DF11-10DP-2DSA(87) Equivalent & Substitute Parts

Part Overview

The DF11-10DP-2DSA(87) is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for through-hole board-to-board or cable applications. This shrouded 10-position connector with 2.00mm pitch and detent lock fastening is actively produced and widely used in electronic assemblies requiring reliable vertical header connections. Substitute parts are identified to provide alternative sourcing options, inventory availability, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

DF11-10DP-2DSA(87)

Hirose Electric Co LtdIn Stock: 901DF11-10DP-2DSA(87) Datasheet

Current PartRFQ

SWR204-NRTN-D05-ST-GA

Sullins Connector SolutionsIn Stock: 13985SWR204-NRTN-D05-ST-GA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DF11-10DP-2DSA(87) are identified based on strict electrical and mechanical parameter alignment. The primary substitution criteria include:

• Connector Configuration: 10-position, 2-row header with 2.00mm pitch spacing
• Contact Specifications: Male pin contacts with brass material and tin finish
• Mounting & Fastening: Through-hole mounting with detent lock fastening and 4-wall shrouding
• Electrical Performance: Voltage and current ratings sufficient for the application
• Environmental Compliance: UL94 V-0 flammability rating and RoHS compliance
• Thermal Range: Operating temperature compatibility within specified limits

The SWR204-NRTN-D05-ST-GA from Sullins Connector Solutions meets these core substitution criteria, maintaining identical pitch, position count, row configuration, contact type, shrouding style, and fastening mechanism.

Parameter Comparison

Engineering Selection Recommendations

Both the DF11-10DP-2DSA(87) and SWR204-NRTN-D05-ST-GA are active products with current manufacturing status and full RoHS compliance. The Hirose DF11-10DP-2DSA(87) provides a 250V voltage rating and operates across a -30°C to 85°C temperature range. The Sullins SWR204-NRTN-D05-ST-GA offers higher current capacity at 3A per contact and operates within -25°C to 85°C, with a 50V voltage rating.

Selection between these parts depends on specific application voltage and temperature requirements. The DF11-10DP-2DSA(87) is suitable for applications requiring higher voltage tolerance, while the SWR204-NRTN-D05-ST-GA accommodates higher current loads. Both connectors maintain identical mechanical footprints, pitch spacing, and fastening characteristics, ensuring direct physical and functional interchangeability in board designs.

Frequently Asked Questions (FAQ)

Q: Can the SWR204-NRTN-D05-ST-GA directly replace the DF11-10DP-2DSA(87) in existing designs?

A: Yes, both connectors share identical mechanical specifications including 10-position, 2-row configuration, 2.00mm pitch, through-hole mounting, 4-wall shrouding, and detent lock fastening. PCB footprints are directly compatible. Electrical compatibility depends on application voltage and current requirements.

Q: What are the key electrical differences between these parts?

A: The DF11-10DP-2DSA(87) is rated for 250V and 2A, while the SWR204-NRTN-D05-ST-GA is rated for 50V and 3A per contact. Applications requiring voltages above 50V must use the Hirose part. Applications requiring current above 2A per contact can utilize the Sullins part.

Q: Are there temperature range considerations for substitution?

A: The DF11-10DP-2DSA(87) operates from -30°C to 85°C, while the SWR204-NRTN-D05-ST-GA operates from -25°C to 85°C. Applications requiring operation below -25°C require the Hirose part.

Q: Do both parts meet the same compliance standards?

A: Both parts are RoHS compliant, UL94 V-0 rated, and have MSL 1 (Unlimited) moisture sensitivity levels. The Sullins part carries ROHS3 compliance, while the Hirose part carries standard RoHS compliance.

Q: What is the difference in insulation material between these connectors?

A: The DF11-10DP-2DSA(87) uses Polyamide (PA) Nylon, while the SWR204-NRTN-D05-ST-GA uses Polyamide (PA66) Nylon 6/6. Both materials provide equivalent mechanical and electrical insulation properties for standard applications.