CRCW0805976RFKEBC Equivalent & Substitute Parts

Part Overview

The CRCW0805976RFKEBC is a 976 Ohm ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This component is currently active in production with 810 pieces in stock. Equivalent and substitute parts are necessary to ensure design flexibility, manage supply chain continuity, and accommodate specific application requirements such as automotive qualification or enhanced moisture resistance.

Substiute Parts

CRCW0805976RFKEBC

Vishay DaleIn Stock: 873CRCW0805976RFKEBC Datasheet

Current PartRFQ

MCR10ERTF9760

Rohm SemiconductorIn Stock: 7601MCR10ERTF9760 Datasheet

DirectRFQ

CR0805-FX-9760ELF

Bourns Inc.In Stock: 20917CR0805-FX-9760ELF Datasheet

UpgradeRFQ

KTR10EZPF9760

Rohm SemiconductorIn Stock: 9609KTR10EZPF9760 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW0805976RFKEBC is determined by strict equivalence across the following parameters: resistance value (976 Ohms), tolerance (±1%), power rating (0.125W), package type (0805), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and compliance certifications (ROHS3, REACH Unaffected, EAR99).

The substitute parts listed below meet all these core electrical and mechanical requirements. Variations in product status, packaging format (Tape & Reel vs. Cut Tape), physical height, and optional features (moisture resistance, automotive qualification) do not affect functional equivalence but may influence selection based on application-specific needs.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts are electrically and mechanically equivalent to the CRCW0805976RFKEBC and meet identical compliance requirements (ROHS3, REACH Unaffected, EAR99).

MCR10ERTF9760 (Rohm Semiconductor) is currently discontinued at DiGi Electronics, making it unsuitable for new designs requiring long-term availability.

CR0805-FX-9760ELF (Bourns Inc.) is active in production with the highest inventory level (20,823 pieces) and includes moisture-resistant composition. This part is suitable for general applications and environments requiring enhanced moisture protection.

KTR10EZPF9760 (Rohm Semiconductor) is active in production and qualified to AEC-Q200 automotive standards with high voltage capability. This part is appropriate for automotive and high-reliability applications.

Frequently Asked Questions (FAQ)

Q: Can MCR10ERTF9760 be used as a direct replacement for CRCW0805976RFKEBC?

A: MCR10ERTF9760 meets all electrical and mechanical specifications for direct substitution. However, this part is discontinued at DiGi Electronics, limiting its suitability for ongoing production or future procurement.

Q: What is the difference between CR0805-FX-9760ELF and the main part?

A: CR0805-FX-9760ELF is functionally equivalent with identical electrical parameters. The primary difference is the addition of moisture-resistant composition and higher inventory availability. Physical height is identical at 0.024" (0.60mm).

Q: Is KTR10EZPF9760 suitable for non-automotive applications?

A: Yes. KTR10EZPF9760 meets all core electrical and mechanical requirements for the 976 Ohm 0805 resistor specification. The AEC-Q200 automotive qualification and high voltage features are additional capabilities that do not restrict use in standard applications.

Q: Are there packaging differences between these parts?

A: CRCW0805976RFKEBC and CR0805-FX-9760ELF are supplied in Tape & Reel (TR) format. MCR10ERTF9760 is supplied in Cut Tape (CT) & Digi-Reel® format. KTR10EZPF9760 is supplied in Tape & Reel (TR) format. All are compatible with standard pick-and-place assembly equipment.

Q: Do height differences affect PCB layout?

A: CRCW0805976RFKEBC and CR0805-FX-9760ELF have maximum seated height of 0.024" (0.60mm). MCR10ERTF9760 and KTR10EZPF9760 have maximum seated height of 0.026" (0.65mm). This 0.002" (0.05mm) difference is negligible for standard PCB designs and does not require layout modifications.