DF11-6DS-2DSA(01) Equivalent & Substitute Parts

Part Overview

The DF11-6DS-2DSA(01) is a 6-position receptacle connector manufactured by Hirose Electric Co Ltd, designed for board-to-board or cable applications with 0.079" (2.00mm) pitch spacing. This connector features through-hole mounting, press-fit and solder termination options, and gold-plated mating contacts rated for 2A at 250V. The part is currently obsolete, making identification of equivalent and substitute components essential for ongoing system support and new design implementations.

Substiute Parts

DF11-6DS-2DSA(01)
Hirose Electric Co LtdIn Stock: 1253DF11-6DS-2DSA(01) Datasheet
DF11-6DS-2DSA(01)
Current Part
DF11-6DS-2DSA(06)
Hirose Electric Co LtdIn Stock: 23879DF11-6DS-2DSA(06) Datasheet
DF11-6DS-2DSA(06)
Direct
SWR204-NRTN-D03-ST-GA
Sullins Connector SolutionsIn Stock: 2695SWR204-NRTN-D03-ST-GA Datasheet
SWR204-NRTN-D03-ST-GA
MFR Recommended

Key Parameters

Parameter Value
Connector Type Receptacle
Contact Type Female Socket
Number of Positions 6
Pitch - Mating 0.079" (2.00mm)
Number of Rows 2
Row Spacing - Mating 0.079" (2.00mm)
Mounting Type Through Hole
Current Rating 2A
Voltage Rating 250V
Operating Temperature -30°C ~ 85°C
Contact Finish - Mating Gold
Material Flammability Rating UL94 V-0

Substitute Part Grouping Explanation

Substitution for the DF11-6DS-2DSA(01) is determined by the following critical parameters: connector type (receptacle), contact type (female socket), number of positions (6), mating pitch (0.079" / 2.00mm), number of rows (2), row spacing (0.079" / 2.00mm), mounting type (through hole), current rating (2A minimum), voltage rating (250V minimum), and operating temperature range (-30°C to 85°C minimum). The substitute parts identified maintain these core electrical and mechanical specifications, ensuring functional compatibility in applications originally designed for the DF11-6DS-2DSA(01).

Parameter Comparison

Parameter DF11-6DS-2DSA(01) DF11-6DS-2DSA(06) SWR204-NRTN-D03-ST-GA
Manufacturer Hirose Electric Co Ltd Hirose Electric Co Ltd Sullins Connector Solutions
Connector Type Receptacle Receptacle Header
Contact Type Female Socket Female Socket Male Pin
Number of Positions 6 6 6
Pitch - Mating 0.079" (2.00mm) 0.079" (2.00mm) 0.079" (2.00mm)
Number of Rows 2 2 2
Row Spacing - Mating 0.079" (2.00mm) 0.079" (2.00mm) 0.079" (2.00mm)
Mounting Type Through Hole Through Hole Through Hole
Current Rating 2A 2A 3A per Contact
Voltage Rating 250V 250V 50V
Operating Temperature -30°C ~ 85°C -30°C ~ 85°C -25°C ~ 85°C
Contact Finish - Mating Gold Gold Tin
Material Flammability Rating UL94 V-0 UL94 V-0 UL94 V-0
Product Status Obsolete Active Active
RoHS Status RoHS non-compliant ROHS3 Compliant ROHS3 Compliant

Engineering Selection Recommendations

The DF11-6DS-2DSA(06) is the primary direct equivalent for the obsolete DF11-6DS-2DSA(01). Both parts are manufactured by Hirose Electric Co Ltd within the DF11 series and maintain identical electrical and mechanical specifications. The DF11-6DS-2DSA(06) is currently in active production status with ROHS3 compliance, making it the preferred choice for new designs and ongoing system support.

The SWR204-NRTN-D03-ST-GA from Sullins Connector Solutions is a complementary substitute suitable for applications where a mating header connector is required. This part shares the same pitch, row configuration, and through-hole mounting characteristics. However, the SWR204-NRTN-D03-ST-GA operates at a reduced voltage rating of 50V compared to the 250V rating of the DF11 series, and features male pins rather than female sockets. This part is appropriate only for applications where voltage requirements do not exceed 50V and where a header connector interface is acceptable.

Frequently Asked Questions (FAQ)

Q: Can the DF11-6DS-2DSA(06) be used as a direct replacement for the DF11-6DS-2DSA(01)?

A: Yes. Both parts are identical in electrical and mechanical specifications, including connector type, contact configuration, pitch, current rating, voltage rating, and operating temperature range. The DF11-6DS-2DSA(06) is the active production equivalent.

Q: What is the primary difference between the DF11-6DS-2DSA(01) and DF11-6DS-2DSA(06)?

A: The DF11-6DS-2DSA(01) is obsolete with RoHS non-compliant status, while the DF11-6DS-2DSA(06) is in active production with ROHS3 compliance. The contact finish on the post differs: nickel for the (01) variant and tin for the (06) variant.

Q: When is the SWR204-NRTN-D03-ST-GA appropriate as a substitute?

A: The SWR204-NRTN-D03-ST-GA is suitable only when a mating header connector is required and the application voltage does not exceed 50V. This part cannot be used in applications requiring the full 250V rating of the DF11 series.

Q: Are there packaging differences between substitute parts?

A: The DF11-6DS-2DSA(01) packaging is unspecified. The DF11-6DS-2DSA(06) is supplied in Tray packaging. The SWR204-NRTN-D03-ST-GA is supplied in Bulk packaging.

Q: What compliance certifications apply to these parts?

A: All three parts carry UL94 V-0 material flammability ratings. The DF11-6DS-2DSA(01) is RoHS non-compliant. Both the DF11-6DS-2DSA(06) and SWR204-NRTN-D03-ST-GA are ROHS3 compliant. All parts are REACH unaffected and classified as EAR99.

Request Quote (Ships tomorrow)