Equivalent & Substitute Parts for CW0101R000JS67

Part Overview

The CW0101R000JS67 is a 1 Ohm, 13W wirewound axial resistor manufactured by Vishay Dale. This component is designed for through-hole applications requiring moisture-resistant performance across an operating temperature range of -65°C to 350°C. The part is currently active in production with 631 units available in tape and reel packaging. Substitute parts are necessary to accommodate different packaging requirements, compliance certifications, or inventory availability across supply chain channels.

Substiute Parts

CW0101R000JS67

Vishay DaleIn Stock: 664CW0101R000JS67 Datasheet

Current PartRFQ

CW0101R000JE12

Vishay DaleIn Stock: 828CW0101R000JE12 Datasheet

DirectRFQ

CW0101R000JE73

Vishay DaleIn Stock: 2398CW0101R000JE73 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CW0101R000JS67 is determined by strict equivalence across the following critical parameters: resistance value (1 Ohms), tolerance (±5%), power rating (13W), composition (wirewound), package type (axial), temperature coefficient (±50ppm/°C), operating temperature range (-65°C to 350°C), physical dimensions (0.375" Dia x 1.781" L), and moisture-resistant features. All substitute parts listed maintain identical electrical and mechanical specifications, differing only in packaging format (tape & reel, bulk, or cut tape) and compliance certifications. Both substitute parts are manufactured by Vishay Dale within the same CW series and are classified as active products.

Parameter Comparison

Engineering Selection Recommendations

All three parts are active products from Vishay Dale's CW series with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and compliance certifications.

The CW0101R000JS67 is suitable for applications where tape and reel packaging is required for automated assembly processes. This part carries RoHS non-compliant and REACH Affected designations.

The CW0101R000JE12 provides bulk packaging and achieves ROHS3 compliance with REACH Unaffected status, making it appropriate for applications with regulatory compliance requirements.

The CW0101R000JE73 offers cut tape packaging with ROHS3 compliance and REACH Unaffected status, providing flexibility for both manual and semi-automated assembly while meeting environmental regulations. This part maintains the highest current inventory level at 2324 units.

Frequently Asked Questions (FAQ)

Q: Can CW0101R000JE12 and CW0101R000JE73 be used interchangeably with CW0101R000JS67 in circuit applications?

A: Yes. All three parts are electrically and mechanically identical, with matching resistance (1 Ohm), tolerance (±5%), power rating (13W), temperature coefficient (±50ppm/°C), and operating temperature range (-65°C to 350°C). Substitution is valid from a functional standpoint. Differences exist only in packaging format and compliance certifications.

Q: What is the primary difference between these substitute parts?

A: The main differences are packaging format and regulatory compliance. CW0101R000JS67 uses tape and reel packaging; CW0101R000JE12 uses bulk packaging; CW0101R000JE73 uses cut tape packaging. Additionally, CW0101R000JE12 and CW0101R000JE73 are ROHS3 compliant and REACH Unaffected, while CW0101R000JS67 is RoHS non-compliant and REACH Affected.

Q: Which substitute part should be selected for automated assembly?

A: CW0101R000JS67 (tape and reel) or CW0101R000JE73 (cut tape) are suitable for automated assembly processes. CW0101R000JE12 (bulk packaging) is typically used for manual or semi-automated assembly.

Q: Are there any compliance considerations when selecting a substitute?

A: Yes. If your application requires RoHS3 compliance or REACH Unaffected status, select either CW0101R000JE12 or CW0101R000JE73. The original part CW0101R000JS67 does not meet these certifications.

Q: Do all substitute parts have the same physical dimensions?

A: Yes. All three parts share identical physical dimensions of 0.375" Dia x 1.781" L (9.52mm x 45.24mm), ensuring compatibility with existing PCB layouts and mechanical assemblies.