DF60-8PCFA Equivalent & Substitute Parts

Part Overview

The DF60-8PCFA is a blade contact connector from Hirose Electric's EnerBee™ DF60 series, designed for 8 AWG wire gauge applications with gold-plated crimp termination. This component is classified as Last Time Buy, indicating discontinued production with limited remaining inventory. Identifying equivalent and substitute parts is essential for design continuity, long-term supply chain planning, and ensuring uninterrupted production schedules.

Substiute Parts

DF60-8PCFA

Hirose Electric Co LtdIn Stock: 1411DF60-8PCFA Datasheet

Current PartRFQ

DF60-8PCFA(07)

Hirose Electric Co LtdIn Stock: 1256DF60-8PCFA(07) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DF60-8PCFA is determined by strict alignment of the following critical parameters:

• Wire Gauge: 8 AWG (electrical current capacity and contact geometry)
• Contact Type: Blade (mechanical interface and connector compatibility)
• Contact Termination: Crimp (assembly method and contact retention)
• Contact Finish: Gold (electrical conductivity and corrosion resistance)
• Contact Finish Thickness: 8.00µin (0.203µm) (performance specification)
• Series: EnerBee™ DF60 (mechanical and electrical compatibility)
• RoHS Compliance: Required for regulatory adherence

The substitute part DF60-8PCFA(07) maintains identical electrical and mechanical specifications while offering improved product status and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The DF60-8PCFA(07) is the direct substitute for the DF60-8PCFA. Both parts share identical electrical and mechanical specifications, ensuring functional interchangeability within the EnerBee™ DF60 connector system.

The primary distinction is product lifecycle status: DF60-8PCFA is Last Time Buy with 1323 units in stock, while DF60-8PCFA(07) is Active with 1225 units available. The substitute part carries ROHS3 Compliant certification and REACH Unaffected status, providing enhanced regulatory compliance for long-term supply chain stability.

For new designs or production planning beyond current inventory levels, DF60-8PCFA(07) is the appropriate selection. For existing designs currently specified with DF60-8PCFA, transition to DF60-8PCFA(07) is supported without design modification.

Frequently Asked Questions (FAQ)

Q: Are DF60-8PCFA and DF60-8PCFA(07) mechanically interchangeable?

A: Yes. Both parts are blade contacts within the EnerBee™ DF60 series with identical wire gauge (8 AWG), crimp termination, and gold contact finish. They are mechanically and electrically interchangeable.

Q: What is the difference between RoHS and ROHS3 compliance?

A: Both certifications restrict hazardous substances in electrical and electronic equipment. ROHS3 represents the current regulatory standard with updated substance restrictions. DF60-8PCFA(07) meets the more recent ROHS3 requirement.

Q: Why is DF60-8PCFA marked as Last Time Buy?

A: Last Time Buy status indicates the manufacturer has discontinued this part number. Existing inventory is available for purchase, but no future production is planned. DF60-8PCFA(07) is the active replacement.

Q: Can I use DF60-8PCFA(07) in designs currently specified for DF60-8PCFA?

A: Yes. The substitute part maintains all critical electrical and mechanical parameters. No design changes are required for substitution.

Q: What does REACH Unaffected mean?

A: REACH Unaffected indicates the part is not subject to REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) restrictions. This simplifies compliance documentation for regulated applications.

Q: Are there packaging differences between these parts?

A: No. Both parts are supplied in Cut Tape (CT) packaging, maintaining identical handling and storage requirements.