Omron E2E-X2F1 Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The Omron E2E-X2F1 is a cylindrical inductive proximity sensor with a 2mm sensing distance, designed for industrial automation applications requiring non-contact object detection. This sensor operates as a PNP normally-open (NO) output device with 3-wire configuration and is housed in a shielded M12 threaded cylinder package.

The E2E-X2F1 is classified as obsolete. Locating equivalent or substitute components is necessary to maintain system functionality and ensure continued availability for replacement or new installations. The recommended substitute maintains core electrical and mechanical compatibility while offering active product status and enhanced environmental protection ratings.

Substiute Parts

E2E-X2F1

Omron Automation and SafetyIn Stock: 1116E2E-X2F1 Datasheet

Current PartRFQ

E2E-X2B1D12 2M

Omron Automation and SafetyIn Stock: 1206E2E-X2B1D12 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X2F1 is based on strict alignment of the following critical parameters:

• Sensor Type: Inductive (unchanged)
• Sensing Distance: 0.079" (2mm) (unchanged)
• Output Type: PNP-NO, 3-Wire (unchanged)
• Response Frequency: 1.5kHz (unchanged)
• Package / Case: Cylinder, Threaded - M12 (unchanged)
• Shielding: Shielded (unchanged)
• Material - Body: Nickel-Plated Brass (unchanged)
• Termination Style: Cable Leads (unchanged)
• Operating Temperature: -40°C ~ 85°C (unchanged)
• RoHS Status: RoHS Compliant (unchanged)

The substitute part E2E-X2B1D12 2M maintains all critical electrical and mechanical parameters. Variations in voltage supply range and enhanced ingress protection ratings do not affect functional compatibility in applications designed for the original E2E-X2F1.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X2B1D12 2M is the manufacturer-recommended substitute for the obsolete E2E-X2F1. Both sensors are RoHS compliant and carry identical ECCN and HTSUS classifications, ensuring regulatory consistency.

The substitute part is classified as active product status, providing assured long-term availability and supply chain continuity. The E2E-X2B1D12 2M belongs to the E2E NEXT series, representing the current generation of Omron's 2mm inductive proximity sensor line.

All critical electrical parameters—sensor type, sensing distance, output configuration, response frequency, and operating temperature range—are identical between the two parts. The substitute offers an expanded ingress protection rating (IP67, IP69K) compared to the original (IP67), providing enhanced environmental sealing without compromising compatibility.

The voltage supply range of the substitute (10V ~ 30V) is a subset of the original (10V ~ 40V). Applications operating within the 10V ~ 30V window will function identically. Applications requiring operation above 30V must retain the original E2E-X2F1 or identify alternative solutions.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X2B1D12 2M directly replace the E2E-X2F1 in existing installations?

A: Yes, for applications operating within the 10V ~ 30V supply voltage range. The substitute maintains identical sensing distance, output type, response frequency, operating temperature, and M12 mechanical interface. Verify your system voltage before substitution.

Q: What is the difference in ingress protection between these sensors?

A: The E2E-X2F1 provides IP67 protection. The E2E-X2B1D12 2M provides both IP67 and IP69K ratings, offering enhanced resistance to high-pressure water jets. This improvement does not affect compatibility in standard industrial environments.

Q: Why is the E2E-X2F1 listed as obsolete?

A: The E2E-X2F1 has been superseded by the E2E NEXT series, of which the E2E-X2B1D12 2M is a member. Omron has transitioned production to the newer generation while maintaining electrical and mechanical compatibility.

Q: Are there any wiring or connector differences between these sensors?

A: Both sensors use cable leads for termination and maintain identical 3-wire PNP-NO output configuration. No wiring modifications are required for substitution within compatible voltage ranges.

Q: What is the voltage supply limitation of the substitute part?

A: The E2E-X2B1D12 2M operates within 10V ~ 30V, compared to the original 10V ~ 40V range. If your application requires operation above 30V, the original E2E-X2F1 specifications must be maintained or an alternative sensor selected.

Q: Are both sensors RoHS compliant?

A: Yes. Both the E2E-X2F1 and E2E-X2B1D12 2M are RoHS compliant and carry identical regulatory classifications (ECCN: EAR99, HTSUS: 8543.70.9860).