Eaton - Bussmann DP25-GY Equivalent & Substitute Parts Reference

Part Overview

The Eaton - Bussmann Electrical Division DP25-GY terminal block is a 2-position, feed-through connector for 12-22 AWG wire, featuring a screw termination style and a polyamide (PA66) insulation body in gray. It supports 24 A (IEC) or 25 A (UL) with voltage ratings of 630V (IEC) and 600V (UL). The DP25-GY is now listed as obsolete, necessitating the identification of alternative terminal block models with identical electrical and mechanical characteristics and comparable compliance. Substituting this part ensures continued system compatibility and reliable performance in terminal block installations.

Substiute Parts

DP25-GY

Eaton - Bussmann Electrical DivisionIn Stock: 759DP25-GY Datasheet

Current PartRFQ

1037720000

WeidmüllerIn Stock: 14211037720000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute candidate selection for Eaton - Bussmann DP25-GY terminal blocks is constrained to products matching the following supplied parameters:

• Category: Terminal Blocks
• Type: Feed Through
• Number of Positions: 2
• Number of Levels: 1
• Terminal Width: 5.1mm
• Termination Style: Screw
• Electrical ratings (Current / Voltage, IEC and UL)
• Wire gauge compatibility (AWG / mm²)
• Color and insulation material specification
• Material flammability rating

The substitute part listed (Weidmüller 1037720000) aligns with these criteria as provided.

Parameter Comparison

Engineering Selection Recommendations

The Eaton - Bussmann DP25-GY terminal block is obsolete. The listed substitute, Weidmüller 1037720000, is active and provided in bulk packaging. Both parts meet UL94 V-0 flammability standards and share industry electrical certification ratings and categorizations. RoHS and REACH status are specified for the substitute part. Selection shall be based on verified status, certifications, and material compliance as provided.

Frequently Asked Questions (FAQ)

Q1: What are the key parameters when selecting a substitute for Eaton - Bussmann DP25-GY?
A1: Substitution relies on category, type, position and level count, terminal width, termination style, electrical ratings, wire gauge range, color, insulation material, and flammability rating.

Q2: How does the termination style affect substitution compatibility?
A2: Both the original and substitute parts utilize screw termination, supporting direct interchange in installation methodology.

Q3: Are there packaging differences to consider?
A3: Both models are specified for bulk packaging. Ensure inventory format matches system assembly requirements.

Q4: Is material flammability rating identical between the parts?
A4: Both parts are compliant with UL94 V-0 flammability standards.

Q5: Do substitute parts accommodate the same wire sizes?
A5: The substitute part covers a wider AWG range (12-30 AWG) but less in mm² (0.5-4mm²). Selection must match specific system wiring.

Q6: Does product status affect component selection?
A6: The original is obsolete; the substitute is active, which permits ongoing availability for supply chain reliability.

Q7: Are international compliance standards, such as RoHS and REACH, considered?
A7: The substitute part lists RoHS and REACH compliance in the provided data. The original does not specify compliance. Selectively apply based on system requirements.