CW010330R0JS67 Equivalent & Substitute Parts

Part Overview

The CW010330R0JS67 is a 330 Ohm, 13W wirewound axial resistor manufactured by Vishay Dale. This through-hole component features moisture-resistant construction and operates across a wide temperature range from -65°C to 350°C. The part is currently active in production and available in Tape & Reel packaging. Identifying equivalent substitute parts is essential for procurement flexibility, supply chain continuity, and managing inventory across different packaging formats while maintaining identical electrical and mechanical performance.

Substiute Parts

CW010330R0JS67

Vishay DaleIn Stock: 1058CW010330R0JS67 Datasheet

Current PartRFQ

CW010330R0JE73

Vishay DaleIn Stock: 4244CW010330R0JE73 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CW010330R0JS67 are determined by strict equivalence across all critical electrical and mechanical parameters. The substitution criteria are:

• Resistance value: 330 Ohms
• Tolerance: ±5%
• Power rating: 13W
• Composition: Wirewound
• Package/Case: Axial
• Temperature coefficient: ±30ppm/°C
• Operating temperature range: -65°C to 350°C
• Physical dimensions: 0.375" Dia x 1.781" L (9.52mm x 45.24mm)
• Moisture resistance: Required
• Number of terminations: 2

The CW010330R0JE73 meets all these criteria and qualifies as a parametric equivalent. The primary difference between these parts is packaging format: the main part is supplied in Tape & Reel configuration, while the substitute is available in Cut Tape format. Both parts are manufactured by Vishay Dale within the CW series and maintain identical electrical performance and physical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the CW010330R0JS67 and CW010330R0JE73 are active production parts from Vishay Dale with identical electrical specifications and physical dimensions. Selection between these parts should be based on packaging requirements and regulatory compliance needs.

The CW010330R0JS67 in Tape & Reel format is suitable for high-volume automated assembly operations. The CW010330R0JE73 in Cut Tape format provides flexibility for lower-volume applications or manual assembly processes.

Regulatory compliance differs between the two parts. The CW010330R0JE73 offers ROHS3 compliance and REACH unaffected status, making it preferable for applications subject to European Union environmental regulations. The CW010330R0JS67 is RoHS non-compliant and REACH affected, which may restrict its use in certain markets or applications with strict compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can CW010330R0JE73 be used as a direct replacement for CW010330R0JS67?

A: Yes. Both parts are electrically and mechanically identical with matching resistance values, power ratings, temperature coefficients, operating temperature ranges, and physical dimensions. The only differences are packaging format and regulatory compliance status.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous tape wound on reels, optimized for automated pick-and-place assembly. Cut Tape packaging provides components on tape segments cut to specific lengths, suitable for manual assembly or lower-volume production runs. Both formats contain the same component.

Q: Does the packaging format affect electrical performance?

A: No. Packaging format is a supply and handling consideration only. The electrical and thermal characteristics of the resistor remain identical regardless of whether it is supplied in Tape & Reel or Cut Tape format.

Q: Why does CW010330R0JE73 have different RoHS and REACH status?

A: RoHS and REACH compliance status reflects the manufacturing process, materials sourcing, and supply chain documentation at the time of production. These certifications are independent of the component's electrical specifications and do not affect performance in the circuit.

Q: Which part should I select for a new design?

A: Selection depends on your specific requirements. For automated assembly with high-volume production, use CW010330R0JS67 in Tape & Reel format. For applications requiring ROHS3 compliance or REACH unaffected status, use CW010330R0JE73 in Cut Tape format. Both parts deliver identical electrical performance.

Q: Are there any thermal or frequency limitations that differ between these parts?

A: No. Both parts share identical temperature coefficients of ±30ppm/°C and operate across the same temperature range of -65°C to 350°C. No frequency-dependent parameters are specified for either part.