ELFH0711G Equivalent & Substitute Parts

Part Overview

The ELFH0711G is a 5MM right-angle header terminal block manufactured by Amphenol PCD, classified as a closed-end position terminal block. This component is actively produced and maintained in inventory (1101 pcs available). Terminal block headers of this type are essential interconnection components in industrial control systems, power distribution modules, and modular electronic assemblies where reliable wire-to-board connections are required. Substitute parts are identified when equivalent electrical and mechanical specifications align with the original design parameters, ensuring functional compatibility in replacement scenarios.

Substiute Parts

ELFH0711G

Amphenol PCDIn Stock: 1156ELFH0711G Datasheet

Current PartRFQ

796644-7

TE Connectivity AMP ConnectorsIn Stock: 1101796644-7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute part identification for the ELFH0711G is based on alignment of the following critical parameters:

• Pitch specification: 5MM (0.197") center-to-center spacing
• Header orientation: Right-angle (90°) configuration
• Termination method: Solder connection to PCB
• Mounting type: Through-hole installation
• Regulatory compliance: RoHS Compliant status
• Moisture sensitivity: MSL 1 (Unlimited) classification
• Export classification: EAR99 designation

The substitute part 796644-7 (TE Connectivity AMP Connectors) meets these core substitution criteria. Both components share identical pitch spacing, right-angle orientation, through-hole mounting architecture, and equivalent regulatory compliance profiles. This alignment permits direct functional substitution in applications where the ELFH0711G is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the ELFH0711G and 796644-7 maintain active product status with current manufacturing support. Both components carry RoHS Compliant certification and MSL 1 classification, indicating equivalent environmental and regulatory standing. The 796644-7 provides additional documented specifications including operating temperature range (-40°C to 110°C), current rating (15A UL), voltage rating (300V UL), and material composition (Polyamide PA66 housing with Copper Alloy contacts). Selection between these parts should be based on availability, lead time, and specific application requirements where documented electrical ratings are necessary for design validation.

Frequently Asked Questions (FAQ)

Q: What makes 796644-7 a valid substitute for ELFH0711G?

A: Both components share identical 5MM pitch spacing, right-angle header orientation, through-hole solder termination, and equivalent regulatory compliance (RoHS, MSL 1, EAR99). These parameters define functional interchangeability for terminal block applications.

Q: Are there differences in physical dimensions between these parts?

A: The ELFH0711G specifications provided do not include detailed dimensional data. The 796644-7 specifies contact tail length (0.138" / 4.60mm) and insulation height (0.329" / 8.36mm). Physical verification against application PCB layout is necessary when dimensional constraints exist.

Q: Can these parts be used interchangeably in existing designs?

A: Substitution is valid when the application requires 5MM pitch, right-angle orientation, and through-hole solder mounting. The 796644-7 provides documented electrical ratings (15A UL, 300V UL) suitable for design verification. Mechanical fit must be confirmed against PCB footprint specifications.

Q: What is the difference in position count between these parts?

A: The 796644-7 is specified as a 7-position terminal block header. The ELFH0711G position count is not provided in the available data. Position compatibility must be confirmed for the specific application requirement.

Q: Are both parts available in equivalent packaging formats?

A: Both components are supplied in Bulk packaging. Current inventory shows 1101 pcs for ELFH0711G and 1031 pcs for 796644-7, indicating equivalent availability status.