EEU-FC1C152 Equivalent & Substitute Parts

Part Overview

The EEU-FC1C152 is a 1500 µF, 16 V aluminum electrolytic capacitor in radial, can package manufactured by Panasonic Electronic Components. This component is rated for 5000 hours at 105°C and meets AEC-Q200 automotive qualification standards. The part is active and available in production quantities.

Equivalent and substitute parts are identified based on matching electrical specifications (capacitance, voltage rating, tolerance, and temperature performance) and mechanical compatibility (lead spacing, mounting type, and package form factor). Alternative sources provide equivalent functional performance within the specified parameter ranges.

Key Parameters

Parameter	Value
Capacitance	1500 µF
Voltage Rating	16 V
Tolerance	±20%
Lifetime @ 105°C	5000 Hrs
Operating Temperature Range	-55°C to 105°C
Polarization	Polar
Lead Spacing	0.197" (5.00 mm)
Mounting Type	Through Hole
Package Type	Radial, Can

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Electrical Equivalence: Capacitance value (1500 µF), voltage rating (16 V), and tolerance (±20%) must match exactly. Operating temperature range (-55°C to 105°C) must be maintained.

Mechanical Compatibility: Lead spacing (0.197" / 5.00 mm) and mounting type (through hole) must be identical to ensure PCB footprint compatibility. Package form (radial, can) must match.

Performance Parameters: Lifetime rating at 105°C, ripple current capability, and impedance are secondary selection criteria that may vary within acceptable ranges for equivalent substitution.

Compliance & Status: AEC-Q200 rating and RoHS3 compliance are maintained across all listed equivalents. Product status (active vs. not for new designs) is noted for design decision guidance.

Parameter Comparison

Part Number	Manufacturer	Capacitance	Voltage	Tolerance	Lifetime @ 105°C	Size Dia	Height (Max)	Impedance	Product Status	AEC-Q200
EEU-FC1C152	Panasonic	1500 µF	16 V	±20%	5000 Hrs	0.492" (12.50 mm)	0.787" (20.00 mm)	38 mOhms	Active	Yes
EEU-FC1C152L	Panasonic	1500 µF	16 V	±20%	3000 Hrs	0.394" (10.00 mm)	1.181" (30.00 mm)	35 mOhms	Active	Yes
ELXZ160ELL152MK20S	Chemi-Con	1500 µF	16 V	±20%	7000 Hrs	0.492" (12.50 mm)	0.846" (21.50 mm)	38 mOhms	Active	Yes
ELXZ160ELL152MJ30S	Chemi-Con	1500 µF	16 V	±20%	5000 Hrs	0.394" (10.00 mm)	1.240" (31.50 mm)	37 mOhms	Active	Yes
UPJ1C152MHD	Nichicon	1500 µF	16 V	±20%	5000 Hrs	0.492" (12.50 mm)	1.043" (26.50 mm)	48 mOhms	Not For New Designs	No
UPM1C152MHD	Nichicon	1500 µF	16 V	±20%	5000 Hrs	0.492" (12.50 mm)	1.063" (27.00 mm)	36 mOhms	Not For New Designs	Yes
UPS1C152MHD	Nichicon	1500 µF	16 V	±20%	3000 Hrs	0.492" (12.50 mm)	0.866" (22.00 mm)	75 mOhms	Not For New Designs	No
UPW1C152MPD6	Nichicon	1500 µF	16 V	±20%	5000 Hrs	0.394" (10.00 mm)	1.240" (31.50 mm)	35 mOhms	Not For New Designs	No

Engineering Selection Recommendations

For Active Production Designs: Select from Panasonic FC series (EEU-FC1C152, EEU-FC1C152L) or Chemi-Con LXZ series (ELXZ160ELL152MK20S, ELXZ160ELL152MJ30S). All four parts carry active product status and AEC-Q200 certification suitable for automotive applications.

Direct Replacement (Identical Footprint): EEU-FC1C152 and ELXZ160ELL152MK20S share identical lead spacing (5.00 mm) and similar can diameter (12.50 mm), enabling direct PCB substitution with minimal height variation (20.00 mm vs. 21.50 mm).

Space-Constrained Applications: EEU-FC1C152L and ELXZ160ELL152MJ30S feature reduced diameter (10.00 mm) but increased height (30.00 mm and 31.50 mm respectively). These are suitable only where radial height is not restricted.

Legacy Design Support: Nichicon UPM1C152MHD carries AEC-Q200 rating and 5000-hour lifetime but is marked "Not For New Designs." UPJ1C152MHD, UPS1C152MHD, and UPW1C152MPD6 are similarly restricted and lack current automotive qualification or reduced lifetime ratings.

Compliance Verification: All recommended active parts meet RoHS3 and REACH requirements. REACH status varies for legacy Nichicon parts; verify compliance requirements for specific applications.

Frequently Asked Questions (FAQ)

Q: Can EEU-FC1C152L substitute for EEU-FC1C152 on the same PCB?

A: Electrical substitution is valid (identical capacitance, voltage, tolerance, and temperature range). However, mechanical differences exist: EEU-FC1C152L has a smaller diameter (10.00 mm vs. 12.50 mm) but greater height (30.00 mm vs. 20.00 mm). PCB layout must accommodate the increased vertical dimension.

Q: What is the difference between Panasonic FC and Chemi-Con LXZ series?

A: Both series meet identical electrical specifications (1500 µF, 16 V, ±20%, -55°C to 105°C) and AEC-Q200 automotive standards. ELXZ160ELL152MK20S offers extended lifetime (7000 hours vs. 5000 hours at 105°C). Physical dimensions vary slightly; verify PCB clearance before substitution.

Q: Are Nichicon UPM and UPS series suitable for new automotive designs?

A: No. These parts carry "Not For New Designs" status. While UPM1C152MHD maintains AEC-Q200 certification and 5000-hour lifetime, Nichicon recommends against use in new production. UPS1C152MHD has reduced lifetime (3000 hours) and lacks AEC-Q200 rating.

Q: How do impedance differences affect circuit performance?

A: Impedance values range from 35 mOhms to 75 mOhms across listed parts. Lower impedance (35-38 mOhms) provides better high-frequency ripple current handling. UPS1C152MHD (75 mOhms) has significantly higher impedance and is not recommended for applications requiring low ESR performance.

Q: Can I use a substitute with lower lifetime rating (3000 hours vs. 5000 hours)?

A: Substitution with reduced lifetime is valid only if application requirements do not exceed the lower rating. EEU-FC1C152L and UPS1C152MHD both specify 3000 hours at 105°C. Verify thermal cycling and operational duty cycle requirements before selection.

Q: Are all listed parts through-hole mounted with 5.00 mm lead spacing?

A: Yes. All parts listed are through-hole mounted with 0.197" (5.00 mm) lead spacing and radial, can package form. PCB footprint compatibility is maintained across all substitutes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message