CW0106K000JS73 Equivalent & Substitute Parts

Part Overview

The CW0106K000JS73 is a 6 kOhms ±5% 13W through-hole resistor manufactured by Vishay Dale in the CW series. This axial wirewound resistor features moisture-resistant construction and operates across a wide temperature range from -65°C to 350°C. The part is currently active in production. Substitute parts are necessary to address packaging format requirements, compliance certifications, or inventory availability while maintaining identical electrical and mechanical specifications.

Substiute Parts

CW0106K000JS73

Vishay DaleIn Stock: 878CW0106K000JS73 Datasheet

Current PartRFQ

CW0106K000JE73

Vishay DaleIn Stock: 2182CW0106K000JE73 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The CW0106K000JE73 qualifies as a direct substitute based on the following criteria:

All electrical parameters are identical: 6 kOhms resistance, ±5% tolerance, 13W power rating, ±30ppm/°C temperature coefficient, and -65°C to 350°C operating temperature range.

All mechanical parameters are identical: axial package configuration, 0.375" Dia x 1.781" L dimensions, 2 terminations, and moisture-resistant wirewound composition.

The only difference is packaging format: CW0106K000JS73 is supplied in Tape & Reel (TR) format, while CW0106K000JE73 is supplied in Cut Tape (CT) format. Both formats contain the identical component.

Parameter Comparison

Engineering Selection Recommendations

CW0106K000JE73 is the preferred substitute when ROHS3 compliance and REACH unaffected status are required for end applications. Both parts maintain identical electrical performance and mechanical compatibility. Selection between Tape & Reel and Cut Tape formats depends on assembly process requirements and volume considerations. CW0106K000JS73 remains suitable for applications where RoHS non-compliance is acceptable and REACH affected status does not present regulatory constraints.

Frequently Asked Questions (FAQ)

Q: Are CW0106K000JS73 and CW0106K000JE73 electrically identical?

A: Yes. Both parts have identical resistance (6 kOhms), tolerance (±5%), power rating (13W), temperature coefficient (±30ppm/°C), and operating temperature range (-65°C to 350°C).

Q: What is the difference between these two part numbers?

A: The primary difference is packaging format. CW0106K000JS73 is supplied in Tape & Reel format, while CW0106K000JE73 is supplied in Cut Tape format. Additionally, CW0106K000JE73 carries ROHS3 compliance and REACH unaffected status, whereas CW0106K000JS73 is RoHS non-compliant and REACH affected.

Q: Can I use CW0106K000JE73 as a direct replacement for CW0106K000JS73 in my circuit?

A: Yes, from an electrical and mechanical standpoint. The component specifications are identical. Verify that your assembly process can accommodate the Cut Tape packaging format if switching from Tape & Reel.

Q: Which part should I select for new designs?

A: Selection depends on regulatory requirements. If ROHS3 compliance and REACH unaffected status are mandatory, use CW0106K000JE73. If these certifications are not required, either part is suitable based on packaging format availability.

Q: Are the physical dimensions identical?

A: Yes. Both parts measure 0.375" Dia x 1.781" L (9.52mm x 45.24mm) and use identical axial package configuration with 2 terminations.