CW010150R0JS67 Equivalent & Substitute Parts

Part Overview

The CW010150R0JS67 is a 150 Ohm, 13W axial wirewound resistor manufactured by Vishay Dale. This through-hole component features moisture-resistant construction and operates across a wide temperature range from -65°C to 350°C. The part is currently in active production status with 809 units available in stock. Substitute parts are identified when packaging format differs or when compliance requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

CW010150R0JS67

Vishay DaleIn Stock: 915CW010150R0JS67 Datasheet

Current PartRFQ

CW010150R0JE12

Vishay DaleIn Stock: 694CW010150R0JE12 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CW010150R0JS67 is determined by matching the following critical parameters:

• Resistance value: 150 Ohms
• Tolerance: ±5%
• Power rating: 13W
• Composition: Wirewound
• Package type: Axial
• Physical dimensions: 0.375" Dia x 1.781" L
• Temperature coefficient: ±30ppm/°C
• Operating temperature range: -65°C to 350°C
• Moisture-resistant feature requirement

The CW010150R0JE12 qualifies as a direct substitute. Both parts are manufactured by Vishay Dale within the CW series and share identical electrical characteristics and physical form factor. The primary distinction is packaging format: CW010150R0JS67 is supplied in Tape & Reel format, while CW010150R0JE12 is supplied in Bulk packaging. This packaging difference does not affect component performance or compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both CW010150R0JS67 and CW010150R0JE12 are active production components suitable for direct substitution based on electrical and mechanical compatibility. Selection between these parts should be based on procurement requirements and packaging format needs.

The CW010150R0JS67 in Tape & Reel packaging is appropriate for automated assembly processes and high-volume production environments. The CW010150R0JE12 in Bulk packaging is suitable for manual assembly, prototyping, or applications where individual component handling is preferred.

Compliance considerations: CW010150R0JS67 is RoHS non-compliant and REACH Affected. CW010150R0JE12 is RoHS3 Compliant and REACH Unaffected. Applications subject to RoHS or REACH regulatory requirements should specify CW010150R0JE12.

Frequently Asked Questions (FAQ)

Q: Can CW010150R0JE12 be used as a direct replacement for CW010150R0JS67 in existing designs?

A: Yes. Both parts share identical electrical specifications (150 Ohms, ±5%, 13W), temperature characteristics (±30ppm/°C, -65°C to 350°C operating range), and physical dimensions (0.375" Dia x 1.781" L). The only difference is packaging format. Circuit performance and reliability are equivalent.

Q: What is the significance of the packaging format difference?

A: CW010150R0JS67 is supplied in Tape & Reel format, designed for automated pick-and-place assembly equipment. CW010150R0JE12 is supplied in Bulk format, suitable for manual handling and assembly. The component itself is identical; packaging affects only the procurement and assembly process.

Q: Are there compliance differences between these parts?

A: Yes. CW010150R0JS67 is RoHS non-compliant and REACH Affected. CW010150R0JE12 is RoHS3 Compliant and REACH Unaffected. For applications requiring RoHS or REACH compliance, CW010150R0JE12 must be specified.

Q: Do these resistors have identical moisture resistance properties?

A: Yes. Both CW010150R0JS67 and CW010150R0JE12 feature moisture-resistant construction. This characteristic is maintained regardless of packaging format.

Q: Can inventory levels influence part selection?

A: Inventory availability may affect procurement timelines. CW010150R0JS67 has 809 units in stock, while CW010150R0JE12 has 651 units available. However, part selection should prioritize compliance requirements and assembly process compatibility over inventory levels.