parametric EquivalentRFQ

H-201C

Bivar Inc.In Stock: 63137H-201C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute parts for ELM 5-380 are selected based on the following critical parameters: LED type (T1), color (black), mounting orientation (vertical), RoHS3 compliance, and MSL rating. The substitutes fall into two categories:

Category 1 - Same Series, Height Variants (ELM Series):

• ELM 5-390 and ELM 2-365 maintain the same core functionality with height variations of ±0.010" from the primary specification
• These parts share identical material (PVC), LED type (T1), color, and compliance certifications
• Height tolerance range: 0.365" to 0.390" (9.27mm to 9.91mm)

Category 2 - Material Alternative (H-201C):

• H-201C provides an identical height (0.380") but substitutes nylon material for PVC
• This part maintains the same LED type (T1), color, compliance status, and MSL rating
• Material selection becomes the differentiating factor when thermal or mechanical requirements favor nylon over PVC

All substitute parts are manufactured by Bivar Inc., maintain Active product status, and comply with ROHS3 and EAR99 regulations.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (ELM 5-380): Specified when exact 0.380" (9.65mm) height is required with PVC material properties. Product status is Active with full RoHS3 compliance and unlimited moisture sensitivity rating.

Height-Variant Substitutes (ELM 5-390, ELM 2-365): These parts are suitable when design tolerance permits mounting height variations. ELM 5-390 provides a +0.010" height increase (0.390"), while ELM 2-365 provides a -0.015" height decrease (0.365"). Both maintain PVC construction and identical compliance certifications. Height selection depends on available assembly clearance and LED lens alignment requirements within the device enclosure.

Material-Alternative Substitute (H-201C): This part maintains exact height compatibility (0.380") but employs nylon material instead of PVC. Selection is appropriate when thermal cycling, chemical exposure, or mechanical stress profiles favor nylon's material properties. All electrical and compliance characteristics remain equivalent to the primary part.

All substitute parts carry Active product status and maintain full RoHS3 compliance and MSL 1 ratings, confirming equivalent performance in standard manufacturing and storage environments.

Frequently Asked Questions (FAQ)

What parameters determine whether a part can substitute for ELM 5-380?

Substitution eligibility is based on: LED type (must be T1), mounting orientation (vertical), color (black), RoHS3 compliance, and MSL rating (1 - Unlimited). Height tolerance and material composition may vary within specified limits.

Can ELM 5-390 be directly substituted for ELM 5-380?

ELM 5-390 is a valid substitute provided the circuit board layout and device enclosure accommodate the additional 0.010" (0.25mm) mounting height. This part is functionally identical in all other parameters and maintains the same PVC material and compliance certifications.

Can ELM 2-365 be directly substituted for ELM 5-380?

ELM 2-365 is a valid substitute when design tolerance permits the 0.015" (0.38mm) reduction in mounting height. The part maintains T1 LED compatibility, PVC construction, and identical compliance certifications. Verify that the lower profile does not compromise LED lens clearance or optical performance in the target assembly.

When should H-201C be selected over ELM 5-380?

H-201C provides identical mounting height (0.380") but uses nylon material instead of PVC. Select H-201C when design requirements specify nylon for improved thermal cycling resistance, chemical compatibility, or mechanical durability. Electrical and mounting characteristics are fully equivalent.

Are all substitute parts RoHS3 compliant?

Yes. All listed substitute parts (ELM 5-390, ELM 2-365, and H-201C) carry ROHS3 Compliant certification, matching the primary ELM 5-380 specification.

What is the inventory availability impact of substitution?

ELM 5-380 inventory: 858 units. ELM 5-390 inventory: 2242 units. ELM 2-365 inventory: 16,125 units. H-201C inventory: 63,104 units. Substitute selection may be driven by lead time or bulk availability requirements when primary part inventory is constrained.

This engineering reference page is ready for direct integration into a web Markdown editor and follows all specified formatting and structural requirements.