D09S13A4PL00 Equivalent & Substitute Parts

Part Overview

The D09S13A4PL00 is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (FCI) in the Delta D series. This right-angle, through-hole solder connector features female sockets with a DE/E shell size (1) and is designed for signal applications requiring 5A current capacity at 300V. The connector maintains an operating temperature range of -55°C to 125°C and meets UL94 V-0 flammability standards.

This part is currently active in production with 728 units in stock. Identifying equivalent and substitute parts is essential for supply chain continuity, design flexibility, and compliance with evolving regulatory requirements such as RoHS standards.

Substiute Parts

D09S13A4PL00

Amphenol ICC (FCI)In Stock: 833D09S13A4PL00 Datasheet

Current PartRFQ

D09S13A4PL00LF

Amphenol ICC (FCI)In Stock: 1063D09S13A4PL00LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for D-Sub connectors is determined by strict alignment of electrical and mechanical parameters. The D09S13A4PL00 can be substituted with parts that maintain identical specifications in the following critical areas:

Electrical Compatibility:

• Connector type (receptacle, female sockets)
• Number of positions (9)
• Current rating (5A minimum per contact)
• Voltage rating (300V minimum)
• Operating temperature range (-55°C to 125°C minimum)

Mechanical Compatibility:

• Shell size and layout (1, DE/E)
• Mounting type (through hole, right angle)
• Termination method (solder)
• Flange feature (M3 housing/shell)
• Contact material (phosphor bronze)
• Dielectric material (thermoplastic)

Regulatory Compliance:

• Flammability rating (UL94 V-0)
• Moisture sensitivity level (MSL 1)

Variations in shell finish (tin plated versus tin-nickel plated) and RoHS compliance status do not affect functional substitution when all other parameters remain constant.

Parameter Comparison

Engineering Selection Recommendations

Both D09S13A4PL00 and D09S13A4PL00LF are active production parts from Amphenol ICC (FCI) within the Delta D series. They are electrically and mechanically interchangeable for all functional applications requiring 9-position D-Sub receptacle connectors with the specified electrical and thermal ratings.

The primary distinction between these parts is regulatory compliance status. The D09S13A4PL00LF carries RoHS compliance certification, while the D09S13A4PL00 is RoHS non-compliant. Additionally, the D09S13A4PL00LF features a tin-nickel plated shell finish compared to the tin-plated finish of the D09S13A4PL00. These differences do not affect electrical performance or mechanical compatibility.

Selection between these parts should be based on applicable regulatory requirements for the end application and supply chain availability. The D09S13A4PL00LF is preferred for applications subject to RoHS directives or equivalent environmental compliance standards.

Frequently Asked Questions (FAQ)

Q: Can D09S13A4PL00 and D09S13A4PL00LF be used interchangeably in the same circuit?

A: Yes. Both connectors maintain identical electrical specifications (5A current rating, 300V voltage rating, -55°C to 125°C operating temperature) and mechanical dimensions (9-position, DE/E shell size, through-hole right-angle mounting). They are functionally interchangeable.

Q: What is the difference between tin-plated and tin-nickel plated shell finishes?

A: Both finishes provide corrosion protection for the steel shell. Tin-nickel plating offers enhanced corrosion resistance in certain environmental conditions. The choice between finishes depends on application requirements and environmental exposure. Both finishes are compatible with the same contact materials and electrical performance.

Q: Does RoHS compliance affect connector performance?

A: RoHS compliance relates to material composition and the absence of restricted substances (lead, cadmium, mercury, etc.). It does not alter electrical performance, current capacity, voltage rating, or thermal characteristics. RoHS compliance is a regulatory and supply chain consideration, not a functional performance factor.

Q: Are the backset spacing measurements identical?

A: The backset spacing is specified as 0.409" (10.39mm) for D09S13A4PL00 and 0.409" (10.40mm) for D09S13A4PL00LF. This 0.01mm difference is within standard manufacturing tolerances and does not affect mechanical compatibility or PCB layout requirements.

Q: What does MSL 1 (Unlimited) mean?

A: Moisture Sensitivity Level 1 indicates the lowest moisture sensitivity classification. Parts with MSL 1 have unlimited shelf life and do not require special moisture-controlled storage or handling procedures prior to soldering.

Q: Can these connectors be used in high-temperature applications?

A: Both connectors are rated for operating temperatures up to 125°C. Applications requiring sustained operation at or near this temperature limit should verify that all associated components and PCB materials are similarly rated for the intended thermal environment.