E2A-M18LS08-WP-C1 5M Equivalent & Substitute Parts

Part Overview

The E2A-M18LS08-WP-C1 5M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with an 8mm sensing distance and provides NPN-NO output configuration suitable for control circuits and PLC integration. The product is currently classified as obsolete, necessitating identification of functionally equivalent alternatives to maintain system continuity and support ongoing maintenance requirements.

Substiute Parts

E2A-M18LS08-WP-C1 5M

Omron Automation and SafetyIn Stock: 1209E2A-M18LS08-WP-C1 5M Datasheet

Current PartRFQ

E2E-X8C1L18 5M

Omron Automation and SafetyIn Stock: 975E2E-X8C1L18 5M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2A-M18LS08-WP-C1 5M is determined by strict alignment of the following critical parameters:

• Sensor Type: Inductive (non-contact detection principle)
• Sensing Distance: 0.315" (8mm) (detection range requirement)
• Output Type: NPN-NO, 3-Wire (signal logic and circuit interface)
• Response Frequency: 500Hz (switching speed capability)
• Package / Case: Cylinder, Threaded - M18 (mechanical form factor and mounting)
• Termination Style: Cable Leads (connection method)
• Ingress Protection: IP67, IP69K (environmental sealing)
• Shielding: Shielded (electromagnetic interference rejection)

The E2E-X8C1L18 5M qualifies as a direct substitute based on matching all critical parameters. Voltage supply range and operating temperature range variations are acceptable within industrial automation standards, provided the application operates within the overlapping specification window.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X8C1L18 5M is the qualified substitute for the obsolete E2A-M18LS08-WP-C1 5M. Selection is based on the following engineering criteria:

• All critical functional parameters match exactly, ensuring drop-in compatibility in existing circuit designs and mechanical assemblies.
• The substitute part maintains RoHS compliance, satisfying regulatory and environmental requirements.
• The substitute is classified as Active product status, ensuring long-term availability, supply chain continuity, and manufacturer support.
• Voltage supply and operating temperature ranges overlap sufficiently for standard industrial automation applications operating within -25°C to +30V specifications.
• Identical mechanical form factor (M18 threaded cylinder) and cable lead termination enable direct physical replacement without mounting or wiring modifications.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X8C1L18 5M be used as a direct replacement for the E2A-M18LS08-WP-C1 5M?

A: Yes. The substitute part matches all critical parameters including sensor type, sensing distance, output configuration, response frequency, mechanical form factor, and environmental protection ratings. No circuit redesign or mechanical modification is required.

Q: What is the difference in voltage supply range between these parts?

A: The original part operates at 10V ~ 32V, while the substitute operates at 10V ~ 30V. Both parts function correctly within the 10V ~ 30V overlap range. Applications requiring operation above 30V must use the original part or identify an