ECQ-UBAF562VB Equivalent & Substitute Parts

Part Overview

The ECQ-UBAF562VB is a 5600 pF film capacitor manufactured by Panasonic Electronic Components, designed for EMI and RFI suppression applications. This radial polypropylene metallized capacitor operates at 300V AC with ±10% tolerance and is rated for X1, Y2 safety classifications. The part is currently active in production with 1100 pieces available in stock. Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative sourcing while maintaining identical electrical and mechanical performance.

Substiute Parts

ECQ-UBAF562VB

Panasonic Electronic ComponentsIn Stock: 1160ECQ-UBAF562VB Datasheet

Current PartRFQ

ECQ-UBAF562V5

Panasonic Electronic ComponentsIn Stock: 1877ECQ-UBAF562V5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ECQ-UBAF562VB are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters:

Electrical Parameters:

• Capacitance value: 5600 pF
• Tolerance: ±10%
• Voltage Rating - AC: 300V
• Dielectric Material: Polypropylene (PP), Metallized
• Operating Temperature Range: -40°C ~ 110°C
• Safety Ratings: X1, Y2

Mechanical Parameters:

• Mounting Type: Through Hole
• Package / Case: Radial
• Size / Dimension: 0.602" L x 0.197" W (15.30mm x 5.00mm)
• Height - Seated (Max): 0.669" (17.00mm)
• Lead Spacing: 0.591" (15.00mm)
• Termination: PC Pins

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

Parts meeting all parameters listed above are classified as direct parametric equivalents and are suitable for one-to-one replacement in circuit designs.

Parameter Comparison

Engineering Selection Recommendations

Both the ECQ-UBAF562VB and ECQ-UBAF562V5 are active production parts manufactured by Panasonic Electronic Components within the ECQUB series. Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and distribution.

The ECQ-UBAF562V5 is a direct parametric equivalent to the ECQ-UBAF562VB. All electrical specifications, mechanical dimensions, termination characteristics, and safety ratings are identical. Both parts are suitable for EMI and RFI suppression applications requiring 5600 pF capacitance at 300V AC with polypropylene metallized dielectric construction.

Selection between these parts is based on inventory availability and procurement lead times. The ECQ-UBAF562V5 currently has 1786 pieces in stock compared to 1100 pieces for the ECQ-UBAF562VB, providing greater availability for high-volume production requirements.

Frequently Asked Questions (FAQ)

Q: Can ECQ-UBAF562V5 be used as a direct replacement for ECQ-UBAF562VB?

A: Yes. The ECQ-UBAF562V5 is a direct parametric equivalent. All electrical parameters, mechanical dimensions, lead spacing, and safety ratings are identical. No circuit modifications or board layout adjustments are required.

Q: Are there any differences in the dielectric material or operating temperature range?

A: No. Both parts use polypropylene (PP) metallized dielectric and operate across the identical temperature range of -40°C to 110°C.

Q: Do both parts meet the same compliance standards?

A: Yes. Both ECQ-UBAF562VB and ECQ-UBAF562V5 are ROHS3 compliant and REACH unaffected. Both carry X1, Y2 safety ratings for EMI and RFI suppression applications.

Q: Are the physical dimensions and lead spacing identical?

A: Yes. Both parts have identical dimensions of 0.602" L x 0.197" W (15.30mm x 5.00mm), maximum seated height of 0.669" (17.00mm), and lead spacing of 0.591" (15.00mm). Both use PC pin termination for through-hole mounting.

Q: What is the difference between these two part numbers?

A: The ECQ-UBAF562VB and ECQ-UBAF562V5 are variants within the same ECQUB series with identical specifications. The difference in part number designation reflects manufacturing or packaging variations that do not affect electrical or mechanical performance.

Q: Can these parts be used interchangeably in production?

A: Yes. Both parts are active production components with identical parametric specifications and can be used interchangeably in circuit designs without any functional impact.