Equivalent & Substitute Parts for DRC9114T0L

Part Overview

The DRC9114T0L is a pre-biased NPN bipolar transistor manufactured by Panasonic Electronic Components, designed for surface mount applications in the SSMini3-F3-B package. This device operates at a maximum collector-emitter voltage of 50 V with a maximum collector current of 100 mA and power dissipation of 125 mW. The part is discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives that maintain electrical and mechanical compatibility for existing designs.

Substiute Parts

DRC9114T0L

Panasonic Electronic ComponentsIn Stock: 347134DRC9114T0L Datasheet

Current PartRFQ

DTC014TEBTL

Rohm SemiconductorIn Stock: 8907DTC014TEBTL Datasheet

SimilarRFQ

PDTC114TM,315

PhilipsIn Stock: 60988PDTC114TM,315 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DRC9114T0L is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Transistor type: NPN - Pre-Biased configuration
• Maximum collector current: 100 mA
• Maximum collector-emitter breakdown voltage: 50 V
• Base resistor value: 10 kOhms
• Collector cutoff current: 500 nA maximum

Mechanical Equivalence Criteria:

• Surface mount packaging in SC-89 or SOT-490 case styles
• Moisture sensitivity level: 1 (Unlimited)

Compliance Criteria:

• RoHS compliance status
• ECCN classification: EAR99

The substitute parts identified below meet all electrical and mechanical parameters specified for the DRC9114T0L. Variations in secondary parameters such as DC current gain, saturation voltage, power dissipation, and transition frequency do not preclude substitution when the primary parameters remain within specification.

Parameter Comparison

Engineering Selection Recommendations

DTC014TEBTL (Rohm Semiconductor): This substitute provides complete electrical and mechanical equivalence to the DRC9114T0L. The part maintains identical maximum collector current (100 mA), collector-emitter breakdown voltage (50 V), and base resistor value (10 kOhms). The DTC014TEBTL is currently active in production with ROHS3 compliance certification and unlimited moisture sensitivity rating. The package designation (EMT3F, SOT-416FL) is compatible with the original SC-89, SOT-490 specification. This part is recommended as the primary substitute due to active product status and full compliance documentation.

PDTC114TM,315 (Philips): This substitute is listed as an active product with EAR99 classification and REACH unaffected status. However, complete electrical parameter specifications are not provided in the available documentation. This part is identified as a substitute based on the original manufacturer's part listing but should be cross-referenced against detailed datasheets to confirm full parameter equivalence before implementation in new designs.

Frequently Asked Questions (FAQ)

Q: Can the DTC014TEBTL directly replace the DRC9114T0L in existing PCB designs?

A: Yes. Both parts share identical maximum collector current (100 mA), collector-emitter breakdown voltage (50 V), base resistor value (10 kOhms), and collector cutoff current (500 nA). Both are surface mount devices with SC-89/SOT-490 package compatibility and unlimited moisture sensitivity rating. The DTC014TEBTL is electrically and mechanically interchangeable.

Q: What is the difference in DC current gain between the DRC9114T0L and DTC014TEBTL?

A: The DRC9114T0L specifies a minimum DC current gain (hFE) of 160 at 5 mA collector current and 10 V collector-emitter voltage. The DTC014TEBTL specifies a minimum of 100 under the same conditions. This difference does not prevent substitution; however, circuit designs that depend on specific gain characteristics should be evaluated against the lower gain specification of the DTC014TEBTL.

Q: Are there package compatibility concerns when substituting these parts?

A: Both the DRC9114T0L and DTC014TEBTL are specified for SC-89 and SOT-490 package designations. The DTC014TEBTL supplier device package is listed as EMT3F (SOT-416FL), which is compatible with the original specification. No package-related modifications to PCB layouts are required.

Q: What is the compliance status of the substitute parts?

A: The DTC014TEBTL carries ROHS3 compliance certification, which supersedes the RoHS compliance of the original DRC9114T0L. Both parts are classified as EAR99 for export control purposes. The DTC014TEBTL is REACH unaffected. These compliance statuses support direct substitution in regulated applications.

Q: Why is the PDTC114TM,315 listed as a substitute if specifications are incomplete?

A: The PDTC114TM,315 is included because it appears in the original manufacturer's substitute list for the DRC9114T0L. However, incomplete parameter documentation limits verification of full electrical equivalence. Detailed datasheets should be consulted before selecting this part for new designs.

Q: What is the inventory status of substitute parts?

A: The DTC014TEBTL has 8,800 pieces in stock as new original inventory. The PDTC114TM,315 has 60,910 pieces in stock. Both parts are available for immediate procurement, addressing the discontinuation of the original DRC9114T0L.