CM06FD302FO3 Equivalent & Substitute Parts

Part Overview

The CM06FD302FO3 is a 3000 pF mica capacitor rated for 500 V operation in a through-hole radial package, manufactured by Cornell Dubilier Electronics (CDE). This component is in active product status and provides general-purpose capacitive functionality with high-frequency stability and low-loss characteristics inherent to mica dielectric construction. Alternative models may be required due to inventory availability, series discontinuation, or supply chain optimization while maintaining identical electrical and mechanical performance.

Substiute Parts

CM06FD302FO3

Cornell Dubilier Electronics (CDE)In Stock: 1109CM06FD302FO3 Datasheet

Current PartRFQ

CD19FD302FO3

Cornell Dubilier Electronics (CDE)In Stock: 724CD19FD302FO3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CM06FD302FO3 is restricted to components meeting the following criteria:

Critical Parameters (Must Match Exactly):

• Capacitance: 3000 pF
• Voltage Rating: 500 V
• Tolerance: ±1%
• Dielectric Material: Mica
• Package Type: Radial, Through Hole
• Lead Spacing: 0.343" (8.70 mm)
• Physical Dimensions: 0.681" L × 0.280" W (17.30 mm × 7.10 mm)
• Maximum Seated Height: 0.551" (14.00 mm)
• Operating Temperature Range: -55°C to 125°C

The CD19FD302FO3 qualifies as a parametric equivalent by maintaining all critical electrical and mechanical specifications, permitting direct substitution in applications requiring identical performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the CM06FD302FO3 and CD19FD302FO3 maintain active product status from Cornell Dubilier Electronics and are fully interchangeable based on provided electrical and mechanical specifications. Both components share identical RoHS non-compliance status and REACH-affected designation. Selection between these parts should be based on supply chain availability and lead time requirements, as all functional and compliance characteristics are equivalent.

Frequently Asked Questions (FAQ)

Q: Can CD19FD302FO3 be directly substituted for CM06FD302FO3 in circuit applications?

A: Yes. The CD19FD302FO3 maintains identical capacitance (3000 pF), voltage rating (500 V), tolerance (±1%), temperature range (-55°C to 125°C), physical dimensions, lead spacing, and mounting configuration. Direct substitution is supported for applications meeting the original design specifications.

Q: What parameters must remain constant when selecting a substitute?

A: Capacitance value, voltage rating, tolerance specification, lead spacing (0.343"), physical envelope (0.681" × 0.280" × 0.551" max height), and operating temperature range must all match the original part. Deviations in any of these parameters disqualify a component from substitution.

Q: Are there any compliance or certification differences between these parts?

A: Both components share identical compliance status: RoHS non-compliant and REACH-affected. No differential compliance advantage exists between the two alternatives.

Q: Does moisture sensitivity affect installation or storage procedures?

A: The CM06FD302FO3 is MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for handling, storage, or installation procedures. The CD19FD302FO3 lists MSL as Not Applicable, indicating no moisture-related constraints. Both components may be stored and handled under standard environmental conditions without special moisture control measures.

This reference page is ready for direct insertion into a web Markdown editor and follows all specified formatting and content requirements.