DF60-1012PCA Equivalent & Substitute Parts

Part Overview

The DF60-1012PCA is a blade contact connector from Hirose Electric's EnerBee™ DF60 series, designed for 10-12 AWG wire gauge applications with gold-plated crimp termination. This component is classified as Last Time Buy, indicating discontinued production with limited remaining inventory. Identifying equivalent and substitute parts is essential for design continuity, long-term supply chain planning, and ensuring uninterrupted production schedules.

Substiute Parts

DF60-1012PCA

Hirose Electric Co LtdIn Stock: 814DF60-1012PCA Datasheet

Current PartRFQ

DF60-1012PCA(07)

Hirose Electric Co LtdIn Stock: 1204DF60-1012PCA(07) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DF60-1012PCA is determined by strict alignment of the following critical parameters:

• Wire Gauge Compatibility: 10-12 AWG
• Contact Type: Blade configuration
• Termination Method: Crimp
• Contact Finish: Gold plating at 8.00µin (0.203µm) thickness
• Series Compatibility: EnerBee™ DF60
• Regulatory Compliance: RoHS Compliant status

The substitute part DF60-1012PCA(07) maintains identical electrical and mechanical specifications across all critical parameters, ensuring direct functional equivalence within the EnerBee™ DF60 product family.

Parameter Comparison

Engineering Selection Recommendations

The DF60-1012PCA(07) is the designated manufacturer substitute for the DF60-1012PCA. Both parts maintain identical electrical and mechanical specifications, including wire gauge, contact finish, and termination method. The primary distinction is product status: the original part is Last Time Buy with 739 units in stock, while the substitute is Active with 1,192 units available. For new designs and long-term supply requirements, DF60-1012PCA(07) is the appropriate selection. Both parts satisfy RoHS compliance requirements and are suitable for applications requiring gold-plated blade contacts in the 10-12 AWG range.

Frequently Asked Questions (FAQ)

Q: Can DF60-1012PCA(07) be used as a direct replacement for DF60-1012PCA?

A: Yes. Both parts are identical in electrical and mechanical specifications, including wire gauge (10-12 AWG), contact type (blade), termination method (crimp), and contact finish (gold at 8.00µin thickness). The substitute is the manufacturer-recommended equivalent.

Q: What is the difference between DF60-1012PCA and DF60-1012PCA(07)?

A: The parts are functionally equivalent. The primary difference is product status: DF60-1012PCA is Last Time Buy, while DF60-1012PCA(07) is Active. The designation "(07)" indicates a revision or variant within the same product family.

Q: Are both parts RoHS compliant?

A: Yes. Both DF60-1012PCA and DF60-1012PCA(07) are RoHS Compliant and meet regulatory requirements for restricted substances.

Q: What wire gauges are supported by these connectors?

A: Both parts support 10-12 AWG wire gauge applications with crimp termination.

Q: Why should I transition to DF60-1012PCA(07)?

A: The original DF60-1012PCA is Last Time Buy with limited inventory (739 units). DF60-1012PCA(07) is the active equivalent with greater availability (1,192 units), ensuring supply continuity for ongoing production and future designs.

Q: Are there any packaging differences between these parts?

A: Both parts are supplied in Bulk packaging. No packaging format differences exist between the two variants.