Equivalent & Substitute Parts for CW01010R00JS67

Part Overview

The CW01010R00JS67 is a 10 Ohm, 13W wirewound axial resistor manufactured by Vishay Dale. This component is designed for through-hole applications requiring moisture-resistant performance across an operating temperature range of -65°C to 350°C. The part is currently active in production with 713 units in stock.

Substitute parts are necessary when the original packaging format (Tape & Reel) is unavailable or when alternative compliance certifications are required for specific applications or supply chain requirements.

Substiute Parts

CW01010R00JS67

Vishay DaleIn Stock: 821CW01010R00JS67 Datasheet

Current PartRFQ

CW01010R00JE12

Vishay DaleIn Stock: 1180CW01010R00JE12 Datasheet

DirectRFQ

CW01010R00JE73

Vishay DaleIn Stock: 3642CW01010R00JE73 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CW01010R00JS67 is determined by the following critical parameters:

• Resistance value: 10 Ohms (exact match required)
• Tolerance: ±5% (exact match required)
• Power rating: 13W (exact match required)
• Composition: Wirewound (exact match required)
• Package type: Axial (exact match required)
• Temperature coefficient: ±30ppm/°C (exact match required)
• Operating temperature range: -65°C to 350°C (exact match required)
• Physical dimensions: 0.375" Dia x 1.781" L (exact match required)
• Moisture resistance feature: Required (exact match required)

The identified substitute parts CW01010R00JE12 and CW01010R00JE73 meet all electrical and mechanical parameters. The primary differences are packaging format (Bulk and Cut Tape respectively, versus the original Tape & Reel) and regulatory compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

All three parts are active products from Vishay Dale with identical electrical and mechanical specifications. Selection between them is based on packaging requirements and regulatory compliance status.

CW01010R00JE12 (Bulk packaging) and CW01010R00JE73 (Cut Tape packaging) both achieve ROHS3 compliance and REACH Unaffected status, making them suitable for applications with stricter environmental regulations. The CW01010R00JS67 (Tape & Reel packaging) is RoHS non-compliant and REACH Affected, requiring evaluation against specific application requirements.

Packaging format selection depends on assembly process requirements: Tape & Reel for automated pick-and-place operations, Cut Tape for semi-automated or manual assembly, and Bulk for manual assembly or reel consolidation.

Frequently Asked Questions (FAQ)

Q: Can CW01010R00JE12 or CW01010R00JE73 be used as direct replacements for CW01010R00JS67?

A: Yes. Both substitute parts are electrically and mechanically identical to the main part. All critical parameters including resistance, tolerance, power rating, temperature coefficient, operating temperature range, and physical dimensions are identical. The differences are packaging format and regulatory compliance certifications.

Q: What is the difference between Tape & Reel, Cut Tape, and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, optimized for automated assembly equipment. Cut Tape (CT) packaging provides the same carrier tape but pre-cut into smaller quantities. Bulk packaging supplies loose components without carrier tape, suitable for manual assembly or custom reel preparation.

Q: Does the packaging format affect electrical performance?

A: No. Packaging format is a supply and assembly consideration only. The component itself performs identically regardless of packaging format.

Q: Why do the substitute parts have different RoHS and REACH certifications?

A: RoHS and REACH compliance status reflects the manufacturing process and material sourcing at the time of production. These certifications are independent of the component's electrical and mechanical performance. Selection should be based on application regulatory requirements.

Q: Which substitute part should I select if inventory is critical?

A: CW01010R00JE73 (Cut Tape) has the highest current inventory at 3589 units, followed by CW01010R00JE12 (Bulk) at 1138 units, and CW01010R00JS67 (Tape & Reel) at 713 units.