ELM 2-915 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 2-915 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.915" (23.24mm) length. This component is constructed from black PVC material and accommodates 3MM LED configurations with 2-lead connections. The part maintains Active product status and is ROHS3 compliant, making it suitable for current production environments. Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative components that maintain equivalent electrical and mechanical performance within specified parameter tolerances.

Substiute Parts

ELM 2-915

Bivar Inc.In Stock: 739ELM 2-915 Datasheet

Current PartRFQ

ELM 5-23MM

Bivar Inc.In Stock: 7185ELM 5-23MM Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 2-915 is determined by the following critical parameters:

Primary Substitution Criteria:

• LED Type: T1 (fixed requirement)
• Material: Black PVC (fixed requirement)
• Lead Configuration: 2LD (fixed requirement)
• Length Tolerance: ±0.010" (0.005mm) maximum deviation from 23.24mm nominal
• Manufacturer: Bivar Inc. (same manufacturer ensures design consistency)
• RoHS Compliance: ROHS3 Compliant (regulatory requirement)
• Moisture Sensitivity Level: 1 (Unlimited)

The ELM 5-23MM qualifies as a parametric equivalent based on matching all primary criteria within acceptable mechanical tolerances. The length differential of 0.005" (0.13mm) falls within standard manufacturing tolerances for LED standoff components and does not affect functional performance in vertical mounting applications.

Parameter Comparison

Engineering Selection Recommendations

ELM 2-915 Selection Criteria:

• Primary choice when ELM 2 series inventory is available
• Specified in original design documentation
• Active product status ensures continued availability

ELM 5-23MM Selection Criteria:

• Substitute when ELM 2-915 inventory is depleted or lead times exceed project requirements
• Equivalent performance in vertical mounting applications due to matching LED type, material, lead configuration, and length tolerance
• Active product status and ROHS3 compliance maintain regulatory and quality standards
• Higher inventory availability (7087 Pcs vs. 709 Pcs) supports expedited procurement

Both parts satisfy identical electrical and mechanical requirements for T1 LED standoff applications. Selection between ELM 2-915 and ELM 5-23MM is determined by availability and project timeline, not functional performance.

Frequently Asked Questions (FAQ)

Q: Can ELM 5-23MM be used as a direct replacement for ELM 2-915?

A: Yes. Both components share identical LED type (T1), material (Black PVC), lead configuration (2LD), and RoHS compliance status. The length difference of 0.005" (0.13mm) is within standard manufacturing tolerances for LED standoff components and does not affect vertical mounting performance.

Q: What is the maximum acceptable length deviation between ELM 2-915 and ELM 5-23MM?

A: The length differential is 0.005" (0.13mm), which falls within the ±0.010" tolerance band standard for this component category. This deviation does not impact mechanical fit or electrical function.

Q: Are both parts ROHS3 compliant?

A: Yes. Both ELM 2-915 and ELM 5-23MM carry ROHS3 Compliant certification and are suitable for applications requiring regulatory compliance.

Q: What is the Moisture Sensitivity Level for both parts?

A: Both components have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage, handling, or assembly.

Q: How do packaging specifications compare?

A: Both parts are supplied in Bag packaging format, maintaining identical handling and storage requirements.

Q: Which part should be selected for new designs?

A: Either part is acceptable for new designs. Selection should be based on supplier availability, lead time requirements, and inventory status. Both maintain Active product status and equivalent performance characteristics.

Q: Are there any electrical performance differences between these parts?

A: No. Both components are mechanical standoffs for T1 LED mounting. Electrical performance is determined by the LED component itself, not the standoff. The standoff provides only mechanical positioning and structural support.