ELM 1-450 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 1-450 is a T1 3/4 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications. This component features a black PVC construction with a 0.450" (11.43mm) length and is classified as an active product with ROHS3 compliance. Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct replacement in applications where dimensional and material tolerances permit.

Substiute Parts

ELM 1-450

Bivar Inc.In Stock: 772ELM 1-450 Datasheet

Current PartRFQ

LTM-450

Bivar Inc.In Stock: 1736LTM-450 Datasheet

DirectRFQ

ELM 1-11MM

Bivar Inc.In Stock: 1511ELM 1-11MM Datasheet

Parametric EquivalentRFQ

ELM 3-440

Bivar Inc.In Stock: 22653ELM 3-440 Datasheet

Parametric EquivalentRFQ

ELM 3-450

Bivar Inc.In Stock: 9053ELM 3-450 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 1-450 are classified based on alignment with the following critical parameters: LED type (T1 3/4), color (black), length tolerance (0.450" ± acceptable variance), material composition, and regulatory compliance (ROHS3). Parts are grouped into two categories:

Direct Substitutes (Identical Length): Parts matching the exact 0.450" (11.43mm) length specification with compatible LED type and material properties.

Parametric Equivalents (Length Variance): Parts with T1 3/4 LED compatibility and black color but with length specifications within acceptable tolerance ranges (0.430" to 0.450"), suitable for applications with dimensional flexibility.

Parameter Comparison

Engineering Selection Recommendations

ELM 3-450: Direct substitute with identical length (0.450"), LED type (T1 3/4), color (black), and PVC material. Both parts maintain ROHS3 compliance and MSL 1 rating. Suitable for direct replacement in applications requiring exact dimensional matching.

LTM-450: Direct substitute with identical length (0.450") and LED compatibility (T1, T1 3/4). Material differs (Crystalline Polymer vs. PVC) but maintains equivalent regulatory compliance (ROHS3, MSL 1). Packaging format is bulk rather than bag. Suitable for applications where material substitution is acceptable.

ELM 3-440: Parametric equivalent with 0.010" (0.25mm) length reduction from the main part specification. Maintains T1 3/4 LED type, black color, PVC material, and ROHS3 compliance. Suitable for applications with dimensional tolerance for minor length variance.

ELM 1-11MM: Parametric equivalent with 0.020" (0.51mm) length reduction from the main part specification. Maintains T1 3/4 LED type, black color, PVC material, and ROHS3 compliance. Suitable for applications with dimensional tolerance for minor length variance.

All substitute parts are active products from Bivar Inc. with identical regulatory compliance profiles.

Frequently Asked Questions (FAQ)

Q: Can ELM 3-450 replace ELM 1-450 in all applications?

A: ELM 3-450 is a direct substitute with identical length (0.450"), LED type (T1 3/4), color (black), and PVC material composition. Both parts maintain ROHS3 compliance and MSL 1 rating. Substitution is valid where these parameters define compatibility requirements.

Q: What is the difference between LTM-450 and ELM 1-450?

A: Both parts share identical length (0.450") and LED type compatibility (T1 3/4). The primary difference is material composition: LTM-450 uses Crystalline Polymer while ELM 1-450 uses PVC. Both maintain ROHS3 compliance and MSL 1 rating. LTM-450 is supplied in bulk packaging versus bag packaging for ELM 1-450.

Q: Are ELM 1-11MM and ELM 3-440 suitable replacements for ELM 1-450?

A: ELM 1-11MM and ELM 3-440 are parametric equivalents with length specifications of 0.430" and 0.440" respectively, compared to the 0.450" specification of ELM 1-450. Both maintain T1 3/4 LED type, black color, PVC material, and ROHS3 compliance. These parts are suitable for applications where minor length variance (0.010" to 0.020") is acceptable within design tolerances.

Q: Do all substitute parts meet the same regulatory requirements?

A: All substitute parts listed (ELM 3-450, LTM-450, ELM 1-11MM, ELM 3-440) are ROHS3 compliant with MSL 1 (Unlimited) rating, matching the regulatory profile of ELM 1-450.

Q: What packaging formats are available for these parts?

A: ELM 1-450, ELM 3-450, ELM 1-11MM, and ELM 3-440 are supplied in bag packaging. LTM-450 is supplied in bulk packaging format.

Q: Which substitute offers the closest dimensional match to ELM 1-450?

A: ELM 3-450 and LTM-450 both match the exact 0.450" (11.43mm) length specification of ELM 1-450. ELM 3-450 maintains identical PVC material, while LTM-450 uses Crystalline Polymer material.