Equivalent & Substitute Parts for EEE-HA1J100P

Part Overview

The EEE-HA1J100P is a 10 µF, 63 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Panasonic Electronic Components. This part is rated for automotive applications with AEC-Q200 compliance and operates across -40°C to 105°C with a lifetime specification of 1000 hours at 105°C. The product status is Not For New Designs, making identification of active equivalent and substitute parts essential for ongoing production and design updates.

Substiute Parts

EEE-HA1J100P

Panasonic Electronic ComponentsIn Stock: 22934EEE-HA1J100P Datasheet

Current PartRFQ

EEE-FK1K100P

Panasonic Electronic ComponentsIn Stock: 24453EEE-FK1K100P Datasheet

UpgradeRFQ

EEE-TG1J100P

Panasonic Electronic ComponentsIn Stock: 2400EEE-TG1J100P Datasheet

UpgradeRFQ

EEE-HD1J100P

Panasonic Electronic ComponentsIn Stock: 7493EEE-HD1J100P Datasheet

SimilarRFQ

EMVH630ARA100MH63G

Chemi-ConIn Stock: 862EMVH630ARA100MH63G Datasheet

DirectRFQ

AFK106M80E16T-F

Cornell Dubilier Electronics (CDE)In Stock: 1120AFK106M80E16T-F Datasheet

UpgradeRFQ

EMVE630ARA100MF55G

Chemi-ConIn Stock: 14477EMVE630ARA100MF55G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the EEE-HA1J100P is determined by the following critical parameters: capacitance value (10 µF), voltage rating (minimum 63 V), tolerance (±20%), case size (8.00mm diameter), height compatibility, surface mount land pattern (8.30mm x 8.30mm), and mounting type (surface mount radial can). Parts are grouped into three categories based on substitution suitability:

Upgrade Substitutes maintain or exceed the original specifications while offering improved performance characteristics such as higher voltage ratings, extended lifetime, or lower ESR. These parts are direct functional replacements with enhanced reliability margins.

Similar Substitutes match the core electrical specifications and physical dimensions but originate from different manufacturers or series. These parts maintain equivalent performance within the specified parameter ranges.

Direct Substitutes are from alternative manufacturers and provide equivalent electrical and mechanical performance with identical or compatible physical footprints.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Same Specifications): EEE-TG1J100P and EEE-HD1J100P are active Panasonic alternatives with identical capacitance, voltage rating, and case dimensions. Both maintain AEC-Q200 compliance and RoHS3 status. EEE-HD1J100P offers extended lifetime (5000 hours at 105°C) compared to the original 1000 hours, providing improved reliability for automotive applications without design modification.

For Upgraded Performance: EEE-FK1K100P provides a 80 V voltage rating upgrade while maintaining the same 10 µF capacitance and case footprint. This part offers 2000-hour lifetime at 105°C and extended operating temperature range (-55°C to 105°C), suitable for applications requiring higher voltage margins. AFK106M80E16T-F from Cornell Dubilier offers equivalent 80 V, 10 µF specifications with AEC-Q200 compliance, though the surface mount land pattern width differs (9.50mm versus 8.30mm).

For Alternative Manufacturers: EMVH630ARA100MH63G (Chemi-Con) matches the 63 V, 10 µF specifications with identical case size and land pattern. EMVE630ARA100MF55G (Chemi-Con) provides equivalent electrical performance but uses a smaller 6.30mm case diameter with reduced land pattern size, requiring PCB layout modification.

All recommended substitutes maintain RoHS3 compliance and automotive-grade reliability ratings where specified.

Frequently Asked Questions (FAQ)

Q: Can EEE-FK1K100P replace EEE-HA1J100P directly on the PCB? A: Yes. Both parts share identical case diameter (8.00mm), surface mount land pattern (8.30mm x 8.30mm), and mounting type. The height difference (6.50mm versus 6.20mm) is within typical PCB clearance tolerances. The 80 V rating provides additional voltage margin without affecting circuit operation at 63 V nominal.

Q: What is the difference between EEE-TG1J100P and EEE-HD1J100P? A: Both are active Panasonic 10 µF, 63 V alternatives with identical physical dimensions. EEE-TG1J100P operates to 125°C with 1000-hour lifetime at that temperature. EEE-HD1J100P operates to 105°C with 5000-hour lifetime, offering significantly extended service life for standard automotive temperature ranges. Selection depends on application thermal requirements.

Q: Why does EMVE630ARA100MF55G have a smaller case size? A: EMVE630ARA100MF55G uses a 6.30mm diameter case versus the standard 8.00mm, resulting in a smaller footprint and reduced land pattern (6.60mm x 6.60mm). This part requires PCB layout modification and is not a direct drop-in replacement. Use only if space constraints justify redesign.

Q: Are all substitute parts AEC-Q200 rated? A: Panasonic parts (EEE-FK1K100P, EEE-TG1J100P, EEE-HD1J100P) and Cornell Dubilier AFK106M80E16T-F carry AEC-Q200 certification. Chemi-Con parts (EMVH630ARA100MH63G, EMVE630ARA100MF55G) do not specify AEC-Q200 rating in provided data. For automotive applications requiring AEC-Q200 compliance, use Panasonic or Cornell Dubilier alternatives.

Q: What is the impact of different ESR values on circuit performance? A: Lower ESR values reduce voltage ripple and heat generation. EEE-HD1J100P (2 Ohms) and EEE-FK1K100P (2.4 Ohms) provide lower ESR than the original specification. EMVH630ARA100MH63G (2000 mOhm) offers equivalent performance. Higher ESR may increase ripple voltage in high-frequency switching applications; verify circuit requirements before selection.

Q: Can AFK106M80E16T-F be used if the PCB land pattern is 8.30mm x 8.30mm? A: AFK106M80E16T-F has a land pattern width of 9.50mm, exceeding the standard 8.30mm. This requires PCB modification or selective placement adjustment. Use only if PCB layout permits the wider footprint or if design revision is acceptable.