Equivalent & Substitute Parts for EEE-HA1C471P

Part Overview

The Panasonic EEE-HA1C471P is a 470 µF, 16 V aluminum electrolytic capacitor in surface mount radial can package, rated for 1000 hours at 105°C. This component is classified as "Not For New Designs," indicating it has reached end-of-life status. Equivalent and substitute parts are necessary to maintain design continuity, support existing production lines, and enable migration to active product alternatives that meet current automotive and industrial standards.

Key Parameters

Parameter	Value
Capacitance	470 µF
Voltage Rating	16 V
Tolerance	±20%
Lifetime @ 105°C	1000 Hrs
Operating Temperature Range	-40°C ~ 105°C
Package / Case	Radial, Can - SMD
Size / Dimension	0.394" Dia (10.00mm)
Height - Seated (Max)	0.402" (10.20mm)
Surface Mount Land Size	0.406" L x 0.406" W (10.30mm x 10.30mm)
Mounting Type	Surface Mount
Polarization	Polar
AEC-Q200 Rating	Yes
RoHS Status	RoHS Compliant
MSL Rating	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the EEE-HA1C471P is determined by the following criteria:

Electrical Parameters (Must Match or Exceed):

Capacitance: 470 µF (fixed requirement)
Tolerance: ±20% (fixed requirement)
Voltage Rating: 16 V minimum (equal or higher voltage is acceptable)
Operating Temperature Range: -40°C ~ 105°C minimum (equal or wider range acceptable)

Mechanical Parameters (Must Match):

Package / Case: Radial, Can - SMD (exact match required)
Size / Dimension: 0.394" Dia (10.00mm) (exact match required)
Surface Mount Land Size: 0.406" L x 0.406" W (10.30mm x 10.30mm) (exact match required)
Mounting Type: Surface Mount (exact match required)

Compliance Parameters (Must Match or Exceed):

AEC-Q200 Rating: Required for automotive applications
RoHS Status: RoHS Compliant or ROHS3 Compliant acceptable
MSL Rating: 1 (Unlimited) or equivalent

Substitute parts are grouped into three categories: direct equivalents (same voltage rating), voltage-upgraded substitutes (higher voltage rating with same footprint), and manufacturer-recommended alternatives (enhanced performance characteristics).

Parameter Comparison

Part Number	Series	Capacitance	Voltage	Lifetime @ 105°C	Operating Temp Range	Height (Max)	Product Status	RoHS Status	Packaging
EEE-HA1C471P	HA	470 µF	16 V	1000 Hrs	-40°C ~ 105°C	0.402" (10.20mm)	Not For New Designs	RoHS Compliant	Tape & Reel (TR)
EEE-FC1C471AP	FC	470 µF	16 V	1000 Hrs	-40°C ~ 105°C	0.402" (10.20mm)	Not For New Designs	RoHS Compliant	Cut Tape (CT) & Digi-Reel®
EEE-HB1C471AP	HB	470 µF	16 V	2000 Hrs	-40°C ~ 105°C	0.402" (10.20mm)	Active	ROHS3 Compliant	Tape & Reel (TR)
EEE-HC1C471P	HC	470 µF	16 V	5000 Hrs	-40°C ~ 105°C	0.402" (10.20mm)	Active	ROHS3 Compliant	Tape & Reel (TR)
EEE-FC1E471AP	FC	470 µF	25 V	1000 Hrs	-40°C ~ 105°C	0.402" (10.20mm)	Not For New Designs	RoHS Compliant	Tape & Reel (TR)
EEE-FC1E471P	FC	470 µF	25 V	1000 Hrs	-40°C ~ 105°C	0.402" (10.20mm)	Not For New Designs	RoHS Compliant	Tape & Reel (TR)
EEE-FK1E471AP	FK	470 µF	25 V	2000 Hrs	-55°C ~ 105°C	0.413" (10.50mm)	Active	ROHS3 Compliant	Tape & Reel (TR)
EEE-HAE471UAP	HA	470 µF	25 V	1000 Hrs	-40°C ~ 105°C	0.402" (10.20mm)	Active	ROHS3 Compliant	Tape & Reel (TR)
EEE-HBE471UAP	HB	470 µF	25 V	2000 Hrs	-40°C ~ 105°C	0.402" (10.20mm)	Active	ROHS3 Compliant	Tape & Reel (TR)
EEE-FP1E471AP	FP	470 µF	25 V	2000 Hrs	-55°C ~ 105°C	0.402" (10.20mm)	Active	ROHS3 Compliant	Cut Tape (CT) & Digi-Reel®
EEE-FN1V471UP	FN	470 µF	35 V	2000 Hrs	-55°C ~ 105°C	0.413" (10.50mm)	Active	ROHS3 Compliant	Tape & Reel (TR)

