EL5292CS-T13 Equivalent & Substitute Parts

Part Overview

The EL5292CS-T13 is a current feedback amplifier integrated circuit manufactured by Renesas Electronics Corporation, configured as a dual-channel operational amplifier in an 8-SOIC surface mount package. This device is classified as obsolete, indicating discontinued production and limited availability through standard distribution channels. The identification of equivalent and substitute parts is necessary to maintain design continuity, ensure project feasibility, and provide alternative sourcing options for applications requiring current feedback amplifier functionality with comparable electrical and mechanical specifications.

Substiute Parts

EL5292CS-T13

Renesas Electronics CorporationIn Stock: 979EL5292CS-T13 Datasheet

Current PartRFQ

LT1396CS8#PBF

Analog Devices Inc.In Stock: 1784LT1396CS8#PBF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the EL5292CS-T13 is determined by the following critical parameters that define functional equivalence:

Primary Substitution Criteria:

• Amplifier topology: Current feedback architecture
• Circuit count: Dual-channel configuration (2 circuits)
• Package type: 8-SOIC surface mount form factor with 0.154" (3.90mm) width
• Voltage supply compatibility: Operating range overlap within specified minimum and maximum supply voltages
• Output current capability: Sufficient current per channel to support application requirements
• Input bias current and offset voltage: Within acceptable ranges for signal integrity

Secondary Compatibility Factors:

• Slew rate and bandwidth performance characteristics
• Supply current consumption per channel
• Operating temperature range coverage
• RoHS and REACH compliance status for regulatory requirements

The LT1396CS8#PBF from Analog Devices Inc. qualifies as a substitute based on matching amplifier type, circuit count, and package configuration. Electrical parameter variations exist and must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The EL5292CS-T13 carries an obsolete designation, indicating end-of-life status and unavailability through standard manufacturing channels. The LT1396CS8#PBF maintains active product status with current manufacturing support and established distribution networks.

Compliance and Regulatory Status: The EL5292CS-T13 is RoHS non-compliant, whereas the LT1396CS8#PBF achieves ROHS3 compliance. Both devices are REACH unaffected and carry identical ECCN and HTSUS classifications. Applications subject to RoHS regulatory requirements must employ the LT1396CS8#PBF.

Electrical Performance Trade-offs: The EL5292CS-T13 delivers superior slew rate (2300 V/µs versus 800 V/µs) and bandwidth (600 MHz versus 400 MHz). The LT1396CS8#PBF exhibits lower supply current consumption (4.6 mA versus 6 mA per channel) and reduced output current per channel (80 mA versus 120 mA). Applications requiring maximum speed and bandwidth performance may necessitate design optimization when transitioning to the LT1396CS8#PBF.

Temperature Range Coverage: The EL5292CS-T13 operates across -40°C to 85°C, while the LT1396CS8#PBF operates across 0°C to 70°C. Applications requiring extended low-temperature operation below 0°C cannot employ the LT1396CS8#PBF without design modification.

Supply Voltage Compatibility: The LT1396CS8#PBF accepts lower minimum supply voltage (4 V versus 5 V) and higher maximum supply voltage (12 V versus 10 V), providing broader supply range flexibility.

Frequently Asked Questions (FAQ)

Q: Can the LT1396CS8#PBF directly replace the EL5292CS-T13 in existing PCB designs?

A: Direct pin-compatible replacement is possible due to identical 8-SOIC package configuration and pinout. However, electrical parameter differences require circuit validation. The reduced slew rate, bandwidth, and output current of the LT1396CS8#PBF may impact performance in high-speed or high-current applications. Temperature range differences must be evaluated for low-temperature operation requirements.

Q: What are the primary electrical differences between these devices?

A: The EL5292CS-T13 provides 2300 V/µs slew rate and 600 MHz bandwidth compared to 800 V/µs and 400 MHz for the LT1396CS8#PBF. Output current per channel is 120 mA versus 80 mA. Input bias current is 4 µA versus 10 µA. Supply current consumption is 6 mA versus 4.6 mA per channel. Input offset voltage is identical at 1 mV for both devices.

Q: Are there packaging differences between the EL5292CS-T13 and LT1396CS8#PBF?

A: Both devices employ 8-SOIC surface mount packages with identical 0.154" (3.90mm) width specifications. The EL5292CS-T13 is supplied in standard packaging, while the LT1396CS8#PBF is supplied in tube packaging. PCB footprint compatibility is confirmed.

Q: What is the operating temperature range difference, and does it matter?

A: The EL5292CS-T13 operates from -40°C to 85°C, while the LT1396CS8#PBF operates from 0°C to 70°C. Applications requiring operation below 0°C cannot use the LT1396CS8#PBF without design modification or alternative component selection.

Q: Does the LT1396CS8#PBF meet RoHS requirements?

A: Yes, the LT1396CS8#PBF is ROHS3 compliant. The EL5292CS-T13 is RoHS non-compliant. Applications subject to RoHS regulatory requirements must employ the LT1396CS8#PBF.

Q: What supply voltage ranges are supported by each device?

A: The EL5292CS-T13 requires 5 V to 10 V supply voltage. The LT1396CS8#PBF accepts 4 V to 12 V supply voltage. The LT1396CS8#PBF provides broader supply range compatibility, particularly for lower voltage applications.

Q: Which device should be selected for new designs?

A: The LT1396CS8#PBF is the appropriate selection for new designs due to active product status, RoHS3 compliance, and established manufacturing support. The EL5292CS-T13 is obsolete and should not be specified for new development.