ELM 4-295 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 4-295 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.295" (7.49mm) length. This component features a black PVC construction and accommodates 3mm LED packages with 2-lead configurations. The part maintains Active product status and is RoHS3 compliant with MSL Level 1 rating, indicating unlimited moisture sensitivity tolerance.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct replacement in circuit designs where dimensional and material tolerances permit.

Substiute Parts

ELM 4-295

Bivar Inc.In Stock: 1195ELM 4-295 Datasheet

Current PartRFQ

ELM 2-285

Bivar Inc.In Stock: 1981ELM 2-285 Datasheet

Parametric EquivalentRFQ

H-101C

Bivar Inc.In Stock: 22198H-101C Datasheet

Parametric EquivalentRFQ

H-101C-1

Bivar Inc.In Stock: 12044H-101C-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 4-295 are classified based on the following critical parameters that determine functional compatibility:

Primary Compatibility Criteria:

• LED Type: T1 (all substitutes maintain T1 specification)
• LED Size: 3MM (all substitutes accommodate 3MM packages)
• Lead Configuration: 2LD (all substitutes support 2-lead designs)
• Color: Black (all substitutes maintain black coloring)
• Mounting Orientation: Vertical (all substitutes support vertical mounting)
• Manufacturer: Bivar Inc. (all substitutes from same manufacturer)
• RoHS Status: ROHS3 Compliant (all substitutes meet compliance requirement)
• MSL Rating: Level 1 (all substitutes have unlimited moisture tolerance)

Secondary Variation Parameters:

• Material: PVC (main part) vs. Nylon (H-101C, H-101C-1 substitutes)
• Length: 0.295" (main part) vs. 0.285" (substitute parts)
• Series Designation: ELM 4 (main part) vs. ELM 2 or H101C (substitutes)

Substitution is permissible when the application tolerates the specified length and material variations while maintaining all primary compatibility criteria.

Parameter Comparison

Engineering Selection Recommendations

ELM 2-285 Selection Criteria: The ELM 2-285 maintains identical material composition (PVC) and all primary compatibility parameters with the ELM 4-295. The length differential of 0.010" (0.25mm) represents a minor dimensional variation. Selection of ELM 2-285 is appropriate when PVC material properties are required and the reduced standoff height accommodates circuit board layout constraints.

H-101C and H-101C-1 Selection Criteria: Both H-101C and H-101C-1 substitute parts employ Nylon material instead of PVC, with identical length specifications of 0.285" (7.24mm). These parts are suitable for applications where Nylon's mechanical properties provide superior performance characteristics. H-101C and H-101C-1 are functionally equivalent variants within the H101C series. Selection between these two parts depends on inventory availability and procurement requirements, as both maintain identical electrical and mechanical specifications.

All substitute parts maintain Active product status, ROHS3 compliance, and MSL Level 1 rating, confirming suitability for direct replacement in applications where the specified parameter variations are acceptable.

Frequently Asked Questions (FAQ)

Q: Can ELM 2-285 directly replace ELM 4-295 in all applications?

A: ELM 2-285 is compatible with ELM 4-295 when the 0.010" (0.25mm) length reduction does not affect circuit board clearance or LED positioning requirements. Both parts share identical PVC material, T1 LED type, 3MM size, 2-lead configuration, and compliance certifications.

Q: What is the primary difference between H-101C and H-101C-1?

A: H-101C and H-101C-1 are functionally equivalent parts within the H101C series. Both feature Nylon construction, 0.285" length, and identical electrical specifications. Selection between these parts is based on inventory availability and procurement logistics rather than technical performance differences.

Q: When should Nylon substitutes (H-101C, H-101C-1) be selected over PVC options?

A: Nylon substitutes are selected when the application requires enhanced mechanical strength, superior chemical resistance, or specific thermal characteristics that Nylon provides compared to PVC. The 0.010" (0.25mm) length reduction must be verified as compatible with circuit board design.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. ELM 2-285, H-101C, and H-101C-1 all maintain ROHS3 compliance and MSL Level 1 rating, matching the environmental and regulatory specifications of the ELM 4-295.

Q: What packaging format is used for these parts?

A: All parts in this equivalency group are supplied in Bag packaging format, suitable for standard component handling and storage procedures.

Q: Can H-101C and H-101C-1 be used interchangeably?

A: Yes. H-101C and H-101C-1 are interchangeable components with identical specifications. Selection depends on inventory status and procurement availability.