ECW-FE2J224PD Film Capacitor Equivalent & Substitute Parts

Part Overview

The ECW-FE2J224PD is a 0.22 µF film capacitor manufactured by Panasonic Electronic Components, designed for applications requiring EMI/RFI suppression, high-frequency switching, and high pulse DV/DT performance. This radial through-hole component operates across a temperature range of -40°C to 105°C and is rated for 630V DC operation. The part is currently in active production status with 1450 units available in stock. Substitute parts are identified when electrical and mechanical parameters align within the specified tolerances and ratings for this product category.

Substiute Parts

ECW-FE2J224PD

Panasonic Electronic ComponentsIn Stock: 1464ECW-FE2J224PD Datasheet

Current PartRFQ

ECW-FE2J224P5

Panasonic Electronic ComponentsIn Stock: 1801ECW-FE2J224P5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ECW-FE2J224PD is determined by strict equivalence across the following critical parameters:

• Capacitance value: 0.22 µF
• Tolerance specification: ±5%
• Voltage ratings: 630V DC / 141V AC
• Dielectric material: Polypropylene (PP), Metallized
• Operating temperature range: -40°C ~ 105°C
• Mounting configuration: Through Hole, Radial
• Lead spacing: 0.886" (22.50mm)
• Termination type: PC Pins

Parts meeting all these criteria are classified as parametric equivalents and may be used interchangeably in circuit applications where the ECW-FE2J224PD is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the ECW-FE2J224PD and ECW-FE2J224P5 are active production components manufactured by Panasonic Electronic Components. Both parts maintain ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for electronic component procurement. Selection between these equivalent parts may be based on inventory availability and lead time considerations, as both components satisfy identical electrical and mechanical specifications for applications requiring 0.22 µF film capacitors at 630V DC ratings with polypropylene dielectric construction.

Frequently Asked Questions (FAQ)

Q: Can ECW-FE2J224P5 be used as a direct replacement for ECW-FE2J224PD?

A: Yes. Both parts are parametric equivalents with identical capacitance, voltage ratings, dielectric material, operating temperature range, physical dimensions, and lead spacing. They are interchangeable in circuit applications.

Q: What determines if a part is a valid substitute for the ECW-FE2J224PD?

A: A substitute must match all critical parameters: 0.22 µF capacitance, ±5% tolerance, 630V DC / 141V AC ratings, polypropylene metallized dielectric, -40°C to 105°C operating range, through-hole radial mounting, 22.50mm lead spacing, and PC pin termination.

Q: Are there any compliance differences between ECW-FE2J224PD and ECW-FE2J224P5?

A: No. Both parts maintain identical RoHS3 compliance and REACH unaffected status.

Q: Do these parts have the same physical footprint?

A: Yes. Both components share identical dimensions (26.00mm L x 6.00mm W), maximum seated height (14.60mm), and lead spacing (22.50mm), ensuring PCB layout compatibility.

Q: What applications are these capacitors suitable for?

A: Both parts are rated for EMI/RFI suppression, high-frequency switching, and high pulse DV/DT applications within the specified voltage and temperature parameters.