Engineering Selection Recommendations

Same Voltage (16 V) - Direct Substitutes:

EEE-HB1C471AP and EEE-HC1C471P are direct mechanical and electrical substitutes for the EEE-HA1C471P. Both maintain the 16 V rating and identical footprint. EEE-HB1C471AP offers extended lifetime (2000 Hrs @ 105°C) with Active product status and ROHS3 compliance. EEE-HC1C471P provides the longest lifetime (5000 Hrs @ 105°C) and is also Active with ROHS3 compliance. Both are suitable for direct replacement in existing designs without circuit modification.

Voltage-Upgraded Substitutes (25 V) - Footprint Compatible:

EEE-HAE471UAP, EEE-HBE471UAP, EEE-FP1E471AP, and EEE-FC1E471AP/EEE-FC1E471P provide 25 V rating while maintaining the same 0.402" (10.20mm) height and footprint. These are electrically compatible upgrades that provide higher voltage margin. EEE-HAE471UAP and EEE-HBE471UAP maintain the HA/HB series characteristics with Active status. EEE-FP1E471AP is Active with extended temperature range (-55°C ~ 105°C) and 2000 Hrs lifetime.

Higher Voltage Alternative (35 V) - Height Variation:

EEE-FN1V471UP is a manufacturer-recommended alternative with 35 V rating and 2000 Hrs lifetime. Height increases to 0.413" (10.50mm), requiring PCB layout verification. This part is Active with ROHS3 compliance and extended operating temperature range (-55°C ~ 105°C).

Packaging Consideration:

EEE-FC1C471AP is available in Cut Tape (CT) & Digi-Reel® packaging, differing from the standard Tape & Reel format of the original part. Verify packaging compatibility with assembly equipment before selection.

Frequently Asked Questions (FAQ)

Q: Can EEE-HB1C471AP directly replace EEE-HA1C471P without circuit changes?

A: Yes. EEE-HB1C471AP is a direct mechanical and electrical substitute with identical 470 µF capacitance, 16 V rating, and footprint. The extended lifetime (2000 Hrs vs. 1000 Hrs @ 105°C) provides improved reliability without requiring design modification.

Q: What is the difference between 16 V and 25 V rated substitutes?

A: The 25 V rated parts (EEE-HAE471UAP, EEE-HBE471UAP, EEE-FP1E471AP) provide higher voltage margin in the circuit. They are electrically compatible with 16 V designs and maintain identical footprints. Selection depends on circuit voltage requirements and available board space.

Q: Why does EEE-FK1E471AP have a different height (0.413" vs. 0.402")?

A: The increased height reflects the FK series design with enhanced performance characteristics (80 mOhm impedance, 2000 Hrs lifetime, extended temperature range). PCB layout must accommodate the 0.011" height increase. Verify clearance with adjacent components before substitution.

Q: Is EEE-FN1V471UP compatible with the original footprint?

A: EEE-FN1V471UP maintains the same 0.406" L x 0.406" W land size but has increased height (0.413" vs. 0.402"). The 35 V rating provides additional voltage margin. Verify PCB clearance and circuit voltage requirements before selection.

Q: What is the difference between RoHS and ROHS3 compliance?

A: Both designations indicate lead-free compliance. ROHS3 represents the current standard with additional substance restrictions. Parts marked ROHS3 Compliant (EEE-HB1C471AP, EEE-HC1C471P, EEE-FK1E471AP, EEE-HAE471UAP, EEE-HBE471UAP, EEE-FP1E471AP, EEE-FN1V471UP) are preferred for new designs and long-term supply continuity.

Q: Can I use EEE-FC1C471AP as a substitute if my assembly line uses Cut Tape packaging?

A: Yes, if your assembly equipment supports Cut Tape (CT) & Digi-Reel® format. EEE-FC1C471AP is electrically and mechanically equivalent to EEE-HA1C471P with identical 16 V rating and footprint. Verify packaging compatibility with your feeder systems before implementation.

Q: Which substitute offers the best long-term availability?

A: EEE-HC1C471P (5000 Hrs @ 105°C), EEE-FK1E471AP (2000 Hrs, extended temperature), and EEE-FP1E471AP (2000 Hrs, extended temperature) are all Active products with ROHS3 compliance, indicating current production and long-term supply support. EEE-HA1C471P, EEE-FC1C471AP, and EEE-FC1E471AP are marked "Not For New Designs" and should not be selected for new applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message