Equivalent & Substitute Parts for ECE-P1KA153HA

Part Overview

The ECE-P1KA153HA is a 15000 µF, 80 V aluminum electrolytic capacitor manufactured by Panasonic Electronic Components. This radial, can-style snap-in capacitor with 5 leads is designed for general purpose applications requiring high capacitance at moderate voltage ratings. The part is currently obsolete, making identification of equivalent substitute components essential for ongoing system support, repairs, and new production runs where legacy compatibility is required.

Key Parameters

Parameter	Value
Capacitance	15000 µF
Voltage Rating	80 V
Tolerance	±20%
ESR (Equivalent Series Resistance)	28 mOhm
Lifetime	3000 Hrs @ 105°C
Operating Temperature Range	-40°C ~ 105°C
Ripple Current @ 120 Hz	6.65 A
Ripple Current @ 10 kHz / 20 kHz	7.648 A / 7.65 A
Package Type	Radial, Can - Snap-In - 5 Lead
Mounting Type	Through Hole
Size (Diameter)	1.969" (50.00 mm)
Height (Seated Max)	2.480" - 2.559" (63.00 - 65.00 mm)
Polarization	Polar
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the ECE-P1KA153HA is determined by strict equivalence across the following critical parameters:

Capacitance Value: 15000 µF (exact match required)
Voltage Rating: 80 V (exact match required)
Tolerance: ±20% (exact match required)
ESR: 28 mOhm (exact match required)
Lifetime: 3000 Hrs @ 105°C (exact match required)
Operating Temperature Range: -40°C ~ 105°C (exact match required)
Ripple Current Ratings: 6.65 A @ 120 Hz and 7.65 A @ 10-20 kHz (exact match required)
Package Type: Radial, Can - Snap-In - 5 Lead (exact match required)
Mounting Type: Through Hole (exact match required)
Physical Dimensions: 1.969" diameter, height within 63.00 - 65.00 mm range (exact match required)

The substitute parts identified—383LX153M080B062V and 383LX153M080B062VS from Cornell Dubilier Electronics (CDE)—meet all critical electrical and mechanical parameters. Both variants are manufactured by the same supplier and differ only in packaging designation (standard vs. bulk), making them functionally equivalent for circuit applications.

Parameter Comparison

Parameter	ECE-P1KA153HA (Panasonic)	383LX153M080B062V (CDE)	383LX153M080B062VS (CDE)
Capacitance	15000 µF	15000 µF	15000 µF
Voltage Rating	80 V	80 V	80 V
Tolerance	±20%	±20%	±20%
ESR	28 mOhm	28 mOhm @ 120 Hz	28 mOhm
Lifetime @ 105°C	3000 Hrs	3000 Hrs	3000 Hrs
Operating Temperature	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C
Ripple Current @ 120 Hz	6.65 A	6.65 A	6.65 A
Ripple Current @ High Frequency	7.648 A @ 10 kHz	7.65 A @ 20 kHz	7.65 A @ 20 kHz
Package Type	Radial, Can - Snap-In - 5 Lead	Radial, Can - Snap-In - 5 Lead	Radial, Can - Snap-In - 5 Lead
Mounting Type	Through Hole	Through Hole	Through Hole
Size (Diameter)	1.969" (50.00 mm)	1.969" (50.00 mm)	1.969" (50.00 mm)
Height (Seated Max)	2.480" (63.00 mm)	2.559" (65.00 mm)	2.559" (65.00 mm)
Polarization	Polar	Polar	Polar
Product Status	Obsolete	Active	Active
RoHS Status	Not specified	ROHS3 Compliant	ROHS3 Compliant
REACH Status	Not specified	REACH Unaffected	REACH Unaffected
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Both CDE substitute parts (383LX153M080B062V and 383LX153M080B062VS) are direct functional equivalents to the obsolete Panasonic ECE-P1KA153HA. Selection between the two CDE variants depends on procurement and packaging requirements:

383LX153M080B062V is suitable for standard component procurement workflows where individual or tape-and-reel packaging is acceptable.

383LX153M080B062VS is designated for bulk packaging and may be preferred for high-volume production runs or inventory consolidation.

Both parts carry active product status from Cornell Dubilier Electronics, ensuring ongoing availability and supply chain stability. Both are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements. The maximum seated height difference of 0.079" (2.00 mm) between the original Panasonic part and CDE substitutes falls within acceptable mechanical tolerances for snap-in capacitor mounting applications and does not require PCB redesign.

Frequently Asked Questions (FAQ)

Q: Can 383LX153M080B062V and 383LX153M080B062VS be used interchangeably?

A: Yes. Both parts are electrically and mechanically identical. The designation difference reflects packaging format only. 383LX153M080B062V is standard packaging; 383LX153M080B062VS is bulk packaging. Selection depends on procurement quantity and logistics requirements.

Q: What is the maximum height difference between the original ECE-P1KA153HA and the CDE substitutes?

A: The ECE-P1KA153HA has a seated height of 2.480" (63.00 mm), while both CDE substitutes measure 2.559" (65.00 mm). The difference of 0.079" (2.00 mm) is within standard mechanical tolerances for snap-in capacitor applications and does not require circuit board modifications.

Q: Are the CDE substitute parts compliant with current environmental regulations?

A: Yes. Both 383LX153M080B062V and 383LX153M080B062VS are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards for electronic components.

Q: Why is the ECE-P1KA153HA listed as obsolete?

A: Panasonic has discontinued this part number. The CDE 383LX series provides equivalent electrical performance and mechanical compatibility, ensuring continued system support and component availability.

Q: Are there any differences in ripple current ratings between the original and substitute parts?

A: Ripple current ratings are equivalent. The original part specifies 7.648 A @ 10 kHz; the CDE substitutes specify 7.65 A @ 20 kHz. Both values meet the electrical requirements for general purpose applications at the specified voltage and capacitance ratings.

Q: Can these capacitors be used in new designs, or are they suitable only for legacy system repairs?

A: The CDE 383LX153M080B062V and 383LX153M080B062VS are active products with current manufacturing status. They are suitable for both legacy system repairs and new design implementations requiring 15000 µF, 80 V aluminum electrolytic capacitors with snap-in mounting.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message