E2E-X2F1-R 2M Equivalent & Substitute Parts

Part Overview

The E2E-X2F1-R 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with a 2mm (0.079") sensing distance and delivers PNP normally-open output signals suitable for control circuits and programmable logic controllers.

The E2E-X2F1-R 2M is classified as obsolete. Locating equivalent substitute parts is necessary to maintain system continuity, ensure supply chain reliability, and support ongoing maintenance and replacement requirements for installed equipment.

Substiute Parts

E2E-X2F1-R 2M

Omron Automation and SafetyIn Stock: 1066E2E-X2F1-R 2M Datasheet

Current PartRFQ

E2E-X2B1D12-R 2M

Omron Automation and SafetyIn Stock: 772E2E-X2B1D12-R 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the E2E-X2F1-R 2M are identified based on functional and electrical equivalence across the following critical parameters:

Electrical Compatibility:

• Identical sensor type (Inductive)
• Matching sensing distance (0.079" / 2mm)
• Identical output configuration (PNP-NO, 3-Wire)
• Matching response frequency (1.5kHz)
• Identical supply voltage range (10V ~ 30V)

Environmental & Mechanical Compatibility:

• Matching operating temperature range (-40°C ~ 85°C)
• Equivalent or superior ingress protection (IP67 minimum)
• Identical package form factor (Cylinder, Threaded - M12)
• Matching shielding specification (Shielded)
• Identical body material (Nickel-Plated Brass)

Regulatory Compliance:

• RoHS Compliant status maintained

The E2E-X2B1D12-R 2M satisfies all substitution criteria and represents the direct functional equivalent for the obsolete E2E-X2F1-R 2M.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X2B1D12-R 2M is the direct functional substitute for the obsolete E2E-X2F1-R 2M. Both sensors share identical electrical specifications, sensing characteristics, and environmental ratings. The substitute part is currently in active production status, ensuring long-term availability and supply chain continuity.

The primary difference between the main part and substitute is the termination style: the E2E-X2F1-R 2M features wire leads, while the E2E-X2B1D12-R 2M features cable leads. This difference does not affect electrical compatibility or functional performance. Cable lead termination provides enhanced durability and strain relief in industrial environments.

The E2E-X2B1D12-R 2M carries an enhanced ingress protection rating of IP67 and IP69K, compared to the IP67 rating of the original part. This represents an improvement in environmental protection capability and does not introduce any compatibility issues.

Both parts maintain RoHS compliance and are manufactured from identical materials. The substitute part is classified under ECCN EAR99 and HTSUS 8543.70.9860 for regulatory and trade documentation purposes.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X2B1D12-R 2M directly replace the E2E-X2F1-R 2M in existing installations?

A: Yes. The substitute part is electrically and functionally equivalent. Both sensors deliver identical PNP-NO output signals, operate across the same voltage range (10V ~ 30V), and share the same sensing distance (2mm), response frequency (1.5kHz), and environmental operating range (-40°C ~ 85°C). The M12 threaded cylinder package ensures mechanical compatibility with existing mounting hardware.

Q: What is the difference between wire leads and cable leads termination?

A: Wire leads consist of individual stranded conductors extending from the sensor body. Cable leads integrate the conductors within a protective cable jacket. Cable leads provide improved mechanical protection, strain relief, and durability in industrial environments subject to vibration or mechanical stress. Both termination styles deliver identical electrical performance.

Q: Does the higher IP69K rating of the substitute part affect compatibility?

A: No. IP69K represents an enhanced ingress protection specification that exceeds the IP67 requirement of the original part. The substitute part maintains full IP67 compatibility while offering superior protection against high-pressure water jets and steam cleaning. This enhancement does not introduce any compatibility concerns.

Q: Are both parts RoHS compliant?

A: Yes. Both the E2E-X2F1-R 2M and E2E-X2B1D12-R 2M are RoHS compliant and manufactured from identical materials, including nickel-plated brass bodies. No regulatory or environmental compliance issues arise from substitution.

Q: What is the availability status of each part?

A: The E2E-X2F1-R 2M is classified as obsolete. The E2E-X2B1D12-R 2M is in active production, ensuring reliable long-term availability and supply chain support for new installations and replacement requirements.

Q: Are the sensing characteristics identical between both parts?

A: Yes. Both sensors are inductive proximity sensors with a 2mm (0.079") sensing distance, 1.5kHz response frequency, and shielded design. Detection performance and response characteristics are identical across all operating conditions within the specified temperature range.