Omron E2A-M08LS02-M1-C2 Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The Omron E2A-M08LS02-M1-C2 is a cylindrical inductive proximity sensor designed for non-contact object detection at 2mm sensing distance. This component operates as a 3-wire NPN-NC output device with shielded construction and M8 threaded connector termination. The E2A-M08LS02-M1-C2 is classified as obsolete product status. Identifying equivalent substitute parts is necessary to ensure continued system availability, maintain supply chain reliability, and support long-term equipment maintenance where original components are no longer manufactured.

Substiute Parts

E2A-M08LS02-M1-C2

Omron Automation and SafetyIn Stock: 967E2A-M08LS02-M1-C2 Datasheet

Current PartRFQ

E2A-S08LS02-M1-C2

Omron Automation and SafetyIn Stock: 832E2A-S08LS02-M1-C2 Datasheet

DirectRFQ

E2E-X2C2L8-M1

Omron Automation and SafetyIn Stock: 906E2E-X2C2L8-M1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the E2A-M08LS02-M1-C2 are qualified based on the following critical parameters that determine functional and mechanical compatibility:

• Sensor Type: Inductive
• Sensing Distance: 0.079" (2mm)
• Output Type: NPN-NC, 3-Wire
• Response Frequency: 1.5kHz
• Shielding: Shielded
• Voltage Supply Range: Minimum 10V, Maximum 30V or higher
• Termination Style: Connector
• Package / Case: Cylinder, Threaded - M8
• Ingress Protection: IP67, IP69K
• Indicator: LED

The identified substitute parts maintain these core electrical and mechanical specifications, ensuring direct functional replacement in existing circuit designs and mechanical assemblies. Variations in body material and operating temperature ranges are noted where they differ from the original component.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts maintain full electrical and mechanical compatibility with the original E2A-M08LS02-M1-C2 specification. Selection between alternatives should be based on the following criteria:

E2A-S08LS02-M1-C2: This part is an active product within the E2A series and represents the direct generational equivalent. It features stainless steel body construction, which provides enhanced corrosion resistance compared to the nickel-plated brass of the original. The operating temperature range is -40°C to 70°C, which is suitable for most industrial applications but does not extend to the full 85°C upper limit of the original. This part carries RoHS Compliant certification and is recommended for new designs and standard replacement applications.

E2E-X2C2L8-M1: This part belongs to the E2E NEXT series, representing Omron's next-generation inductive proximity sensor platform. It maintains the full operating temperature range of -40°C to 85°C, matching the original specification. The voltage supply range is 10V to 30V, which is slightly narrower than the original 32V maximum but remains compatible with standard industrial power supplies. This part carries RoHS Compliant certification and is recommended for applications requiring extended temperature performance or where next-generation sensor technology is preferred.

Both substitute parts are currently in active production status, ensuring long-term availability and supply chain stability.

Frequently Asked Questions (FAQ)

Q: Can the E2A-S08LS02-M1-C2 be used as a direct replacement for the E2A-M08LS02-M1-C2?

A: Yes. Both parts share identical electrical specifications including 2mm sensing distance, NPN-NC 3-wire output, 1.5kHz response frequency, and M8 threaded connector termination. The primary difference is body material (stainless steel versus nickel-plated brass) and operating temperature upper limit (70°C versus 85°C). For applications operating below 70°C, this part provides direct functional replacement with improved corrosion resistance.

Q: What is the difference between the E2A series and E2E NEXT series substitutes?

A: The E2A-S08LS02-M1-C2 is a direct series equivalent within the E2A product line. The E2E-X2C2L8-M1 represents Omron's next-generation sensor platform (E2E NEXT series) with enhanced features and extended product lifecycle. Both maintain identical core sensing specifications and M8 connector compatibility. The E2E NEXT part supports the full -40°C to 85°C temperature range of the original.

Q: Are there any voltage supply compatibility concerns?

A: The E2A-S08LS02-M1-C2 maintains the original 10V to 32V supply range. The E2E-X2C2L8-M1 operates at 10V to 30V. Both ranges are compatible with standard industrial 24V DC power supplies. If your application requires operation at 31V or 32V, the E2A-S08LS02-M1-C2 is the appropriate selection.

Q: Do the substitute parts maintain the same M8 connector interface?

A: Yes. All three parts feature M8 threaded connector termination with identical mechanical specifications. No changes to wiring harnesses or connector assemblies are required for substitution.

Q: What is the significance of RoHS Compliance on the substitute parts?

A: Both substitute parts carry RoHS Compliant certification, indicating compliance with the Restriction of Hazardous Substances directive. The original E2A-M08LS02-M1-C2 lists RoHS status as Vendor Undefined. For applications subject to RoHS requirements or environmental regulations, the substitute parts provide certified compliance.

Q: Can both substitute parts be used interchangeably in the same application?

A: Yes, provided the application operating temperature does not exceed 70°C. If sustained operation above 70°C is required, the E2E-X2C2L8-M1 is the appropriate selection. Both parts maintain identical sensing distance, output type, response frequency, and connector interface specifications.