D5D10L Solid State Relay - Equivalent & Substitute Parts

Part Overview

The D5D10L is a solid state relay (SSR) manufactured by Sensata Technologies, configured as a SPST-NO (Single Pole Single Throw - Normally Open) relay in a hockey puck package. This component is rated for 10A load current with input voltage range of 4.6 to 32VDC and load voltage capability from 0V to 500V. The D5D10L is currently in Last Time Buy status, indicating production discontinuation. Identifying equivalent substitute parts is necessary to ensure continued availability and support for applications currently utilizing this component.

Substiute Parts

D5D10L

Sensata TechnologiesIn Stock: 956D5D10L Datasheet

Current PartRFQ

D5D10

Sensata-CrydomIn Stock: 898D5D10 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The D5D10L can be substituted with the D5D10 (Sensata-Crydom) based on the following substitution criteria:

Matching Electrical Parameters:

• Circuit configuration: SPST-NO (1 Form A)
• Output type: DC
• Input voltage range: 4.6 ~ 32VDC
• Load current rating: 10 A
• On-state resistance: 550 mOhms (maximum)
• Load voltage capability: 1 V ~ 500 V (D5D10 minimum is 1V versus D5D10L minimum of 0V)

Matching Mechanical Parameters:

• Mounting type: Chassis Mount
• Termination style: Screw Terminal
• Package type: Hockey Puck

Compliance Alignment:

• RoHS3 Compliant
• REACH Unaffected
• ECCN: EAR99

The D5D10 represents the active production equivalent within the same product family, with the primary difference being the minimum load voltage specification (1V versus 0V).

Parameter Comparison

Engineering Selection Recommendations

The D5D10 (Sensata-Crydom) is the direct substitute for the D5D10L. Selection of the D5D10 is supported by:

• Active product status, ensuring ongoing availability and supply chain continuity
• Identical electrical ratings for input voltage, load current, and on-state resistance
• Identical mechanical configuration and termination style
• Equivalent RoHS3 and REACH compliance certifications
• Membership in the same product family (1-DC series versus 1-DCL series)

The single technical variance is the minimum load voltage specification: the D5D10 operates from 1V minimum load voltage, while the D5D10L operates from 0V. Applications requiring operation below 1V load voltage must retain the D5D10L or evaluate alternative component families.

Frequently Asked Questions (FAQ)

Q: Can the D5D10 directly replace the D5D10L in existing designs?

A: The D5D10 is electrically and mechanically compatible with the D5D10L for applications where the load voltage remains at or above 1V. The primary difference is the minimum load voltage specification (1V for D5D10 versus 0V for D5D10L). Verify your application's minimum load voltage requirement before substitution.

Q: What is the difference between the D5D10L and D5D10 part numbers?

A: Both components are SPST-NO solid state relays in hockey puck packages with identical 10A load current ratings and 550 mOhms maximum on-state resistance. The D5D10L is manufactured by Sensata Technologies and is in Last Time Buy status. The D5D10 is manufactured by Sensata-Crydom and maintains active production status. The load voltage range differs slightly: D5D10L operates from 0V to 500V, while D5D10 operates from 1V to 500V.

Q: Are the hockey puck packages identical between D5D10L and D5D10?

A: Both components use the hockey puck package with chassis mount configuration and screw terminal termination. The physical form factor and mounting interface are identical.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the D5D10L and D5D10 are ROHS3 Compliant and REACH Unaffected, with identical ECCN (EAR99) and HTSUS (8536.49.0080) classifications.

Q: Which part should be selected for new designs?

A: The D5D10 should be selected for new designs due to its active production status. The D5D10L is in Last Time Buy status and will not be available for future procurement.