ELM 2-235 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 2-235 is a T1 LED standoff manufactured by Bivar Inc., featuring a black PVC construction with a 0.235" (5.97mm) length. This component is classified as an active product and serves as a mechanical mounting solution for T1 LED assemblies in vertical orientation. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where dimensional and material compatibility are maintained.

Substiute Parts

ELM 2-235

Bivar Inc.In Stock: 961ELM 2-235 Datasheet

Current PartRFQ

ELM 4-6MM

Bivar Inc.In Stock: 1817ELM 4-6MM Datasheet

Parametric EquivalentRFQ

ELM 5-235

Bivar Inc.In Stock: 20480ELM 5-235 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 2-235 are identified based on the following critical parameters:

Primary Substitution Criteria:

• LED Type: T1 (mechanical compatibility with T1 LED packages)
• Material: PVC (consistent material composition)
• Color: Black (visual and application consistency)
• Manufacturer: Bivar Inc. (same manufacturer ecosystem)
• RoHS Status: ROHS3 Compliant (regulatory alignment)
• Moisture Sensitivity Level: 1 (Unlimited) (environmental tolerance equivalence)

Secondary Consideration:

• Length tolerance: Parts with length specifications within the ELM series maintain functional interchangeability in applications where vertical standoff height is not a critical constraint

The ELM 5-235 maintains identical length (0.235" / 5.97mm) and all primary parameters, establishing direct parametric equivalence. The ELM 4-6MM shares all primary parameters with a length variation of 0.240" (6.10mm), representing a near-equivalent alternative where minimal height differential is acceptable.

Parameter Comparison

Engineering Selection Recommendations

ELM 5-235 Selection Criteria: The ELM 5-235 is the primary substitute for the ELM 2-235, offering identical dimensional specifications (0.235" / 5.97mm length) and all equivalent electrical and mechanical parameters. Both parts maintain ROHS3 compliance, MSL 1 rating, and T1 LED compatibility. Selection of ELM 5-235 is appropriate when direct dimensional replacement is required without any height tolerance consideration. Inventory availability of 20,398 units supports production continuity.

ELM 4-6MM Selection Criteria: The ELM 4-6MM functions as a secondary substitute where a 0.005" (0.13mm) length increase is acceptable within application design tolerances. This part maintains all primary parameter equivalence (T1 LED type, PVC material, black color, ROHS3 compliance, MSL 1 rating) and represents an alternative when ELM 5-235 availability is constrained. The ELM 4-6MM inventory of 1,737 units provides secondary sourcing capability.

Product Status Consideration: All three parts maintain Active product status, confirming ongoing manufacturer support and supply chain viability for both primary and substitute selections.

Frequently Asked Questions (FAQ)

Q: Can ELM 5-235 be used as a direct replacement for ELM 2-235?

A: Yes. The ELM 5-235 maintains identical length (0.235" / 5.97mm), LED type (T1), material (PVC), color (black), and all compliance certifications (ROHS3, MSL 1). No design modification is required for direct substitution.

Q: What is the dimensional difference between ELM 2-235 and ELM 4-6MM?

A: The ELM 4-6MM has a length of 0.240" (6.10mm) compared to the ELM 2-235 length of 0.235" (5.97mm), representing a 0.005" (0.13mm) increase. This difference must be evaluated against application-specific height constraints.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. Both ELM 5-235 and ELM 4-6MM are ROHS3 compliant, matching the compliance status of the ELM 2-235.

Q: What does Moisture Sensitivity Level 1 (Unlimited) indicate?

A: MSL 1 (Unlimited) indicates that the component has no moisture sensitivity restrictions and requires no special handling, storage, or reflow time limitations during assembly and manufacturing processes.

Q: Are these parts suitable for vertical LED mounting applications?

A: Yes. All three parts (ELM 2-235, ELM 5-235, and ELM 4-6MM) are designed for vertical LED standoff mounting with T1 LED packages and maintain consistent mechanical compatibility across the ELM series.

Q: Which substitute part should be selected for maximum inventory availability?

A: The ELM 5-235 offers the highest inventory level at 20,398 units, providing optimal supply chain continuity and lead time assurance.