EGA.1B.302.CLL Equivalent & Substitute Parts

Part Overview

The EGA.1B.302.CLL is a 2-position circular connector receptacle manufactured by LEMO, featuring female sockets with solder cup termination. This component is classified as a panel-mount, shielded connector with push-pull fastening and operates across an extended temperature range of -55°C to 250°C. The part maintains active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, application-specific requirements, or supply chain considerations.

Substiute Parts

EGA.1B.302.CLL

LEMOIn Stock: 866EGA.1B.302.CLL Datasheet

Current PartRFQ

G11LAC-P02LPH0-0000

ODUIn Stock: 1087G11LAC-P02LPH0-0000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EGA.1B.302.CLL is determined by strict alignment of the following critical parameters:

• Connector type: Receptacle with female sockets
• Number of positions: 2
• Termination method: Solder cup
• Fastening mechanism: Push-pull
• Mounting configuration: Panel mount with bulkhead rear-side nut
• Shielding: Shielded design
• Insert material: PEEK
• Contact finish: Gold plating on mating surfaces
• Ingress protection: IP50 minimum
• Compliance: ROHS3 and REACH unaffected status

The substitute part G11LAC-P02LPH0-0000 (ODU MINI-SNAP® L series) satisfies these core substitution criteria. Variations in current rating, operating temperature range, shell finish specification, and contact material do not preclude substitution when application requirements fall within the substitute's rated parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the EGA.1B.302.CLL and G11LAC-P02LPH0-0000 maintain active product status and satisfy ROHS3 compliance and REACH unaffected requirements. Selection between these parts is determined by application-specific operating conditions:

The EGA.1B.302.CLL is suitable for applications requiring extended temperature operation from -55°C to 250°C and current loads up to 15A. The G11LAC-P02LPH0-0000 operates within -40°C to 120°C and supports 12A current rating. When application requirements fall within the ODU substitute's temperature and current specifications, the G11LAC-P02LPH0-0000 provides functional equivalence with identical connector topology, termination method, and ingress protection rating.

Frequently Asked Questions (FAQ)

Q: What determines if G11LAC-P02LPH0-0000 can replace EGA.1B.302.CLL?

A: Substitution is valid when the application's operating temperature range remains within -40°C to 120°C and current requirements do not exceed 12A. Both connectors share identical connector type, position count, termination method, fastening mechanism, mounting configuration, shielding, insert material, contact finish, and ingress protection rating.

Q: Are there differences in shell finish between these parts?

A: The EGA.1B.302.CLL features chrome finish on brass shell, while the G11LAC-P02LPH0-0000 uses chrome over nickel finish. Both finishes provide equivalent corrosion resistance and electrical performance for the specified applications.

Q: What is the impact of the 3A current rating difference?

A: The EGA.1B.302.CLL supports 15A while the G11LAC-P02LPH0-0000 supports 12A. Applications requiring current loads above 12A must use the LEMO part. Applications operating at or below 12A can use either connector without derating.

Q: Can the ODU substitute be used in high-temperature applications?

A: No. The G11LAC-P02LPH0-0000 operates to a maximum of 120°C. Applications requiring operation above 120°C or below -40°C must use the EGA.1B.302.CLL, which operates from -55°C to 250°C.

Q: Are both parts available in the same packaging?

A: Yes. Both the EGA.1B.302.CLL and G11LAC-P02LPH0-0000 are supplied in bulk packaging.