E2E-X2F1 5M Equivalent & Substitute Parts

Part Overview

The E2E-X2F1 5M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates at a 2mm sensing distance with PNP-NO output configuration and is housed in a shielded M12 threaded cylinder package. The product is classified as obsolete, necessitating identification of active equivalent models to maintain system continuity and ensure ongoing component availability for new installations and field replacements.

Substiute Parts

E2E-X2F1 5M

Omron Automation and SafetyIn Stock: 1122E2E-X2F1 5M Datasheet

Current PartRFQ

E2E-X2B1D12 5M

Omron Automation and SafetyIn Stock: 809E2E-X2B1D12 5M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete E2E-X2F1 5M is determined by strict equivalence across the following critical parameters:

Electrical Compatibility:

• Sensor Type: Inductive
• Output Type: PNP-NO, 3-Wire
• Voltage Supply Range: 10V ~ 30V
• Response Frequency: 1.5kHz

Mechanical Compatibility:

• Sensing Distance: 0.079" (2mm)
• Package / Case: Cylinder, Threaded - M12
• Shielding: Shielded
• Material - Body: Nickel-Plated Brass

Environmental & Compliance:

• Operating Temperature: -40°C ~ 85°C
• Ingress Protection: IP67 (minimum)
• RoHS Status: RoHS Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The E2E-X2B1D12 5M satisfies all critical substitution parameters while offering active product status and enhanced ingress protection rating (IP69K in addition to IP67).

Parameter Comparison

Engineering Selection Recommendations

The E2E-X2B1D12 5M is the direct functional equivalent for the obsolete E2E-X2F1 5M. Selection of this substitute is supported by the following engineering factors:

Product Status: The E2E-X2B1D12 5M maintains active product status with Omron Automation and Safety, ensuring continued availability, technical support, and manufacturing consistency. The original E2E-X2F1 5M is classified as obsolete and subject to discontinuation.

Compliance & Certifications: Both parts maintain RoHS compliance and identical moisture sensitivity ratings. The substitute carries ECCN classification EAR99 and HTSUS code 8543.70.9860, indicating standard commercial availability.

Electrical & Mechanical Equivalence: All critical electrical parameters (output type, voltage range, response frequency) and mechanical specifications (sensing distance, M12 package, shielding, body material) are identical between the main part and substitute.

Enhanced Environmental Protection: The E2E-X2B1D12 5M provides IP69K ingress protection in addition to the IP67 rating of the original part, offering superior environmental sealing for applications requiring high-pressure wash-down or submersion resistance.

Termination Consideration: The substitute features cable leads termination in place of wire leads. This difference requires assessment of the installation method and connector compatibility within the target application.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X2B1D12 5M directly replace the E2E-X2F1 5M in existing installations?

A: The E2E-X2B1D12 5M is electrically and mechanically equivalent across all critical parameters. The primary consideration is termination style: the substitute uses cable leads rather than wire leads. If the existing installation accommodates M12 connector interfaces, direct substitution is feasible. If the original installation uses direct wire connections, termination adaptation may be required.

Q: What is the difference between IP67 and IP69K ratings?

A: Both ratings provide sealed protection against dust and water ingress. IP67 specifies protection against temporary immersion in water up to 1 meter for 30 minutes. IP69K provides protection against high-pressure, high-temperature water jets. The E2E-X2B1D12 5M meets both standards, offering enhanced protection compared to the original part's IP67 rating.

Q: Are the sensing distances identical between these parts?

A: Yes. Both the E2E-X2F1 5M and E2E-X2B1D12 5M operate at 0.079" (2mm) sensing distance. This parameter is identical and ensures equivalent detection performance in applications designed for the original part.

Q: What is the significance of the E2E NEXT series designation?

A: The E2E-X2B1D12 5M belongs to the E2E NEXT series, which represents the current generation of Omron inductive proximity sensors. The original E2E-X2F1 5M belongs to the legacy E2E series. The NEXT series maintains backward compatibility with critical electrical and mechanical specifications while incorporating design improvements and enhanced environmental protection.

Q: Are there any differences in response frequency or switching speed?

A: No. Both parts operate at 1.5kHz response frequency, ensuring identical switching speed and detection response characteristics in control applications.

Q: What certifications apply to the substitute part?

A: The E2E-X2B1D12 5M is RoHS compliant, carries ECCN classification EAR99, and is assigned HTSUS code 8543.70.9860. These designations confirm standard commercial availability and regulatory compliance for industrial automation applications.