DP0150ALP4-7 Equivalent & Substitute Parts

Part Overview

The DP0150ALP4-7 is a PNP bipolar junction transistor manufactured by Diodes Incorporated, rated for 50 V collector-emitter breakdown voltage and 100 mA maximum collector current. This device is packaged in a 3-XFDFN surface mount configuration and is classified as obsolete. Due to its obsolete status, equivalent and substitute parts are necessary for ongoing design support, production continuity, and component sourcing. Active alternatives with comparable electrical characteristics and compatible packaging are available from multiple manufacturers.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Collector-Emitter Breakdown Voltage (Max)	50	V
Collector Current (Max)	100	mA
Power Dissipation (Max)	450	mW
Transition Frequency	80	MHz
Operating Temperature Range	−55 to 150	°C
Mounting Type	Surface Mount	—
Package / Case	3-XFDFN	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of the DP0150ALP4-7 is determined by the following critical parameters:

Electrical Compatibility Criteria:

Transistor type must be PNP
Collector-emitter breakdown voltage must be greater than or equal to 50 V
Maximum collector current must be greater than or equal to 100 mA
Transition frequency must support the operating bandwidth requirements
Operating temperature range must encompass −55°C to 150°C

Mechanical Compatibility Criteria:

Surface mount mounting type
Package footprint compatibility (3-XFDFN or equivalent land pattern)

Regulatory Compliance:

RoHS3 compliance required
Moisture sensitivity level MSL 1 (Unlimited)

Substitute parts are grouped into two categories based on package type: (1) parts maintaining the 3-XFDFN package footprint, and (2) parts in alternative surface mount packages (SOT-883) that provide electrical equivalence with different mechanical form factors.

Parameter Comparison

Part Number	Manufacturer	Vce(BR) Max (V)	Ic Max (mA)	Power Max (mW)	Frequency (MHz)	Package	Status
DP0150ALP4-7	Diodes Incorporated	50	100	450	80	3-XFDFN	Obsolete
BC857BLP4-7B	Diodes Incorporated	45	100	250	100	3-XFDFN	Active
BC856BMBYL	Nexperia USA Inc.	60	100	250	100	3-XFDFN	Active
2PA1774QM,315	Nexperia USA Inc.	40	100	430	100	SOT-883	Active
2PA1774RM,315	Nexperia USA Inc.	40	100	430	100	SOT-883	Active
2PA1774SM,315	NXP Semiconductors	40	100	430	100	SOT-883	Active
BC857AM,315	Nexperia USA Inc.	45	100	150	100	SOT-883	Active
BC857AMB,315	Nexperia USA Inc.	45	100	250	100	3-XFDFN	Active
BC857BM,315	Nexperia USA Inc.	45	100	150	100	SOT-883	Active
BC857CM,315	Nexperia USA Inc.	45	100	150	100	SOT-883	Active

Engineering Selection Recommendations

Primary Substitutes (Same Package, 3-XFDFN):

BC857BLP4-7B and BC857AMB,315 maintain the 3-XFDFN package footprint, enabling direct board-level replacement without layout modification. BC857BLP4-7B is manufactured by Diodes Incorporated (same manufacturer as the original part) and is in active production status. BC856BMBYL, also in 3-XFDFN package, provides the highest voltage rating (60 V) among available substitutes and is AEC-Q101 qualified for automotive applications.

Secondary Substitutes (Alternative Package, SOT-883):

The 2PA1774 series (QM, RM, SM variants) and BC857 series in SOT-883 package provide electrical equivalence with different mechanical form factors. These parts require PCB layout redesign to accommodate the SOT-883 footprint. The 2PA1774 series offers AEC-Q101 automotive qualification and higher power dissipation capability (430 mW). BC857AM,315, BC857BM,315, and BC857CM,315 are available in SOT-883 with lower power ratings (150 mW) and are suitable for applications with reduced thermal requirements.

Compliance Considerations:

All substitute parts listed are RoHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating, matching the original part's environmental specifications. Parts designated with automotive grade (2PA1774 series and BC856BMBYL) carry AEC-Q101 qualification, suitable for automotive and high-reliability applications.

Frequently Asked Questions (FAQ)

Q: Can BC857BLP4-7B directly replace DP0150ALP4-7 on the PCB?

A: Yes. BC857BLP4-7B maintains the same 3-XFDFN package and land pattern as DP0150ALP4-7, enabling direct board-level substitution without layout changes. Both parts are manufactured by Diodes Incorporated and share compatible pinout and thermal characteristics.

Q: What is the voltage rating difference between DP0150ALP4-7 and its substitutes?

A: DP0150ALP4-7 is rated for 50 V collector-emitter breakdown voltage. BC857BLP4-7B and BC857AMB,315 are rated for 45 V, while BC856BMBYL is rated for 60 V. The 2PA1774 series is rated for 40 V. Selection depends on circuit voltage requirements; parts with lower ratings cannot be used in circuits exceeding their breakdown voltage specification.

Q: Are SOT-883 package substitutes compatible with existing PCB layouts designed for 3-XFDFN?

A: No. SOT-883 and 3-XFDFN packages have different footprints and land patterns. Substitution with SOT-883 parts requires PCB redesign and layout modification. Use SOT-883 alternatives only when PCB layout changes are feasible or when the original 3-XFDFN package substitutes are unavailable.

Q: Which substitute part is recommended for automotive applications?

A: BC856BMBYL and the 2PA1774 series (2PA1774QM,315, 2PA1774RM,315, 2PA1774SM,315) carry AEC-Q101 automotive qualification. BC856BMBYL maintains the 3-XFDFN package and offers the highest voltage rating (60 V). The 2PA1774 series requires SOT-883 package accommodation but provides higher power dissipation (430 mW).

Q: What is the impact of lower power dissipation ratings in substitute parts?

A: DP0150ALP4-7 is rated for 450 mW maximum power dissipation. BC857BLP4-7B, BC856BMBYL, and BC857AMB,315 are rated for 250 mW, while BC857AM,315, BC857BM,315, and BC857CM,315 are rated for 150 mW. Lower power ratings require verification that circuit operating conditions do not exceed the substitute part's thermal limits. The 2PA1774 series maintains 430 mW rating, closely matching the original part.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed are RoHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating, matching the environmental and regulatory specifications of DP0150ALP4-7.

Q: What is the difference between BC857 variants (AM, BM, CM)?

A: BC857AM,315, BC857BM,315, and BC857CM,315 differ in DC current gain (hFE) specifications. BC857AM,315 has minimum hFE of 125 @ 2mA, 5V; BC857BM,315 has minimum hFE of 220 @ 2mA, 5V; BC857CM,315 has minimum hFE of 420 @ 2mA, 5V. Selection depends on circuit gain requirements and biasing conditions.

Q: Can DP0150ALP4-7 be used in new designs, or must substitutes be selected?

A: DP0150ALP4-7 is classified as obsolete and should not be selected for new designs. Active substitute parts such as BC857BLP4-7B, BC856BMBYL, or the 2PA1774 series are recommended for new product development to ensure long-term component availability and production continuity.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message