ELFH10180 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The ELFH10180 is a 10-position vertical terminal block header manufactured by Amphenol PCD. This component features male pins with 4-side shrouding, a 5.00mm pitch, and solder termination for through-hole mounting. The part is actively produced and widely used in industrial control, automation, and power distribution applications where reliable electrical connections are required.

Equivalent and substitute parts are necessary when the primary part is unavailable, when alternative sourcing reduces lead times, or when design flexibility permits selection from multiple qualified manufacturers meeting the same electrical and mechanical specifications.

Key Parameters

Parameter	Value
Number of Positions	10
Pitch	0.197" (5.00mm) or 0.200" (5.08mm)
Header Orientation	Vertical
Termination Style	Solder
Mounting Type	Through Hole
Current Rating (UL)	12 A to 15 A
Voltage Rating (UL)	300 V to 600 V
Operating Temperature	-40°C to 105°C (or higher)
Material Flammability	UL94 V-0
RoHS Status	RoHS Compliant or ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the ELFH10180 is determined by the following critical parameters:

Position Count: All substitutes maintain 10 positions
Pitch Tolerance: The ELFH10180 operates at 5.00mm pitch. Substitutes at 5.08mm pitch (0.200") are mechanically compatible within standard PCB design tolerances for this connector class
Shrouding Configuration: The ELFH10180 features 4-side shrouding. Substitutes with 2-side shrouding (0395215010, 1753592, 1758092) provide reduced EMI shielding but maintain electrical continuity
Electrical Ratings: All substitutes meet or exceed the UL current rating of 15 A and voltage rating of 300 V
Termination and Mounting: All substitutes use solder termination and through-hole mounting
Compliance: All substitutes are RoHS compliant and carry MSL 1 rating

Substitutes are grouped into two categories: direct equivalents (matching 5.00mm pitch and 4-side shrouding) and compatible alternatives (5.08mm pitch or reduced shrouding).

Parameter Comparison

Manufacturer Part Number	Manufacturer	Positions	Pitch	Shrouding	Current (UL)	Voltage (UL)	Operating Temp	Color	RoHS Status
ELFH10180	Amphenol PCD	10	5.00mm	4-Side	15 A	300 V	-40°C to 105°C	Black	RoHS Compliant
0395311010	Molex	10	5.08mm	4-Side	15 A	300 V	-40°C to 105°C	Black	ROHS3 Compliant
0395316010	Molex	10	5.08mm	4-Side	15 A	300 V	-40°C to 105°C	Green	Not Specified
0395215010	Molex	10	5.00mm	2-Side	15 A	300 V	-40°C to 105°C	Green	ROHS3 Compliant
14121017001000	HARTING	10	5.08mm	4-Side	15 A	600 V	-40°C to 110°C	Black	ROHS3 Compliant
1753592	Phoenix Contact	10	5.00mm	2-Side	12 A	300 V	Not Specified	Green	ROHS3 Compliant
1755503	Phoenix Contact	10	5.00mm	4-Side	12 A	300 V	Not Specified	Green	ROHS3 Compliant
1755817	Phoenix Contact	10	5.08mm	4-Side	12 A	300 V	Not Specified	Green	ROHS3 Compliant
1758092	Phoenix Contact	10	5.08mm	2-Side	12 A	300 V	Not Specified	Green	ROHS3 Compliant

Engineering Selection Recommendations

Direct Equivalents (Highest Compatibility)

The Molex 0395311010 and HARTING 14121017001000 are the closest functional equivalents to the ELFH10180. Both maintain 4-side shrouding, vertical orientation, and solder termination. The 0395311010 operates at 5.08mm pitch with identical electrical ratings. The HARTING part offers enhanced voltage rating (600 V) and extended operating temperature range (-40°C to 110°C), providing additional design margin in high-voltage applications.

Compatible Alternatives (Pitch-Matched)

The Phoenix Contact 1755503 matches the ELFH10180 at 5.00mm pitch with 4-side shrouding. This part carries ROHS3 compliance and maintains the same vertical through-hole configuration. The current rating is 12 A, which is lower than the ELFH10180's 15 A rating and must be evaluated against circuit requirements.

Reduced Shrouding Options

The Molex 0395215010 and Phoenix Contact 1753592 and 1758092 provide 2-side shrouding instead of 4-side. These parts are suitable for applications where EMI shielding requirements are less stringent. The 0395215010 maintains 5.00mm pitch and 15 A current rating. Phoenix Contact parts operate at 12 A and require current capacity verification.

Compliance Verification

All substitute parts carry RoHS compliance (either RoHS or ROHS3 status) and MSL 1 rating, meeting standard industrial procurement requirements. The HARTING part includes REACH Unaffected status, providing additional regulatory assurance for European applications.

Frequently Asked Questions (FAQ)

Q: Can I use a 5.08mm pitch substitute in place of the 5.00mm ELFH10180?

A: Yes. The 5.08mm pitch (0.200") and 5.00mm pitch (0.197") are mechanically compatible within standard PCB design tolerances for terminal block headers. PCB footprints designed for 5.00mm pitch accommodate 5.08mm pitch connectors without functional degradation. Verify footprint clearances during design review.

Q: What is the difference between 2-side and 4-side shrouding?

A: 4-side shrouding provides complete perimeter protection and enhanced EMI shielding. 2-side shrouding covers only two opposing sides, reducing material and cost while maintaining electrical continuity. Select 4-side shrouding for noise-sensitive applications; 2-side shrouding is acceptable for general industrial use.

Q: Are Phoenix Contact parts with 12 A rating suitable replacements for the 15 A ELFH10180?

A: Phoenix Contact substitutes (1753592, 1755503, 1755817, 1758092) are rated at 12 A. These parts are suitable only if circuit current requirements do not exceed 12 A. Verify actual circuit current draw before substitution. If circuit requires 15 A capacity, select Molex or HARTING alternatives.

Q: What does RoHS compliance mean for terminal block selection?

A: RoHS compliance indicates the part contains no restricted hazardous substances (lead, cadmium, mercury, etc.) as defined by EU Directive 2011/65/EU. All listed substitutes meet RoHS requirements, ensuring compliance with modern procurement standards and environmental regulations.

Q: Can I mix ELFH10180 and substitute parts in the same assembly?

A: Yes. All listed substitutes are mechanically and electrically compatible with the ELFH10180 within the specified parameters. Mixed use is acceptable provided each part's current and voltage ratings are not exceeded in their respective circuits.

Q: Does the HARTING 14121017001000 offer advantages over the ELFH10180?

A: The HARTING part provides higher voltage rating (600 V vs. 300 V) and extended operating temperature range (-40°C to 110°C vs. -40°C to 105°C). These enhanced specifications provide additional design margin in demanding applications. Pitch is 5.08mm, requiring PCB footprint verification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message