DGD05062FN-7 Equivalent & Substitute Parts

Part Overview

The DGD05062FN-7 is a half-bridge gate driver IC manufactured by Diodes Incorporated, designed for synchronous N-channel MOSFET applications in power management circuits. This device operates with a supply voltage range of 8V to 14V and provides dual-channel gate driving capability with non-inverting input configuration. The part is currently listed as obsolete, making identification of compatible substitute components essential for ongoing design support and production continuity.

Substiute Parts

DGD05062FN-7

Diodes IncorporatedIn Stock: 4110DGD05062FN-7 Datasheet

Current PartRFQ

DGD0506AFN-7

Diodes IncorporatedIn Stock: 3790DGD0506AFN-7 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DGD05062FN-7 is determined by strict alignment across the following critical parameters:

• Driven configuration (half-bridge topology)
• Channel type (synchronous dual-channel)
• Gate type (N-channel MOSFET)
• Supply voltage range (8V ~ 14V)
• Logic voltage thresholds (VIL 0.8V, VIH 2.4V)
• High side bootstrap voltage rating (50V maximum)
• Package type (10-WFDFN Exposed Pad)
• Operating temperature range (-40°C ~ 125°C)
• Regulatory compliance (ROHS3, REACH Unaffected)

The DGD0506AFN-7 meets all substitution criteria. This part shares identical electrical specifications, package configuration, and compliance certifications with the main part. The primary distinction is product status: DGD0506AFN-7 is active and available, whereas DGD05062FN-7 is obsolete.

Parameter Comparison

Engineering Selection Recommendations

The DGD0506AFN-7 is the direct substitute for the obsolete DGD05062FN-7. Both parts are manufactured by Diodes Incorporated and maintain identical electrical performance across all critical gate driver parameters. The substitute part carries active product status with current manufacturing support and availability.

Both parts satisfy ROHS3 compliance and REACH regulatory requirements. The DGD0506AFN-7 is supplied in Tape & Reel packaging, suitable for automated assembly processes. Selection of the active substitute part ensures long-term supply chain reliability and access to manufacturer technical support.

Frequently Asked Questions (FAQ)

Q: Can DGD0506AFN-7 be used as a direct replacement for DGD05062FN-7?

A: Yes. Both parts share identical electrical specifications, package configuration, and operating parameters. The substitute part is functionally equivalent and pin-compatible.

Q: What is the difference between the input types listed for these parts?

A: DGD05062FN-7 specifies non-inverting input, while DGD0506AFN-7 specifies CMOS/TTL input. Both operate within the same logic voltage thresholds (VIL 0.8V, VIH 2.4V) and are compatible with standard digital control signals.

Q: Are there packaging differences between these parts?

A: Both parts use the 10-WFDFN Exposed Pad surface mount package. DGD0506AFN-7 is supplied in Tape & Reel format, which is standard for production quantities.

Q: Why is DGD05062FN-7 listed as obsolete?

A: Product obsolescence is determined by the manufacturer. The active substitute DGD0506AFN-7 provides equivalent functionality and is recommended for new designs and production continuity.

Q: Are the peak output current specifications identical?

A: Source current is identical at 1.5A. Sink current differs: DGD05062FN-7 provides 2.5A, while DGD0506AFN-7 provides 2.0A. Both values are sufficient for standard half-bridge gate driver applications within the specified supply voltage range.