ELM 1-395 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 1-395 is a T1 3/4 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications. This component features a black PVC construction with a 0.395" (10.03mm) length specification. The part maintains Active product status and is RoHS3 compliant, making it suitable for current production environments. Substitute parts are identified based on matching electrical and mechanical parameters within the ELM 1 series, specifically maintaining identical LED form factor (T1 3/4), material composition (black PVC), and functional characteristics while accommodating minor length variations within acceptable tolerance ranges.

Substiute Parts

ELM 1-395

Bivar Inc.In Stock: 798ELM 1-395 Datasheet

Current PartRFQ

ELM 1-10MM

Bivar Inc.In Stock: 1046ELM 1-10MM Datasheet

Parametric EquivalentRFQ

ELM 1-385

Bivar Inc.In Stock: 859ELM 1-385 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 1-395 are qualified based on the following criteria:

Primary Matching Parameters:

• LED form factor: T1 3/4 (mandatory)
• Material: Black PVC (mandatory)
• Series: ELM 1 (mandatory)
• Color: Black (mandatory)
• RoHS Status: ROHS3 Compliant (mandatory)
• Moisture Sensitivity Level: 1 (Unlimited) (mandatory)

Variable Parameter:

• Length: Acceptable range 0.385" to 0.395" (9.78mm to 10.03mm)

The ELM 1-395 identifies two parametric equivalents within the ELM 1 series. Both substitute parts maintain identical electrical and mechanical specifications except for minor length variations. These length differences fall within the mechanical tolerance envelope for vertical LED standoff applications, allowing direct substitution without circuit redesign or mechanical rework.

Parameter Comparison

Engineering Selection Recommendations

ELM 1-10MM (0.390" / 9.91mm): This substitute provides a 0.005" (0.12mm) reduction in length from the primary specification. The part maintains Active product status and full RoHS3 compliance. Selection is appropriate when component availability requires substitution and the reduced standoff height is mechanically acceptable within the application's tolerance stack.

ELM 1-385 (0.385" / 9.78mm): This substitute provides a 0.010" (0.25mm) reduction in length from the primary specification. The part maintains Active product status and full RoHS3 compliance. Selection is appropriate when component availability requires substitution and the reduced standoff height is mechanically acceptable within the application's tolerance stack.

Both substitutes are qualified for direct replacement based on matching electrical characteristics, identical material composition, and compliance certifications. Selection between ELM 1-395, ELM 1-10MM, and ELM 1-385 is determined by mechanical clearance requirements and available inventory.

Frequently Asked Questions (FAQ)

Q: Can ELM 1-10MM and ELM 1-385 be used interchangeably with ELM 1-395?

A: Yes. All three parts share identical electrical specifications, material composition (black PVC), LED form factor (T1 3/4), and compliance certifications (RoHS3, MSL 1). The only difference is standoff length. Substitution is valid when the reduced height does not violate mechanical clearance or assembly requirements.

Q: What is the maximum length variation between these substitute parts?

A: The maximum variation is 0.010" (0.25mm), occurring between ELM 1-395 (0.395" / 10.03mm) and ELM 1-385 (0.385" / 9.78mm). This variation is typical for mechanical standoff applications and falls within standard tolerance ranges for vertical LED mounting.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. ELM 1-395, ELM 1-10MM, and ELM 1-385 are all RoHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), meeting current environmental and regulatory requirements.

Q: What packaging format is used for these parts?

A: All parts are supplied in Bag packaging format, consistent across the ELM 1 series.

Q: How do I determine which substitute is appropriate for my application?

A: Selection is based on mechanical clearance requirements. Measure the available vertical space for the LED standoff. If the application accommodates 0.390" (9.91mm) or 0.385" (9.78mm) height, the corresponding substitute part is acceptable. If the full 0.395" (10.03mm) height is required, use the primary part number ELM 1-395.