DMT3006LFDF-13 Equivalent & Substitute Parts

Part Overview

The DMT3006LFDF-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 30V drain-to-source voltage with 14.1A continuous drain current at 25°C. This device is housed in a 6-UDFN surface mount package with exposed pad and is qualified to AEC-Q101 automotive standards. The part is currently active in production with 14,770 units in stock.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the same device family, allowing for procurement flexibility, inventory optimization, or supply chain continuity.

Substiute Parts

DMT3006LFDF-13

Diodes IncorporatedIn Stock: 14840DMT3006LFDF-13 Datasheet

Current PartRFQ

DMT3006LFDF-7

Diodes IncorporatedIn Stock: 4497DMT3006LFDF-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DMT3006LFDF-13 is based on strict equivalence across the following electrical and mechanical parameters:

Electrical Equivalence Criteria:

• Drain-to-source voltage rating (Vdss): 30V
• Continuous drain current (Id): 14.1A at 25°C
• On-resistance (Rds On): 7mOhm maximum at specified conditions
• Gate threshold voltage (Vgs(th)): 3V maximum
• Gate charge (Qg): 22.6nC maximum
• Input capacitance (Ciss): 1320pF maximum
• Power dissipation: 800mW maximum
• Operating temperature range: -55°C to 150°C

Mechanical Equivalence Criteria:

• Package type: 6-UDFN Exposed Pad (U-DFN2020-6 Type F)
• Mounting type: Surface Mount
• FET technology: N-Channel MOSFET (Metal Oxide)

Compliance Equivalence Criteria:

• Automotive grade qualification: AEC-Q101
• RoHS3 compliance
• Moisture sensitivity level: 1 (Unlimited)

The substitute part DMT3006LFDF-7 maintains identical electrical specifications and package configuration. The only difference is the packaging format: the main part uses Tape & Reel (TR) while the substitute uses Tape & Box (TB). Both formats are standard distribution methods for surface mount components and do not affect electrical performance or board-level compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the DMT3006LFDF-13 and DMT3006LFDF-7 are active production parts from Diodes Incorporated with identical electrical and thermal specifications. Selection between these parts is determined by packaging and supply requirements rather than electrical performance.

DMT3006LFDF-13 (Tape & Reel): Suitable for high-volume automated assembly operations where components are fed directly from tape reels into pick-and-place equipment. This format minimizes handling and is standard for production environments.

DMT3006LFDF-7 (Tape & Box): Suitable for lower-volume applications, prototyping, or environments where box packaging is preferred for component storage and traceability. Both formats contain components on identical tape specifications.

Both parts maintain full compliance with AEC-Q101 automotive qualification and RoHS3 environmental standards. The choice between them does not affect circuit performance, thermal management, or reliability characteristics. Substitution is electrically and mechanically transparent at the board level.

Frequently Asked Questions (FAQ)

Q: Can DMT3006LFDF-7 be used as a direct replacement for DMT3006LFDF-13 in production?

A: Yes. Both parts are electrically and mechanically identical. The only difference is the packaging format (Tape & Box versus Tape & Reel). At the component level, they perform identically in circuit applications. The choice depends on assembly process requirements and supply chain logistics.

Q: Are there any thermal or electrical performance differences between these parts?

A: No. Both parts have identical electrical specifications including Vdss (30V), Id (14.1A), Rds On (7mOhm), gate charge (22.6nC), and power dissipation (800mW). Thermal performance and operating temperature range (-55°C to 150°C) are identical.

Q: Do both parts use the same package footprint?

A: Yes. Both use the 6-UDFN Exposed Pad package (U-DFN2020-6 Type F). PCB layout, solder pad dimensions, and thermal via requirements are identical. No design changes are required when substituting between these parts.

Q: Are both parts AEC-Q101 qualified?

A: Yes. Both DMT3006LFDF-13 and DMT3006LFDF-7 carry AEC-Q101 automotive qualification and are suitable for automotive applications requiring this certification.

Q: What is the difference between Tape & Reel and Tape & Box packaging?

A: Tape & Reel (TR) format supplies components on continuous tape wound on a reel, optimized for automated high-speed assembly lines. Tape & Box (TB) format supplies the same tape in a protective box, suitable for lower-volume production, manual assembly, or component storage. Both formats use identical component tape specifications and do not affect electrical performance.

Q: Can I mix these parts in the same production batch?

A: Yes. Since both parts are electrically and mechanically identical, they can be used interchangeably in the same circuit design and production batch without any impact on functionality or reliability.

Q: Are there any compliance or certification differences?

A: No. Both parts are ROHS3 compliant, have MSL rating of 1 (Unlimited), and carry identical automotive qualifications. Compliance status is identical between the two parts.